Question about 2004 Mitsubishi Diamante

1 Answer

Mitsi 2004 wont start

I purchased this wreck minus wheels, seats, stereo, dereg & ignition switch (smashed). A srewdriver seems to work fine in what is left of ignition & other wiring seems intact. With screwdriver I get acc (dashlights etc) then motor turns over & over but does not fire. Do these cars have anti theft devices that obviously didnt work before but work now or wot. I,ve been over the obvious & am a little confused so any advise would be greatly appreciated.
Cheerz Greg.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 560 Answers

Yep, the keys will have what is known as a transponder inside, this transponder sends a signal to a transponder reciever in the column. When the signal matches it allows the car to start.
The system is intergrated into the ECU and cannot be removed, you need the original key to start the car.

Posted on Nov 18, 2009

Testimonial: "Thanks for your fast & informative reply. Much appreciated."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 ford explorer and it keeps blowing ignition fuse cant seem to find out why. could someone help me please


An IGNITION coil failure is the most probable cause for a 30 amp fuse (F2-116, CJB) to repeatedly operate... If my drawings are correct you have a coil to check on EACH plug.

"COP" (coil on plug)... ignition system...
A simple resistance check to ground ought to reveal the failing COIL.
(
using a multi-meter as illustrated below... "Ohm" setting).

Central Junction Box:
Wiper F2 48 CJB ... 10 amp... has no relation to your
30 amp CJB ignition system fuse.

Check the physical connections at the bottom of your steering column... and make sure your battery connections are clean and tight...

Failing any of that you probably have a bad ignition switch as well

Jan 14, 2016 | 2004 Ford Explorer

1 Answer

Key wont go all the way in my ignition i have a 98 suzuki sidekick


even wiggling the steering wheel?
seems there is a key broken off inside.
not good that.. i can advise the steps. to replace the switch.
do you use huge loaded key rings (dont) that will wreck the lock fast.

Mar 31, 2013 | Cars & Trucks

1 Answer

My right mirror won,t keep memory whenever i set it same with my seat position


Position items,press set ,then #1 or #2

No owners manual ?

Helm.com --- to buy one

For mirrors you need to move the switch to the side you want

Jul 09, 2012 | 2004 Lincoln Aviator

1 Answer

Where are the fuses for blinkers


Under the dash just left of the steering wheel. fixurupr_7.jpg
Cavity Fuse Color Description F1 -- -- Spare F2 -- -- Spare F3 10 Amp Red Headlight high beam left F4 15 Amp Lt. Blue Flasher, hazard switch (see Junction Block diagram above for location of turn signal Flasher relay - Mopar p/n 4686094) (Repair tip: WJ flasher repair)
F5 25 Amp Natural Radio amplifier F6 15 Amp Lt. Blue Park lamps F7 10 Amp Red Interior lights F8 15 Amp Lt. Blue Overhead console, rear wiper, IP lights, rear flipper glass solenoid, power locks F9 20 Amp Yellow Power outlets F10 20 Amp Yellow Adjustable pedals (2002-2004 only) F11 10 Amp Red Rear window defrost indicator F12 10 Amp Red Auto shutdown relay / "Fuel" F13 -- -- Spare F14 10 Amp Red Headlight low, left F15 10 Amp Red Headlight low, right F16 10 Amp Red Headlight high, right F17 10 Amp Red Instrument cluster, diagnostic connector F18 30 Amp ? Trailer tow F19 10 Amp Red Anti-lock brakes F20 10 Amp Red Ignition Run / Heated seats / A/C Heater control / Flasher - Left and Right turn signal switch sense F21 10 Amp Red Ignition Run / Start - PDC (Power Distribution Center) F22 10 Amp Red Ignition Run / Start F23 15 Amp Lt. Blue Brake switch F24 15 Amp Lt. Blue Foglamps F25 20 Amp Yellow Accessory delay relay (sunroof) F26 15 Amp Lt. Blue Cigar F27 15 Amp Lt. Blue Rear fog (export) F28 10 Amp Red Body Control Module, Acc/Run F29 10 Amp Red Rear wiper switch. Washer motors F30 15 Amp Lt. Blue Radio F31 10 Amp Red Ignition Start F32 10 Amp Red Ignition Run / Start - Airbag F33 10 Amp Red Ignition Run / Only - Airbag C1 20 Amp Yellow Wiper (Circuit Breaker) C2 20 Amp Yellow Seats (Circuit Breaker) C3 -- -- Spare
fixurupr_6.jpg
I hope this helps :)

May 16, 2011 | 2004 Jeep Grand Cherokee

1 Answer

2004 Volvo xc-70 (Automatic trasmission in Park position) Ignition key inserts, lights the dash and unlocks the steering wheel but wont go past position II or III to start. Changed keys and managed to push...


Purchase an after-market switch set from an auto parts dealer like NAPA or Parts plus, any one of them would get you a switch set a lot cheaper than OEM. Before I'd pay $300 for a tumbler barrel I personally would remove the switch and use a screwdriver to start my car. I've done that also.

Jul 20, 2017 | 2004 Volvo XC70

3 Answers

HOLDEN RODEO WONT ENGAGE 4WD


If for any reason your Rodeo is or seems to be "stuck" in 2WD or 4WD then below is instructions to reset the system

1. Ignition off, hold all 3 buttons (2H, 4H & 4L) in together.

2. Switch ignition on to the "reds" position (last position before actual engine ignition).

3. Hold in this position for 30 seconds.

Oct 18, 2009 | 2004 Isuzu Rodeo

1 Answer

2003 TT Air Bag & Seat Belt warning lights not eluminating


It is fairly complicated to remove the instrument panel to replace the light bulb. It requires you to remove the steering wheel and airbag module and several other components.

The sound you hear may be the coolant pump for the turbo.

Sep 10, 2009 | 2000 Audi TT

1 Answer

2001 eclipse spyder gt radio works but only tweeters come on.If you turn it off and on quickly the door speakers will come on but only the left plays properly.The back speakers wont play at all.All this...


The main amp box is under the passenger seat so it might have gotten wet.
try drying amp.
disconnect battery for about an hour
(before you disconnect the battery make sure you have the lock code to your stereo some need.
re connect battery and stereo sould play fine
if not then you may have a bad amp or speakers

Jun 21, 2009 | 2001 Ford Focus

1 Answer

New starter but car wont start


funny...you have just told me what is wrong with it!!!
check power in, power out at the ignition switch...likely it has failed. switch is on the top of the steering column under the dash and is sometimes easier to reach if you disconnect the column from the dash and permit the sterering wheel to rest on the seat.

Apr 16, 2009 | 2004 Oldsmobile Alero

Not finding what you are looking for?
2004 Mitsubishi Diamante Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...