Question about 1993 Toyota 4Runner

1 Answer

I need instructions on how to replace a fuel pressure regulator and intake gasket manifold in a 1994 Toyota 4runner. Do you know where I can get that information?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 881 Answers

The pressure regulator should be fitted ot the fuel rail firewall end and the inlet manifold gasket on the inlet manifold when you take it off ,and the inlet manifold is the one which goes to the air filter pipe and airfilter box.

Posted on Nov 18, 2009

Testimonial: "Great helpful information and quick response."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1994 buick lesabre misses out


Check the fuel pressure. It will tell you if the pump, fuel filter, and fuel pressure regulator are all good. Fuel pressure is critical on fuel injected engines.

Check your spark plugs for wear or the wrong gap.

Another possibility is a vacuum or air leak. Check all vacuum hoses and the intake manifold gasket. The GM 3.8L engine is prone to lower intake manifold gasket failures. Sometimes the upper intake gasket, too.

Sep 09, 2014 | 1994 Buick LeSabre

1 Answer

Where is the 2002 corolla fuel pressure test port


LOOK ON THE FUEL INJECTORS RAIL YOU SHOULD SEE A BLACK CAP THAT LOOK LIKE A TIRE AIR PRESSURE STEM REMOVE THE CAP AND FUEL PRESSURE REGULATOR IS THERE

Sep 25, 2012 | 2002 Toyota Corolla

1 Answer

My 1994 buick cutlass cierra is smoking out the back, is missing, is going through tons of gas and smells like gas so bad it makes me sick. Never did this before I took it to a mechanic to have the...


fuel pressure regulator would be the first thing i check pull vacuum line off and if the line is wet with gas or squirts out of the regulator then it needs replaced. if you check fuel pressure the pressure should go up 10psi when you disconnect the vacuum hose to the regulator.( with the engine running)

May 17, 2012 | 1906 Buick G

1 Answer

1994 toyota camry le can only get it to run for a split second by using my hand on the intake to choke it manualy


Either there is insufficient fuel reaching the injectors, or there is a vacuum leak around the intake manifold.

Check the big flexible hose between the air cleaner and the throttle body for splits or cracks. If there are none, then suspect a failed fuel pump or fuel pressure regulator. You will need to check fuel pressure at the fuel rail, just after the fuel filter. You can get gauges for this

http://www.amazon.com/Actron-CP7803-Vacuum-Pressure-Tester/dp/B0006V2BS2/ref=sr_1_4?s=automotive&ie=UTF8&qid=1327480222&sr=1-4

Just seeing fuel is not enough, it has to be up to the specified pressure with EFI engines, 31-37 psi at idle. It should also maintain this pressure for a few minutes after stopping the engine.

Jan 22, 2012 | 1994 Toyota Camry

1 Answer

My 1994 toyota camry idles then dies out


I would inspect the large flexible hose, between the air cleaner box and the intake manifold, for a crack or hole.

Also possible is low fuel pressure or a faulty fuel pressure regulator. To check this you need a fuel pressure gauge connected at the fuel delivery rail.

Jan 15, 2012 | 1994 Toyota Camry

1 Answer

Runs poorly(very Rich, stumbles) when map sensor is plugged in, but runs smoother with it unplugged...new map sensor, EGR, TPS, O2, Fuel Pump, timing is right, good vacuum at map, no vacuum leaks,


If it is fuel injected you may have a bad fuel pressure regulator. The regulator is attached to intake manifold with a vacuum hose and the bladder sometimes fails causing gas to be dumped directly into the intake manifold. Only solution is to replace the fuel pressure regulator.

Dec 10, 2010 | 1994 Chevrolet Suburban

2 Answers

I have fuel in the oil


Sounds like a top end repair of seals or a piston ring issue, or the intake manifold gaskets are leaking. With the age of the vehicle you may be able to go with the intake gasket first but if its the heads then you have to do it twice, and if its the rings allowing blow by you would have to take the heads off anyway. Just be careful so you get it narrowed down quick and easy check compression to see about blowby and the head may help.

Apr 29, 2010 | 1994 GMC Jimmy

1 Answer

The motor stop when i give gaz


i take it you have a 22re engine you must replace the fuel filter in a precarious position under the intake manifold

Sep 13, 2009 | 1994 Toyota 4Runner

1 Answer

1986 toyota 4runner fuel delivery


check the fuel pressure regulator

Apr 15, 2009 | 1986 Toyota Pickup 4WD

1 Answer

Where is the fuel pressure regulator located at in a 94 bravada


My friend, I suggest you go by your local Auto Parts Store and purchase a Haynes Repair Manual on this vehicle. There are many sensors and electronic controls involved with this engine as I'm sure you already know. Any one of these can memic something that "it is not".
If your problem is the Pressure Regulator, it is located inside the "Tunnel Ram" intake manifold along with the multiport fuel injection system.
Now,,, before I went through the trouble and expense of going into the Intake Manifold, I would run the EMC in Diagnostic Mode and see if there are any codes present.

Jan 20, 2009 | 1992 Oldsmobile Bravada

Not finding what you are looking for?
1993 Toyota 4Runner Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...