Question about 2002 Honda Passport

1 Answer

ABS Light stays on while driving. I had to hit the brakes hard once while the light was on and I heard what sounded like an audible alarm from the dash. The brakes seem to function fine otherwise. Any thoughts? I pretty handy and would like to take a shot at fixing the problem myself. I'm just not very confident in my diagnostic skills.

Posted by on

  • philschneide
    philschneide May 11, 2010

    Have you checked the fluid level in your ABS tank? The light often indicates that the level in too low. Incidentally, I don't know if this means anything, and you would probably have to call you dealer to find out, but the following URL seems to indicate some sort of service bulletins to Honda regarding your vehicle. Maybe nothing, but...http://www.edmunds.com/maintenance/recal...

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,985 Answers

The easiest way is to check it with a diagnostic reader and see which speed sensor or another fault is causing it to stay on

Posted on Nov 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS ON,BRAKE RED L ON ALARM ON HARD PEDAL HOW CAN I FIND THE PROBLEM


VSC ABS and ! lights plus red (!) - Toyota Prius Forum ...

www.priusonline.com/...toyota-prius.../19804-vsc-abs-lights-plus-red.ht...

Jun 3, 2008 - 8 posts - ‎3 authors
If the accumulator fails, you will get a red brake warning light and the pump will now run continuosly until it burns out. ... hydraulic pressure to the brake system and "no"red warning lights. .... Fog Lights, PassGas, Toyota Prius General Discussion, 4, 10-13-2005 09:12 AM ... 11-13-2015 10:01 PM by Tim Lee.

Alarm with Brake Light, ABS, VSC and amber warning lights ' PriusChat

priuschat.com > ... > Gen 2 Prius Care, Maintenance and Troubleshooting
Jul 26, 2005 - Later that same day - I started getting an alarm - as soon... ... Gen 2 (2004-2009) Toyota Prius Forums > Gen 2 Prius Care, ... Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by NorthStar, Jul 26, 2005. ... I am getting the red BRAKE LIGHT, the amber waming symbol, ABS, and ... VSC, ABS, (!) and emergency brake light on
Feb 5, 2010
Brake, Brake warning, ABS, VSC appear
Oct 5, 2008
More results from priuschat.com

Nov 24, 2015 | 2005 Toyota Prius

1 Answer

About a week ago, having switched on and set off, all the brake warning lights stayed on, that is the ABS, TCS, TCS OFF and Brake System Warning lights. The brakes continued to work OK with no extra travel...


abs=anti-lock brake system/ tcs=traction control system ==sounds like you have a problem with ur abs possible bad sensor or a wiring connection problem when abs shuts down [trouble light] your brakes will work normal but if u stomp or brake hard the brakes will lock up skid and the tcs doesnt affect brakes but if u accelerate hard tires will spin lose traction check the wiring and connections to the sensors sometimes debris hits the wire and loosens the connection if looks ok and light is on have car scanned for the trouble code most auto stores such as auto zone/advanced auto offer this service for free the code will what and where the problem is so repair can be made

Jul 18, 2010 | 2000 Mazda 626

1 Answer

My abs light stays on after a few mins of driving and stays on


I would scan it for body codes-eg. ABS codes. Just Brakes wouldn't be my choice for any repairs. Find a good ASE Certified local shop. Discribe the slipping,stalling and shuttering. Sounds more like a trans issue.

Mar 11, 2010 | 1991 Buick Park Avenue

1 Answer

Abs break light comes on when i move and stays on


possible wheel speed sensor problem. need to check codes and data with proper scan tool.

Jun 27, 2009 | 2001 Chevrolet Silverado 1500

2 Answers

1998 Ford Contour ABS light and one wheel partially braking


could be but not likely. sound like abs pump or abs ecu failure. to make sure check DTC's

Jun 02, 2009 | 2000 Ford Contour

1 Answer

Abs light turns on once in a while on my 1995 E150 conversion van


a bad wheel bearing will cause abs light to come on.

Apr 28, 2009 | 1993 Ford Econoline

2 Answers

ABS light and alarm constanly on


try changing your pads all round as they have sensors for each set of pads or just try and get a set of sensors

Dec 02, 2008 | 1993 Mazda RX-7

Not finding what you are looking for?
2002 Honda Passport Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...