Question about 1999 Toyota Corolla

1 Answer

Car engine seems to sound like it is not in gear when I step hard on the gas pedal.

Posted by on

  • Richard Scordino May 11, 2010

    Sounds like your transmission has gone away...have a good shop take a look at it

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 188 Answers

Your clutch is gone you need a new 1, there very cheay do get done

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get my car into gear.


Sometimes the rod on the slave cylinder by the transmission is adjustable, and you can get more travel. Have somebody pump the clutch pedal while you watch the slave cylinder rod moving.

Jan 28, 2015 | Cars & Trucks

1 Answer

Engine revs but no acceleration


Clutch plate and pressure plate seem to be too weak to pull the car. Or one of the CV joints is detached from the gear box. To test the clutch plate, park the car on flat surface. Pull the hand brake up, start the car, depress the foot brake pedal, depress the clutch pedal, put the car in 1st gear, press the gas pedal and leave the clutch pedal at once, while keeping the brake pedal depressed.
Follow one of the two following statements:
1. Engine does not shut down and remain start. (Clutch plate, pressure plate and clutch bearing defective - Replace all as a set)
2. Engine shuts down. (Clutch system is OK and does not require any repair).

May 22, 2013 | Honda Civic Cars & Trucks

1 Answer

Car will not accelerate when gas pushed


Clutch plate and pressure plate seem to be too weak to pull the car. To test the clutch plate, park the car on flat surface. Pull the hand brake up, start the car, depress the foot brake pedal, depress the clutch pedal, put the car in 1st gear, press the gas pedal and leave the clutch pedal at once, while keeping the brake pedal depressed.
Follow one of the two following statements:
1. Engine does not shut down and remain start. (Clutch plate, pressure plate and clutch bearing defective - Replace all as a set)
2. Engine shuts down. (Clutch system is OK and does not require any repair).

May 22, 2013 | Honda Civic Cars & Trucks

1 Answer

No speed when gas pedal is to floor tranny light came on


With the oil light coming on and the brake pedal being hard to press I would say that the engine stopped hence no vacuum -no power assist from the booster.- hard brake pedal. The lock uo feeling may come from the engine seizing up while you were still in gear

Feb 02, 2013 | 2003 Jeep Liberty

1 Answer

Why can't I press down on my gas pedal?


yea check sensors and throttle body make sure nothen hitten and linkage free and clear hope helps

Oct 13, 2012 | 2005 Dodge Grand Caravan

1 Answer

The clutch pedal seems to be very flopy and is not going into gear easily


Can be broken spring on the cluch pedal in side the car, that hold the pedal all the way back for full amount of brake fluid to the slave cylender, can be checked by pulling the pedal all the way up before steping it to the floor and putting in to gear or just look up under the daschbord on the pedal. Can allso be to little brake fluid in container. To check the master cylender rubber, step on the pedal putt in gear with engine running and wait with pedal all the way to the floor, if the rubber is gone the car wil start to go after some time (1/2-1 min or less) To check the slave cylender rubber will be dune the same way and working same way but it will be leaking out and on the floor.

Jun 18, 2012 | 1999 SsangYong Korando

Not finding what you are looking for?
1999 Toyota Corolla Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...