Question about 1993 Jeep Wrangler

1 Answer

I have a 93 jeep wrangler 4.0L and after driving for awhile when i put the clutch in to break or slow down, the rpms sometimes drop strait to zero and the motor turns off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 962 Answers

You probably ned a new clutch. A good way to check if the clutch is bad. Place the car bumper against something solid and then put the car in gear and if the motor shuts off, then you don't need a clutch. if it does not turn off immedietly, you need a new clutch.

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1997 jeep wrangler goes in to gear but doesn't drive


Need to have trans rebuilt or find another in junk yard and replace

Jul 09, 2012 | Jeep TJ Cars & Trucks

1 Answer

My 2000 jeep wrangler is an automatic, in the morning I put it in reverse and when i put my foot on the break , it still trys to go. Also does it at redlights , i will be in drive and have my foot on the...


The gear are failing,you have a internal failure,dealing with the clutch pack,remeber not to drive too far away from home,you will just get towed.shop around for a transmission you are going to need one

Mar 26, 2012 | 2000 Jeep Wrangler

1 Answer

2001 montana won,t runs about 2800rpms @70 don,t seen to be going into overdrive on adown hill slope when in overdrive with the shifter it drops the rpms down to 700rpms , and when you put the shifter into...


I think I understand the question. These transmissions are known for the 4th speed shaft shearing off the splines. 4th being overdrive. This won't let it shift into overdrive and also no engine breaking when you are coasting. In other words, when you are coasting your engine rpms will drop down to idle speed. So when in 3rd or drive manual, you do have engine breaking and the rpms fall slowly. The transmission is gonna have to come out to be repaired. I hope this helps.

Apr 01, 2011 | 2001 Pontiac Montana

1 Answer

I own a 03 jeep wrangler TJ 4.0. At high rpms or under load (going up hills it looses power) if driving in 5th gear at 60 mph and is down shifted to 3rd gear it slows down extreamly, the engine will not go...


u only did part of the job most people change the air intake first put in a cool box or k&n type which causes some of same problems as opening the exhaust-- ur letting to much air out no back pressure and not enough air going in causing an imbalance also ur going to have problems with o2 sensors/cat sensors also mass air flow down the line

May 06, 2010 | 2003 Jeep Wrangler

1 Answer

How do I change out the clutch in my 1995 Jeep Wranger 4x4?


support the engine, drop the drive lines, pull trans and tranfer case, un bolt clutch, have fly wheel turned and put back together

Oct 01, 2009 | 1995 Jeep Wrangler

2 Answers

Jeep wrangler bucking


how long has this been happing..one tank of fuel or more, could have been bad gas, replace filter,, put gas dryier in fuel tank..if it continues could possibly be transmission related..the reving down doesn't sound like transmission though if tansmission was slipping it would rev up..good luck

Jun 02, 2009 | 1997 Jeep Wrangler

1 Answer

Will idle high sometimes up to 3000 rpms when driving or sitting still


I have the same Jeep and same problem. The engine was running rough. The Jeep dealer fixed a vacum problem in the manifold and they then decarbonized and cleaned the fuel injectors. After these repairs the idle problem began, it would spike to 2000 rpm while sitting at idle, sometimes it would slowly come down, sometimes I would have to tap the accelerator. I took it back in and they then replaced the throttle motor and reprogrammed the PCM (Power Control Module?) Still same problem. Now they suspect a another vacuum leak and I am taking it back in on Tuesday, will let you know what happens, $ 1,300 so far.

Jun 02, 2009 | 1999 Jeep Wrangler

1 Answer

Push down on clutch pedal can't get car into gear


Likely, you have a hydraulic clutch system. Check clutch master cylijnder for fluid and leakage, check hydraulic line and slave cylinder for leaks. If fluid low or empty, bleed as you would a brake wheel cylinder. If full,have someone work the clutch while you watch slave cylinder to make sure it is moving clutch fork. If system full and little or no movement, the master may be "bypassing" internally (replace) Also, check pedal mechanical linkage. Not often but sometimes these parts can break! Could also be athat clutch itself is worn, but this does not happen overnight and you would have noted slip long before this!

Dec 29, 2008 | 1993 Jeep Wrangler

2 Answers

2004 jeep wrangler 2.4 litre 4 cylinder


check the ground wirea at the dipstick tube,remove them all,and bend the ends of the wire,look for weak or broken wires, i bought several 4 cyl jeep that had problems at shift, fall on their face < after the engine settled back in to place,so wires made contact> just a thot. the ground wires are small the engine moves,when shifting.

Jul 29, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
1993 Jeep Wrangler Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...