Question about 1987 Toyota Pickup

1 Answer

Have to prime carburetor to start truck.

Have to prime carburetor (pour gas diectly in carb) to start truck. Runs great. Ordered rebuild kit but no instructions w/kit?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 400 Answers

It is a good idea to replace the kit, and it is a matter of stripping the carb and taking note what you removed where and replacing with a new part. You should also check the spark plugs and timing. If the timing is out, the engine will also have difficulty starting.

Posted on Nov 18, 2009

  • larry_42 Jan 18, 2014

    WOULD CHECK THE FUEL PUMP, IF IT'S NOT A ELECTRIC ONE IT MAY BE LETTING THE GAS FLOW BACK INTO THE TAKE, TAKE A PRESSURE READING

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to prime carburetor on 1988 Toyota tercel 1bbl


Normally, you wouldn't need to do this to get the engine started. If you have a mechanical fuel pump ion the engine, just cranking the engine over should cause the pump to push gas into the carburetor. And if an electric pump, it should come on with the key in on.

But to prime, pour a small amount of gas down the throat of the carb, and crank. As the engine fires and runs, the pump should begin working and pushing fuel into the carb.

Dec 25, 2014 | Cars & Trucks

1 Answer

1986 dodge truck, engine runs rich


It could be a bad accelerator pump inside the carburetor. The carb would need a rebuild kit.

Nov 26, 2013 | Cars & Trucks

1 Answer

88 Suzuki Samurai idles fine but wont take gas?


check the carb main jets i just had that problem rebuilt the carb and fixed it. auto zone has rebuild kit for around 30 dollars easy to rebuild if you take a lot of pictures!! spray all the jets out with carb cleaner around 4 dollars

Dec 29, 2012 | 1988 Suzuki Samurai

1 Answer

1994 Isuzu Pickup 2.3L carbureted motor with mechanical fuel pump lost prime


If it were just that you would be ok once the engine started.
You might have a float problem with the carb. or something in the tank.
Are you sure the pump is not pumping ?

Jun 28, 2012 | Isuzu Pickup Cars & Trucks

1 Answer

Hi there ! I have a toyota 87model 1.6 with a carburetor problem . It does not start in the morning but i spray in some quickstart then it starts . Then its everytime after that when the engine has run .


There are a couple of things. First gaskets/rebuild the carb. Gas will drain out of the carb from bad gaskets. Your car is old... Second float sticking. Not letting enough gas in. Your car is old, this should also be a rebuild and fuel filter change on both. You can get the kit at a parts store or a carb rebuild store. not that hard to do. comes with instructions. Since and if your car runs fine after the initial start up (quick start). I wouldn't worry about cleaning the jets and ports so much.

Jul 02, 2011 | 1987 Toyota Corolla 2 Door

2 Answers

I have a 1989 RAM w100 with a stock 318. I'm


If you can spray carb cleaner in the carb then you have either a fuel supply problem or fuel delivery problem. Check your fuel pressure and make sure it is in spec. Then check the spray in the carb spray.

May 27, 2011 | 1989 Dodge W150

1 Answer

My carb on my toy 86 pickup is not getting gas when I press on the pedal. the acceleartion pump seems to be pumping OK, but no gas is coming thru the line that squirts into the carberator chamber. I can...


something is clogged. Recommend rebuilding the carb. The rebuild kits usually come with instructions--enough to get you thru if you are handy. Or, you could just take the cover off the float bowl right there on the engine and see if you can find the clog. Especially check the jet(s) in the bottom of the bowl. Any more questions--let us know.

Oct 04, 2010 | 1986 Toyota Pickup 4WD

2 Answers

I have a 1991 GEO Tracker that's not getting gas in the carb...the gas is up to the carb but is not going in to the carb.


Disconnect the carburetor from the gas line, and rebuild it, blowing out the jets with compressed air, and adjusting the float so that it will allow gas to flow into the carburetor bowl.

Aug 03, 2010 | Cars & Trucks

1 Answer

Carb gas pouring out of hole on top front of carb


Sounds like the float has absorbed gasoline and can't ftoat anymore. This causes the fuel to not be shut off when float bowl is full causing the carb to flood. You will have to buy a carb kit and a float and rebuild the carb. Hope this helps.

Feb 15, 2009 | 1966 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

479 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...