Question about 1995 Chevrolet Lumina

1 Answer

What is the best way to change a brake light switch? It's on a 1995 Chevy Lumina car.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

1993-96 Vehicles
See Figure 2

What is the best way to change a brake light - 0900c1528006832d.jpg enlarge_icon.giWhat is the best way to change a brake light - enlarge_tooltip.gifspan><img src=
Fig. Fig. 2: Brake light or stoplamp switch mounting-1995 vehicle shown

  1. Disconnect the negative battery cable. -96 vehicles, remove the driver's side instrument panel sound insulator panel.
  2. Detach the switch electrical connectors.
  3. Remove the switch from the brake pedal bracket.

To install:
  1. Position the switch to the brake pedal bracket.
  2. Attach the electrical connectors.
  3. If removed, install the driver's side instrument panel sound insulator panel.
  4. Connect the negative battery cable.

Posted on Nov 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake and turn lamps work sometimes


I would try a new turn switch. The brake lights are routed through the turn switch, so if both are acting up, it could be the turn switch is bad.

Jul 11, 2012 | 1995 Chevrolet Lumina

1 Answer

1997 Chevy Lumina REAR BRAKE LIGHTS DONT WORK


This will either be a fuse or the brake light switch which is on the pedal it's self. More likely the switch as these are fickle at best.

Nov 22, 2011 | 1997 Chevrolet Lumina

1 Answer

Two of my brake lights aren't working, i already repalced the bulbs and it still did not work. i have a 1995 chevy lumina.


Sounds like a faulty brake light switch or a blown fuse. Check the fuse first and then the switch....near the brake pedal. Good luck

Feb 12, 2011 | 1995 Chevrolet Lumina

1 Answer

1995 chevy lumina dash and tailights are out. Plus the horn. Checked all fuses. heard it possibly might be the headlight switch. Is this true?


its the flasher stick pull just a bit towards u and it will work if you push it forward wont work,you'll see this by pressing the brakes {with the tail lights}--its the switch in the steering colum where the flasher shift is.

Apr 19, 2010 | 1995 Chevrolet Lumina

1 Answer

No brake light 1995 chevy lumina


check brake light fuse.. if is ok. replace brake light switch

Mar 27, 2010 | 1995 Chevrolet Lumina

1 Answer

Electrical diagrams for brake lights and turn signals, for a 1995 chevy lumina


In a Lumina if the brake lights quit working but the upper one in the rear window still works or your tun signals flash weakly or a different speeds the turn signal switch needs replaced. I will cure the problem. Not to hard a job, but does require removing the steering wheel and air bag assembly.

Jan 23, 2010 | 1995 Chevrolet Lumina

1 Answer

What causes the Anti Lock Brake Light to stay on in a 1995 Chevy Lumina


Brake module needs to be replaced. Disconnect your battery and the warning light will reset.

Jul 24, 2009 | 1995 Chevrolet Lumina

1 Answer

My 1995 Lumina LS 3.4L DOHC third brake light works, but not the main two. Everything else works fine.(turn signals and lights)


THE TWO SIDE BRAKES LIGHTS RUN WIRING THROUGHT HE TURN SIGNAL SWITCH.WITH THE 3RD BRAKE LIGHT WORKING THE BRAKE LIGHT SWITCH IS WORKING.99.9% SURE THE T/S SWITCH IS BAD

May 14, 2009 | 1995 Chevrolet Lumina

2 Answers

Brake lights 1997 Chevy Lumina


i would check the bulbs first. then continue to the brake switch

Sep 10, 2008 | 1997 Chevrolet Lumina

Not finding what you are looking for?
1995 Chevrolet Lumina Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...