Question about 1995 Dodge Caravan
There is no adjustments for cv shafts,
If your getting a clicking sound while making a sharp turn and under acceleration you will need to replace that cv shaft.Another problem chry vans have is the front center mount going bad,it lets the enging rock under acceleration causing loping feeling
Posted on Nov 19, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: slight lopihg when taking off
If you mean that the vehicle shakes under acceleration as if the whole drivetrain is rocking back and forth then you may be on spot with the axle shaft causing the issue. When an inner cv axle joint becomes damaged it can cause this. I am afraid there is no adjustment for the shaft/joint. It must be replaced. Be sure to inspect engine and transmission mounts as they are a common cause of the axle shaft failure. When the mounts wear or the rubber breaks/disintegrates it allows one side of the engine to sag causing the inner joint to bind and break internally. I have found that most often it is the transmission mount that causes the problem, but have seen engine mounts do it too.
Posted on Nov 18, 2009
Tips for a great answer:
Jan 12, 2015 | 2000 Mercury Sable
Dec 22, 2010 | 1996 Toyota Camry
Aug 24, 2010 | 2006 Chevrolet Silverado 1500 2WD
Jan 21, 2010 | 2003 Dodge Intrepid
Nov 18, 2009 | 2005 Dodge Caravan
Oct 03, 2009 | 1998 Chevrolet Tracker
Jan 19, 2009 | 2002 Chevrolet TrailBlazer
Dec 22, 2008 | Dodge Ram 1500 Cars & Trucks
Nov 28, 2008 | 2004 Toyota ECHO
Aug 02, 2014 | 1995 Dodge Caravan
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: