Question about 1997 Pontiac Bonneville

2 Answers

I need a serpentine belt diagram for a 1997 pontiac bonneville se 3.8L - no turbo

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

I need a serpentine belt diagram for a 1997 - 0900c152800b19a9.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 8: You can use a box-end wrench on the pI need a serpentine belt diagram for a 1997 - 0900c152800b19aa.jpgthe tensioner ...


0900c152800b19aa.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 9: ... then remove the belt from the pulleys


0900c152800b19ab.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 10: Serpentine drive belt routing and removal - 3.8L (VIN L) engine shown, VIN C similar


0900c152800b19ac.jpgenlarge_icon.gifenlarge_tooltip.gif


0900c152800b19ad.jpg enlarge_tooltip.gif Fig. Fig. 12: Drive belt removal on a 1992-95 supercharged engine
To install:
Be sure the belt is alignI need a serpentine belt diagram for a 1997 - enlarge_icon.gifer grooves of the accessory drive pulleys. I need a serpentine belt diagram for a 1997 - enlarge_tooltip.gif class="h_mi">Lift the tensioner, and install the belt onto pulleys. Make sure the belt is routed properly.


0900c152800b19ae.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Fig. 13: Many vehicles have a label you can check to be sure the belt is installed and routed correctly

  1. For 1996-99 vehicles, raise and safely support the vehicle. Install the engine mounting bracket lower spacer, stud and nut.
  2. For 1996-99 supercharged engines, perform the following:
    1. Attach the connector to the crank sensor.
    2. Install the right-hand splash shield, then carefully lower the vehicle.

  3. Install the belt guard or reservoir.
  4. Connect the negative battery cable.

Posted on Nov 18, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

There is one on the hood or on the frame on the car.

Posted on Nov 18, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

blueextc3221
  • 15935 Answers

SOURCE: serpentine belt

it is on a sticker adhered to your radiator shroud.
if it is removed, damaged, or unclear...

9103dff.gif
one tip - if you look by the crankshaft pulley to the right you will see a tubular looking shaft about 1" diameter , you will notice you can't get the belt out from under this piece , it has a nut on it , once you take the nut off , you will notice it has a star shaped point on the tip of the stud , it requires a reverse torx socket or wrench to remove the stud , when you get the stud out the tube piece it can be removed , then the belt comes off , replace the belt , now comes the tricky part , fitting that tube spacer back into its spot , it can be difficult , once its in place put the stud back in , and put the nut on and tighten it.

Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FREE question.

Posted on Mar 19, 2009

ginko
  • 19396 Answers

SOURCE: 1997 pontiac bonneville se

There is a tensioner pulley attached to an arm.
Release the tension on the belt by undoing the pulley arm bolt, the belt will have enough slack to slide off the pulleys.
To put it back on, you find the diagram on the radiator guard or under the hood.

Posted on Sep 01, 2008

MrScary66613
  • 1990 Answers

SOURCE: serpentine belt for 1997 pontiac bonneville sse w/ supercharger

http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=PONTIAC&model=BONNEVILLE&year=1997&year_from=&year_to=&engine=All&l=n

This should help. Please Rate My Response! Thanks!

Posted on Feb 04, 2009

motor1258
  • 6674 Answers

SOURCE: need diagram how to install serpitine belt on 1997 pontiac bonneville se 3800

8th digit of your vin# needed. Is it an "L", "C" or "K" ?

Posted on May 26, 2009

Mr BrokRench
  • 1623 Answers

SOURCE: need diagram how to install serpetine belt for my 1997 pontiac

What engine do you have in the bonnie? Supercharged or non? Belt routings are different...if you have an owners manual it will be in there.

Posted on May 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 pontiac bonneville se


There is a tensioner pulley attached to an arm.
Release the tension on the belt by undoing the pulley arm bolt, the belt will have enough slack to slide off the pulleys.
To put it back on, you find the diagram on the radiator guard or under the hood.

Sep 01, 2008 | 1997 Pontiac Bonneville

1 Answer

I need a serpentine belt diagram for my 1997 Pontiac Trans Sport 3.4


Here are 2 diagrams (1 with 1 w/o AC). Best of luck.
Greg
a114a01.gif
331366e.gif

Aug 10, 2009 | 1997 Pontiac Bonneville

1 Answer

I need a serpentine belt diagram for my 1997 Bonneville 3.8 SE


There should be a diagram under the hood,If not e mail me an I will send you one wilsodfarm@yahoo.com

Jul 28, 2009 | 1997 Pontiac Bonneville

2 Answers

Need diagram how to install serpetine belt for my 1997 pontiac


CLICK HERE - as you did not indicate the accessories installed.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 27, 2009 | 1997 Pontiac Bonneville

2 Answers

Need to replace serpentine belt for 1998 bonneville se


Use a break over to unload spring tensioner and pull old belt off. Look at belt diagram and reinstall new belt pull back tensioner and install.

Dec 23, 2008 | 1999 Pontiac Grand Am GT

2 Answers

Serpentine belt diagram


The belt installation diagram is under the hood, look on the shock tower or over the radiator next to the Federal emissions certification sticker.

Sep 01, 2008 | 1997 Pontiac Bonneville

Not finding what you are looking for?
1997 Pontiac Bonneville Logo

708 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...