Question about 1992 Dodge Ram 150 Club Cab

1 Answer

1992 Dodge Ram 150. 318ci 5.0L High Output Engine. Electronic Fuel Injection. Prior owner stated the truck was involved in collision to front driver side corner of vehicle. The truck didn't run when i got it, so we put in a new ECM (Electronic Control Module- located next to driver side headlight. Truck started up and ran fine. Got a new fender from a DOT Dodge. Painted over old paint. Now truck stalls out randomly and cranks but won't turn over. Only way of knowing vehicle will start is when key is the "ON" position, the "Check Engine" light will luminate. Other than that? Nothing. Any ideas? If you have further questions... Please ASK

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,985 Answers

Loose wire from battery to to ignition switch somewhere,
you need to do a wiggle test of wires .

Posted on Nov 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 dodge ram wont start after a minor front end collision on drivers side headlidht turns over wont start acts like no fuel


Check the ASD (automatic shut down) relay it may have tripped, it is cheap try replacing it. It is located in the under hood junction box.

Jun 07, 2017 | Dodge Cars & Trucks

1 Answer

I cant find the fuel pump acttuater on my 2008 dodge ram 6.7L diesel


Located on, high pressure fuel injection pump. Front right side of motor

Nov 15, 2016 | Dodge Ram Cars & Trucks

1 Answer

WHY DOES MY ISUZU 4HL1 ENGINE HAVE A HARD START ALWAYS?


no car stated, huge NPR truck no less.
no year stated
so no free book information on that engine,.
big diesel. 4HL1, no dash letter?
compression at spec.?
glow plugs work.,
filters clean. water in fuel,
does test fuel (spray'd) help? ???
injection problems
lack of startup air.(filter)


The 4HL1 is a common rail direct injection OHC 16V high-pressure fuel injection system diesel engine of 4.777 L capacity with electronic control system. Peak torque is 333 Nm, peak power is 140 PS (103 kW) at 3,000 rpm. Maximum torque is (34.0 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.
The 4HL1-N is a common rail direct injection OHC 16V high-pressure fuel injection system diesel engine of 4.777 L capacity with electronic control system. Peak torque is 333 Nm, peak power is 131 PS (96 kW) at 3,000 rpm. Maximum Torque is (34.0 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.
The 4HL1-TC is a common rail direct injection OHC 16 V turbocharged and intercooled high-pressure fuel injection system engine of 4.777 L capacity with electronic control system. Peak torque is 425 Nm, peak power is 160 PS (118 kW) at 2,700 rpm. Maximum torque is (43.3 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.
The 4HL1-TCS is a common rail direct injection OHC 16 V turbocharged and intercooled high-pressure fuel injection system diesel engine of 4.777 L capacity with electronic control system. Peak torque is 500 Nm, peak power is 179 PS (132 kW) at 2,700 rpm. Maximum torque is (51.0 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.

May 31, 2016 | Isuzu Cars & Trucks

1 Answer

2014 dodge ram fuel cut off relay location, had front end collision, fuses are good


You may want to check fuses again. The fuses can be bad and look ok. Go ahead and change your fuses out and see if that don't fix it. Not just the fuel fuses, but any associated with the engine components.

Apr 25, 2015 | Dodge Ram Cars & Trucks

1 Answer

Where is the oil pressure sensor on a 1992 dodge cummins?


It's mounted in the engine block under the injection pump on the driver side of the engine. It's right up against the power steering pump, above a motor mount.

Mar 17, 2013 | 1992 Dodge Ram 250

2 Answers

2001 DODGE Caravan was involved in a frontal collision and I assume that the emergency fuel shut off system was engaged. How do I reset/fix?


Have you replaced any of the Impact Sensors on the front? If not this will keep fuel from flowing. I have never seen or heard of one. Now their is also a relay for fuel system for collisions its in the main relay box under hood.

FYI : the fuel reset sw. are under the rear panels on cars and trucks. But the service web site does not show one for your van nor replacement parts are found.

Mar 06, 2011 | Dodge Caravan Cars & Trucks

2 Answers

Does my 1992 dodge ram van have fuel injection?


Yes this van is electronically fuel injected, the type of injection is MFI, this stands for multi-port fuel injection.

Dec 24, 2010 | Dodge Ram 150 Cars & Trucks

2 Answers

92 dodge ram cummins power steering?


Yes they have power steering.

Apr 22, 2010 | 1992 Dodge Ram 250

2 Answers

It starts fine, runs 20-30 seconds, runs rough,


check the actual fuel line. Also is it fuel injection or carberator

Aug 03, 2009 | 1992 Dodge Power Ram 50

1 Answer

Engine replacement


any of the non computerized aka 12 valve cummins will interchange going from the p7100 pump on the 94 to the ve injection pump on the 92 may mean rerouting some of the fuel lines to hook it up. make sure you use all the sensors from the 94 engine though so all your gauges read correctly other than the fuel system the engines are identical though so should have no issues doing this

Apr 27, 2009 | 1994 Dodge Ram 3500

Not finding what you are looking for?
Cars & Trucks Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...