Question about 1993 Geo Prizm

2 Answers

On my 1993 Geo Prizm i need to know were the intake temperature sensor is because i need to install a performance chip. Thanx

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,615 Answers

Just be aware that if you dont pass smog next time it could be because you toasted the catalytic conveter by doing this. Also the cat could fall aprt and cause drivability issues. All you installing is a resister that tells the computer that your running colder. It will give you less gas milage. More carbon buildup and stress the transmission even more. If your aware if this all then the sensor is on the air box or boot leading to the throttle body. If you have a MAF sensor then this will have severl wires on it and you will have to figure out which one to do. I'm a smog tech. I legally cant tell you.

Posted on Nov 18, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 226 Answers

On the air inlet pipe from the airbox to the throttle body. But, don't believe those IAT performance chips, they are waste of money.

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does a 1993 geo prizm 1.8L lsi have two temp sensors?


buy the manual. and RTM,
and yes, Air , water, and on a stock car up to 3 coolant sensors.
The ECT runs the ECU. tells ECU coolant temp.
my guess is the coolant gage is dead? RTM
on most 93 car, the Guage has its own sensor, (isolated)

89-02
joint venture, GM/toyota with 3 engine used.
1.8L or 1.6L
toy engine, 4aFE, 7AFE or 4AG
open hood look
or use the GM RPO tag
or Use the VIN to find motor used.
for docs?
ebay
search
Geo Prizm factory service manual, Duh?

http://www.ebay.com/sch/i.html;jsessionid=D19D723C2EDB4A9FE12E7C01C0677129?_sacat=0&_nkw=geo+prizm+shop+manual&_nkwusc=geo+prizm+shop+manaul&_rdc=1

Feb 18, 2013 | Geo Prizm Cars & Trucks

1 Answer

Where is the intake air sensor on a 97 geo prizm


Hi, the Intake Air Temperature sensor is on the air filter housing.

Mar 04, 2011 | 1997 Geo Prizm

1 Answer

What is needed to fix fault codes 14 and 24 for a 1994 toyota corolla


The following is from a Haynes manual for 1993-1996 toyota corolla and geo prism:

Code 14: ignition signal. No ignition signal to the ECM. Check igniter or circuit, ignition coil, ig. switch or circuit, ECM (engine control module or "computer")

Code 24: intake air temperature sensor. Open or short in the intake air temperature sensor circuit. Check intake air temp. sensor or wiring to ECM.

Jan 27, 2011 | 1994 Toyota Corolla

1 Answer

Is there a synthetic freon for a 1993 geo prism?


freon which is known as R-12 in the industry was replaced with R-134A which is the refrigerant used in your car.. There is a user available replacement which comes in a one pound can that can be installed, however you must have the system evacuated by a garage in order to install it..

Jun 07, 2010 | 1993 Geo Prizm

2 Answers

Boss performance chip installation


sometimes the air temp sensor is in the mass air too.

Jul 10, 2009 | 2005 Chevrolet Avalanche

1 Answer

I need change gaskets for a geo prizm 1.6 1993


if it was me i would go to your local library and get my hands on a Haynes auto repair manual for your car also try these website www.alldatadiy.com for repair information also try this one if they do you be able to checkout a price and get pictures and diagram as well its www.autozone.com hope this help you Michigan Man

May 24, 2009 | 1993 Geo Prizm

1 Answer

Geo prizm 95' engine light on - code 24 - air intake temp. sensor has no power


use an electrical tester with a sharp point tip, and poke through the coating into the wire at every 5".

this is the best wat to test the wiring.

Sep 04, 2008 | 1990 Geo Prizm

1 Answer

HELP!?


Hey .
you did all ready or need help.
Let me know.
I will stay on line a few hours.

Jul 25, 2008 | 1996 Geo Prizm

Not finding what you are looking for?
1993 Geo Prizm Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...