Question about 2003 Kia Rio

2 Answers

My engine light is on, engine is running fine with no symptom noticed. ox sensor and knock sensor was change within a year. what next?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 166 Answers

U need to find out the cause why the MIL light is on, if u take the car to analyze by a computer they will tell you what are the trouble codes related to your troubles and see what needs to be replaced or fixed. its the best way to save money on unnecesary replacements
hope this helps

Posted on Nov 18, 2009

Testimonial: "i tough that there could be another way. I will look to buy a scan tool, with 3 vehicules at home it could be a good investment."

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Kia Master
  • 1,146 Answers

Hi:
Often the check engine light is on, and the car still drives fine. You need to stop by an auto parts store and have them scan the code for free, to tell you what caused it. It might be something simple as a loose gas cap, but you won't know till you get the code!

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p0325


P0325 Knock Sensor 1 Circuit Malfunction
A knock sensor tells the engine computer when one or more of your engine's cylinders are "knocking", that is, exploding the air/fuel mixture in a way that delivers less power and can be damaging to the engine if prolonged.
The computer uses this information to tune the engine so that it doesn't knock. If your knock sensor wasn't operating properly, so that it was always indicating a knock, the engine computer's response may have been to change the ignition timing on your engine. Knock sensors generally bolt into or thread into the engine block. This P0325 code may show up intermittently or the Service Engine light may be lit constantly. Other knock sensor related DTC codes include P0330.
Symptoms You may notice drivability problems including a lack of power and perhaps some hesitation. There may also be other symptoms.
Causes A code P0325 most likely means one or more of the following has happened:
  • The knock sensor is faulty and needs to be replaced
  • There is a wiring short/fault in the knock sensor circuit

Nov 20, 2016 | Cars & Trucks

1 Answer

Why is error code p0327


Code P0327 indicates that the readings from the #1 Knock Sensor circuit are too low, is outside of its operational window and malfunctioning. Symptoms
  • Check Engine Light will illuminate
  • Engine pings on accelration
  • Engine may be running hotter or colder than normal
  • In rare cases, the engine may not exhibit noticeable symptoms
Common Problems That Trigger the P0327 Code
  • Defective Knock Sensor
  • Defective Knock Sensor Circuit or connections
  • Defective EGR System
  • Malfunctioning Cooling System
  • Rich air/fuel ratio
Common Misdiagnosis
  • Knock Sensor replaced when cause of code P0327 was a cooling system problem
  • Knock Sensor replaced when cause of code P0327 was an EGR system malfunction

Sep 28, 2015 | 2005 Suzuki Forenza

1 Answer

Free mechanic advice


You replaced the knock sensor and not the fuel pump?? Change the fuel pump.

Feb 01, 2014 | Subaru Legacy Cars & Trucks

1 Answer

Have 1999 nissan maxima code #po325 an code#po400 ?dont know what is wrong with car, check engine light on?need help please


Technical Description

Knock Sensor Circuit Malfunction
What does that mean?

A knock sensor tells the engine computer when one or more of your engine's cylinders are "knocking", that is, exploding the air/fuel mixture in a way that delivers less power and can be damaging to the engine if prolonged. The computer uses this information to tune the engine so that it doesn't knock. If your knock sensor wasn't operating properly, so that it was always indicating a knock, the engine computer's response may have been to change the ignition timing on your engine. Knock sensors generally bolt into or thread into the engine block. This P0325 code may show up intermittently or the Service Engine light may be lit constantly. Other knock sensor related DTC codes include P0330.
FB.init("dd7d9e9681341cde77587bc6a2029f6f"); OBD-Codes.com on Facebook Symptoms

You may notice drivability problems including a lack of power and perhaps some hesitation. There may also be other symptoms.
Causes

A code P0325 most likely means one or more of the following has happened:

Possible Solutions
  • Check the resistance of the knock sensor (compare it to factory specs)
  • Check for broken/frayed wires leading to the sensor
  • Replace the knock sensor

Sources: W. Farmer - Nissan


P0400 - Exhaust Gas Recirculation Flow Malfunction OBD-II Trouble Code Technical Description

Exhaust Gas Recirculation Flow Malfunction
What does that mean?

The exhaust gas recirculation (EGR) valve is vacuum controlled valve that regulates the amount of exhaust gases that re-enter the cylinders. The powertrain control module (PCM) determines how much based on engine load, temp, and other conditions. If the PCM detects that the amount of exhaust gases entering the cylinder were insufficient or non-existent, this code is set.
FB.init("dd7d9e9681341cde77587bc6a2029f6f"); OBD-Codes.com on Facebook Symptoms

No symptoms will likely be noticed by the driver other than the MIL (malfunction indicator lamp). However, non visible symptoms will be increased combustion temperature and increased Nox emissions.
Causes

A code P0400 may mean that one or more of the following has happened:

  • Plugged EGR passage which restricts the flow of exhaust gasses
  • Faulty EGR solenoid
  • Faulty EGR solenoid wiring/harness
  • Vacuum lines damaged/disconnected to the EGR valve solenoid or to the EGR valve
  • Faulty EGR valve
Possible Solutions

Since EGR valve designs are different, no one test will suffice:

  • Using a scan tool, operate the EGR valve with the engine running. If the engine stumbles, the problem was likely intermittent wiring problem or intermittent blockage problem
  • If engine doesn't stumble, operate the EGR valve manually, if possible. If engine doesn't stumble and die, the ports are likely plugged. Removal of valve and cleaning of all ports will be required
  • Checking of solenoid can only usually be done with a scan tool, because most solenoids operate with a duty cycle of voltage, rather than constant voltage
  • Check all vacuum lines, hoses, etc for any damage
  • Visually inspect the solenoid harness and the solenoid for damage
  • Replace EGR valve

Dec 06, 2011 | Cars & Trucks

2 Answers

GMC 4.3L DTC P0330 flashing MIL


P0330 - Knock Sensor 2 Circuit Malfunction (Bank 2)
A knock sensor tells the engine computer when one or more of your engine's cylinders are "knocking", that is, exploding the air/fuel mixture in a way that delivers less power and can be damaging to the engine if prolonged. The computer uses this information to tune the engine so that it doesn't knock. If your knock sensor wasn't operating properly, so that it was always indicating a knock, the engine computer's response may have been to change the ignition timing on your engine. Knock sensors generally bolt into or thread into the engine block. This P0330 code may show up intermittently or the Service Engine light may be lit constantly. Other knock sensor related DTC codes include P0325.

Symptoms: You may notice drivability problems including a lack of power and perhaps some hesitation. There may also be other symptoms.

Causes: A code P0330 most likely means one or more of the following has happened:
The "B" knock sensor is faulty and needs to be replaced
There is a wiring short/fault in the knock sensor circuit

Possible Solutions:
Check the resistance of the knock sensor on bank 2 (compare it to factory specs)
Check for broken/frayed wires leading to the sensor
Replace the knock sensor on bank 2


Hope helps.

Aug 23, 2011 | GMC Safari Cars & Trucks

2 Answers

My Jeep Liberty Has a 3.7 L V6, it has problems starting. A code popped up that was P0325? What does this code mean?


CARB (California Air Resources Board) has a consistent policy regarding monitoring knock (Ks) sensors but vehicle manufacturers don't have a consistent way of using knock sensor circuitry. There are generally two methods that manufacturers have for using the knock sensor.
In the first design, which is found in most vehicles, the knock sensor plays an active role in controlling ignition timing. In this system, the PCM is advancing ignition timing until knock occurs and then retards timing slightly. This system runs on the verge of engine knock at all times. In this system the function of the knock sensor circuit is critical. If the sensor malfunctioned, precise ignition timing control could not be achieved.

A "dead" sensor circuit would not be able to detect actual knock, timing would be overly advanced, and NOX exhaust emissions would increase. For this reason, manufacturers that use the knock sensor in this manner are required to monitor this sensor and light the MIL light when a malfunction is detected.

In the second design, the knock sensor plays a very passive role and is really only on the engine for protection purposes. The various engine sensors send their information to the PCM to determine ignition timing. The PCM uses this information to control the ignition timing based on look-up tables stored in its memory. If ignition knock is detected, the PCM will take action and ****** the timing a few degrees. This type of control is generally used to control spark knock caused by changes in fuel octane.

Used in this way, the knock sensor is less critical to emissions and may not even have a measurable emission impact. Unlike the first design, a "dead" knock sensor in this system will have little to no effect on the operation of the engine. Manufacturers that use this design are not required to monitor the sensor under EPA OBDII regulations and will not turn on the MIL if the P0325 DTC is set.
Remember, this sensor does not change the operation of the engine. The customer will not notice any change in the way the vehicle operates. The knock sensor system has a one trip detection logic and WILL NOT turn on the MIL or store Freeze Frame data.

How to Diagnose P0325

Most technicians know how this type of sensor operates. Its element produces a voltage when the sensor picks up a vibration, usually caused by engine detonation.Technicians then check the ohmic value of the sensor.
Maybe this was of some help.Your valuable feedback would be appreciated.Thanks for choosing Fixya.

Jun 09, 2011 | 2003 Jeep Liberty

1 Answer

I have a code p0325 knock sensor 1, circuit bank 1 or single sensor problem


A knock sensor tells the engine computer when one or more of your engine's cylinders are "knocking", that is, exploding the air/fuel mixture in a way that delivers less power and can be damaging to the engine if prolonged. The computer uses this information to tune the engine so that it doesn't knock. If your knock sensor wasn't operating properly, so that it was always indicating a knock, the engine computer's response may have been to change the ignition timing on your engine. Knock sensors generally bolt into or thread into the engine block.

This P0325 code may show up intermittently or the Service Engine light may be lit constantly. Other knock sensor related DTC codes include P0330.

Symptoms: You may notice drivability problems including a lack of power and perhaps some hesitation. There may also be other symptoms.

Causes: A code P0325 most likely means one or more of the following has happened:
* The knock sensor is faulty and needs to be replaced
* There is a wiring short/fault in the knock sensor circuit

Possible Solutions
* Check the resistance of the knock sensor (compare it to factory specs)
* Check for broken/frayed wires leading to the sensor
* Replace the knock sensor


Test it and tell us news.

Mar 15, 2011 | 1999 Nissan Maxima

3 Answers

Diagnostic code po325 what does this mean


Hi the error code relates to the PCM Knock Sensor Circuit

A knock sensor tells the engine computer when one or more of your engine's cylinders are "knocking", that is, exploding the air/fuel mixture in a way that delivers less power and can be damaging to the engine if prolonged. The computer uses this information to tune the engine so that it doesn't knock. If your knock sensor wasn't operating properly, so that it was always indicating a knock, the engine computer's response may have been to change the ignition timing on your engine. The knock sensor generally threads into the engine block. This P0325 code may show up intermittently or the Service Engine light may be lit constantly.
Symptoms

You may notice drivability problems including a lack of power and perhaps some hesitation. There may also be other symptoms.
Causes

A code P0325 most likely means one or more of the following has happened:

* The knock sensor is faulty and needs to be replaced
* There is a wiring short/fault in the knock sensor circuit

Possible Solutions

* Check the resistance of the knock sensor (compare it to factory specs)
* Check for broken/frayed wires leading to the sensor
* Replace the knock sensor

Hope this helps
Steve

Mar 03, 2011 | 1993 Jeep Grand Cherokee

1 Answer

I have a 2004 pilot, VTS4 and engine light came on. i have a p0325 knock sensor circ. bank A. just replace the sensor?? also i can seem to find any diagrams. any help appreciated!!!


It does sound like the sensor may be bad, but you also need to check the wiring.
This information comes from:

http://www.obd-codes.com/p0325

P0325 OBD-II Trouble Code Technical Description

Knock Sensor Circuit Malfunction
What does that mean?

A knock sensor tells the engine computer when one or more of your engine's cylinders are "knocking", that is, exploding the air/fuel mixture in a way that delivers less power and can be damaging to the engine if prolonged. The computer uses this information to tune the engine so that it doesn't knock. If your knock sensor wasn't operating properly, so that it was always indicating a knock, the engine computer's response may have been to change the ignition timing on your engine. Knock sensors generally bolt into or thread into the engine block. This P0325 code may show up intermittently or the Service Engine light may be lit constantly. Other knock sensor related DTC codes include P0330.
FB.init("dd7d9e9681341cde77587bc6a2029f6f"); OBD-Codes.com on Facebook Symptoms

You may notice drivability problems including a lack of power and perhaps some hesitation. There may also be other symptoms.
Causes

A code P0325 most likely means one or more of the following has happened:

Possible Solutions
  • Check the resistance of the knock sensor (compare it to factory specs)
  • Check for broken/frayed wires leading to the sensor
  • Replace the knock sensor

Mar 02, 2011 | Honda Pilot Cars & Trucks

1 Answer

Check engine light won't go away


i read it could be the mass air flow sensor and or faulty spark plugs. also be sure to check all the little vaccum hoses for cracks.

Aug 02, 2008 | 2000 Mazda Protege

Not finding what you are looking for?
2003 Kia Rio Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...