Question about 1991 Dodge Ram 350

1 Answer

I need belt diagrams for a 1991 Dodge Ram Van B350. Full size-1ton van, 360 engine.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,757 Answers

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1991/make/dodge/model/ram_van/1991_dodge_ram_van_drive_belt_routing_diagram.htm

Posted on Mar 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant find the voltage regulator anywhere? Can you please help. 1991 b350 van dodge


not like the old days it does not have an external regulator-it is integral with the alternator now, use a digital voltage meter to read the output at the rear of the alternator (large post)-is should be about 14.2 volts.

Jun 23, 2011 | 1991 Dodge Ram 350

1 Answer

Fuse panel diagram Dodge B350 Van


you might find fuse diagram on the inside of the fuse box cover......cheers

Aug 11, 2010 | 1992 Dodge Ram 350

1 Answer

No oil pressure and knocking sound


This is a clear indication that an engine bearing has failed. Usually the cheapest way to resolve this is to find a used engine and have it installed if you feel that the van still has some usable life left in it.

Hope this helps,
Dave

Jul 03, 2010 | 1987 Dodge Ram Wagon B350

3 Answers

The oddometer works but the speedometer doesn't in my 1992 Dodge Ram pickup. The gear that sits inside the transmission is not stripped and engages fine. Can the problem be somewhere other than the...


Could be a bad cluster. If one is cable driven, and the other electric. You could have a bad speed sensor in the transmission which will make the speedo not work.

Jun 09, 2009 | 1992 Dodge Ram 250

1 Answer

Need diagram/schematic for serpentine belt replacement


Should be a tag on the core support somewhere that shows a diagram how to install your belt,usually its right on top where the radiator bolts to core support,open hood look down on top of support or its on the inside of hood open hood and look up see if theres a tag with a diagram of belt installation

Mar 22, 2009 | 1998 Dodge Ram

1 Answer

Need fuse box diagram for 91 dodge ram 150 van


i have the diagram for dodge ram van 250. don't know if it's the same, but i have it. find me at jhiggz11@yahoo.com

Mar 09, 2009 | 1991 Dodge Ram 150

2 Answers

Belt bypass too small


yes, there could be an "a/c delte" pulley out there that would go where the compressor was. double check that you are routing the belt right. all other pullies are the same. maybe your diagram is wrong or you are misinterpreting. (it happens to everyone) if you still can't get it, you can wrap a peice of string around all the pullies, measure the string, and ask for that size belt.

May 15, 2008 | 1996 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

516 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...