Question about 2004 GMC Sierra

1 Answer

Passinger side tail light and tag light don't work. I replaced both bulbs and checked all fuses.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

For easy testing, purchase a low voltage test light. It resembles a screwdriver with a wire pigtail. Clip the aligator clip on the pigtail to a grounding point on the car and use the probe to test for power in your light sockets. If there's power, your problem could be loss of grounding. You need both a power wire and a grounding wire to complete the ciruit. Look for a damaged or severed grounding wire.

Posted on Nov 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse for tag lights on 88 chevy c1500 silverado


There is not a separate fuse. The tag light is powered off of the tail lights. If you have tail lights but no tag lights your problem is either bad tag light bulbs or the connections between the tail lights and the chassis ground at the tag light bulb sockets.

Dec 19, 2017 | Cars & Trucks

1 Answer

Where is the license plate ligt fuse on a 2002 rendezvous


It does not have a separate fuse, it is on the same fuse as your tail lights. If your tail lights are working and your tag light is not, then you will either have a bad tag light bulb or a bad wire, connection, or bulb socket.

Aug 25, 2015 | Cars & Trucks

1 Answer

1996 Lexus ES300 Tail lights won't work


usualy there is a faulty earth to the bulb cluster remove them and clean all the conectors spray the harness and cluster with wd40 or similer put all bulbs back in and see if that works but i would go with a bad earth hope this helps ivan uk

Oct 23, 2012 | 1996 Lexus ES 300

2 Answers

I have a 2000 chevy 2500 and the tail lights, tag lights and brake lights have stopped working, I checked the bulbs and they are good, fuses are good. Have not replaced the brake relay under the hood. Do I...


check for power at the wires going intop the tail lights, real common that the circuit board is bad, but unlikely both at the same time. The tag, tail lights and brakes are 2 different systems. Do the turn signals work normally? if so the wiring from the turn signal switch to the brake lights is GOOD. the stop light switch had\s a ORANGE wire that should have 12V if not ck STOP LPS fuse, when brake pedal is depressed, the WHITE wire is 12V (at the stop light switch) if that is OK, the turn signal switch COULD be bad. The wiring harness plug is near the back left under the tailgate, see if that is disconnected?

Aug 04, 2011 | 1999 Chevrolet K2500

2 Answers

Wich fuse is the one for the tag lights in a 1998 ford expedition


The tag lights run off the same circuit as the tail lights, if you have tail lights, and the only light out is the tag light, it's the bulb.
If no tail lights also, check the fuse for the tail lights.

May 08, 2010 | 1998 Ford Expedition

1 Answer

Where is the fuse for the right side tail light?


hi if it is only the one bulb not working/tail light and the front light on same side is working along with number plate and other tail lights may i suggest you replace/check the bulb on defective light as if fuse had blown ? the front light on same side would not be working if you put ignition on and press brake your brake light shoul work ? if so change the bulb as the bulb has two elements inside tail light and a higher wattage element for brake light

Feb 25, 2010 | 2004 Honda Accord

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

1 Answer

Tail Light doesn't work after replacing bulbs


Hi

Sounds like you have blown a fuse.

Check through the fuses with a test light.

Good Luck !

John.

P.S. Don´t forget to give me a rating please !

Jan 21, 2009 | 2006 Scion xB

Not finding what you are looking for?
2004 GMC Sierra Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...