Question about 1998 Dodge Caravan

1 Answer

Is there a way to get the power door locks to quit locking automaticlly every 32 secs when van is off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,985 Answers

Yes, you need to take it to a chry dealer and have them connect their computer and dis enable them by computer

Posted on Nov 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Doors wont lock automaticlly when driving off anymore


check door sensor and if it vacuum type they can be also replace if needed

Jan 16, 2014 | 2006 Ford Freestyle Limited

1 Answer

Both Power Locks Lock But Wont Unlock. Remote will unlock the doors


If the remote key fob locks and unlocks the doors then the problem is more than likely the power lock switches, this is a common problem on the Venture Van.

Mar 02, 2013 | 2001 Chevrolet Venture

1 Answer

The Remote quit working, even w/ new batteries, for the power locks on our 2000 chev. Venture !!! The door lock & unlock switches in the van works fine!!! Where do i start!!!


Chances are you have a bad solder joint on the little board. If youre handy you can fix it but if not then it needs to be replaced.

Feb 23, 2013 | Cars & Trucks

1 Answer

Which fuse is the one for the door locks


The 2005 Dodge Caravans have software problem in the BCM that causes the power locks to quit working. The only fix is to bring the van to a dealer for a software flash update.Read more: http://wiki.answers.com/Q/Where_is_the_fuse_located_for_power_door_locks_on_a_2005_Dodge_Grand_Caravan #ixzz271oz6ROB


disconnect the battery cable and pull the BCM fuse and do system reset and the door locks may work fine again.



also ro try to get the power door locks working. pull and reinstall (but not replace) all fuses and fuse blocks (but not the relays). The locks may start working after that.
Read more: http://wiki.answers.com/Q/Where_is_the_fuse_located_for_power_door_locks_on_a_2005_Dodge_Grand_Caravan#ixzz271pG2x7l

disconnecting and reconnecting the lamp and horn relays may fix same issue with the locks.
Several people suggested resetting the fuses under the hood, and it worked. Others tried unplugging and plugging back in the battery and that also worked for them.
Read more: http://wiki.answers.com/Q/Where_is_the_fuse_located_for_power_door_locks_on_a_2005_Dodge_Grand_Caravan#ixzz271pmOoHv

Sep 20, 2012 | 2005 Dodge Caravan

1 Answer

2001 Mercury Villager keyless remote is malfunctioning


Keyless Entry
The keyless entry system consists of the following:
  • smart entry control(SEC)/timer module
  • keyless entry remote transmitters
  • power door lock actuators
  • body side door power door lock actuator
  • liftgate actuator
  • power door lock switches
  • door ajar switches
  • Principles of Operation
    All doors can be locked at once by turning the door key lock switch to the locked position. An individual door can be unlocked by moving the door key lock switch to the unlocked position and turning it again within five seconds; all the doors (including the liftgate) will unlock.
    The smart lock system is designed to keep the driver from locking his keys in the car. It will lock and then unlock all the doors if the smart entry control(SEC)/timer module detects the following conditions:
    • The ignition key still in the ignition.
    • A front door is open.
    • A door lock switch has been pushed to the lock position.
    The panic feature has a duration of 30 seconds from the last time the PANIC button is pressed. When locking the doors from the remote transmitter, the horn chirp/lamp flash feature can be disabled or enabled by holding the LOCK and UNLOCK buttons for two seconds. The hazards will flash three times to confirm that the feature has be enabled or disabled.
The control module probably see's an input that shouldn't be there . lock Switch , door ajar etc... Don't think it has anything to do with the remote . Some part stores have a tester to see if signal from the remote is working . Or the dealer ! Take it an see if your remote is sending a signal without you pressing any buttons .
If it is you need a new one .

May 19, 2017 | Cars & Trucks

1 Answer

Can I deactivate the door locks so they will not automaticlly lock when I start it


In the owners manual it says you can change the time/speed they lock, but it says nothing about any way to disable them, it is a safety issue. I also checked the factory repair manual, nothing there either, sorry but they are there to stay, if you pull the fuse no power locks will work

Dec 03, 2010 | 1994 Chevrolet Suburban

2 Answers

HOW TO PROGRAM 2003 TOYOTA CAMRY FACTORY REMOTES


1. Driver door open and unlocked. Key out of the ignition
2. Insert the key and remove 2 times in 5 sec.
3. Close and open driver door 2 times in 40 sec.
4. Insert the key and remove it again from ignition.
5. Close and open driver door 2 times in 40 sec.
6. Insert the key in ignition,
7. Close the door,
8. Turn to on and back to lock in 1 second intervals. 1 time for add, 2 times for rewrite, 3 for confirmation 5 for prohibition. (yes, there is no “4”)
9. Remove the key
10. Power lock will cycle to confirm
11. For add or rewrite mode within 40 sec of the confirmation,
A. press “lock” and “unlock” buttons of the FOB at the same time between 1 and 1.5 seconds.
B. within 3 sec press “Lock” button for more than 1 sec and release.
C. If it’s correct, the power door lock will cycle once. If it’s wrong the door lock will cycle twice.

Sep 17, 2009 | 2003 Toyota Camry

2 Answers

Power door locks will not lock


check master door switch/grounds and out put power= if all ok then look at GEM module.

Jun 17, 2008 | 2005 Ford F-150

Not finding what you are looking for?
1998 Dodge Caravan Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...