Question about 2005 Hyundai Elantra

1 Answer

The central locking of my Hyundai do not lock or unlock the passenger side front door. What could be the problem?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 166 Answers

Might be the motor, that needs to be checked, it could be the cables giving power to that motor or could be the unit responsable of sending power, get a electrical diagram for the sistem and check every step for the voltages expected.
hope this helps

Posted on Nov 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My right side passenger door does not lock automatically anymore. Is there a fuse that operates this.


no all is related to one fuse you can remove the door internal controls and decore and remove center lock motor plug and test two connectors with multimeter with set on 12v and then lock un lock door and check the reading of the multimeter if it read signal then all plugs and wires from central lock control unit to the door central lock unit is okay it this cae you have to replace the door central lock unit with the same if no signal is readed while you lock unlock the door then you have to check central control unit and all wire plus out of it to the door plug

2- you can remove central control unit from driver door and test it in passenger door (usually the same unit ) if it works with lock unlock its then the replaced unit is faulty and needs to be replaced if it not work then check plugs wires from central lock unit (usually found inside driver door ) to the central lock unit in passenger door

3- check signal for said door fro the output of central door unit if no signal then it mean that faulty central lock control unit

Feb 23, 2015 | 2005 Honda Accord

1 Answer

Central locking problem


Change/repair the central locking motor inside the door.

Apr 01, 2014 | 2006 Hyundai Atos 1.1

1 Answer

Land rover discovery central locking.


No, likely to be caused by the actuators in the lock mechanism failing usually causing the door to remain locked. The boor door can also fail this way, as do the front side doors. Replacement requires the whole lock unit to be replaced at a cost of roughly £60 a lock, and a hours work. Helps if you have small hands. Requires a full strip down of the door and you will need the lock unit, trim clips (a few quid) and a trim removal tool (tenner). You can bodge with a flat head screwdriver, but the tool does help prevent damage to the clips & trim panel.

Dec 19, 2009 | 2003 Land Rover Discovery

1 Answer

Front passenger door will not open 1998 Tercel


If the passenger door has not been opened for some weeks or months, or in icy weather, it is possible that the rubber seals around the door frame will cause the door to appear 'stuck' fast - in this case, a bit of extra force from inside the car whilst pulling on the interior door handle should cause the door to open. Failing that, if the car has electrically operated central locking, when the key fob is pressed to deactivate the central locking does the door lock on the passenger side work as expected? Try unlocking the passenger door with a key, and or pull the door lock button upwards to ensure that the lock has been deactivated. Check for blown fuses.

Oct 06, 2009 | 1998 Toyota Tercel

1 Answer

Central Locking comes in and out.


Electrical problem. Have it checked from the fuse area right to the doors.

Sep 03, 2009 | 1991 BMW 5 Series

1 Answer

Hyundai Excel 1997 driver's door lock won't unlock


the little metal rod that goes from the key part of the door lock to the electrical switch has come off ,no doubt the plastic clip that holds it has broken

Jun 21, 2009 | 2002 Hyundai Accent

1 Answer

Central locking wont stay open


Here's what I suspect is happening. The door locks will lock and unlock normally when the key is OUT of the ignition. If the key is IN the ignition, the doors cannot be locked (manually, key fob, or otherwise, if the system is operating as designed - prevents the doors being locked when the key is in the ignition). I've seen this problem before, but on a Santa Fe, not an Accent. The ground signal of the right hand front passenger door was lost, and the doors automatically locked. Perhaps something similar is happening in the circuit between the ETACS module and the right front passenger door lock/unlock actuator. Could be anywhere in the circuit.



d05b136.gif
ab4c712.gif These wiring diagrams may be helpful. The relays expecially may help solve this issue. As you can see, these relays are also controled by the ETACS module (Remote Keyless Entry).

67dc553.gif

Mar 31, 2009 | 2003 Hyundai Accent

1 Answer

Central locking


Resolving this problem will require removing the door panel in question, and checking for voltage at the solenoid when the unlock button is pressed.
If there is 12V at the positive wire to the solenoid, but the door does not attempt to unlock, you must replace the solenoid.
Doors are not fused individually, so the fact the other doors are operating properly rules out fuses.
Remove the door panel, and check for voltage - if there is no voltage, the wiring is suspect. This would require more in-depth troubleshooting - checking wires for continuity to ground, and overall continuity.
Start with the door. Re-post your findings and I can help you additionally.

Thanks for using FixYa - Your FiXyA rating is appreciated!!

Jan 22, 2009 | 2006 Hyundai Sonata

1 Answer

Jeep grand cherokee central locking system


If all the doors do not lock or unlock when using the passenger side switch, then the switch itself is probably bad.   If the passenger side switch locks or unlocks all the other doors except for its own, then the power lock solenoid inside the door is bad or jammed.  If it is jammed, try locking and unlocking the door manually while activating the switch to work its way free.

Dec 13, 2008 | 1996 Jeep Grand Cherokee

1 Answer

Central locking


I have same problem
Found parts of a corroded spring in door mechanism
New spring solved the problem

Nov 11, 2008 | 1996 Hyundai Sonata

Not finding what you are looking for?
2005 Hyundai Elantra Logo

Related Topics:

497 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...