Question about 2000 Dodge Ram 1500 Truck

1 Answer

Bad fuel conservation.i changed spark plugs. gapped them at 40. also new rotor,rotor cap and new wires,and a new coil. new exaust.

Posted by on

  • Anonymous Mar 19, 2014

    what do i do

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

Your mass air flow meter is your problem.it needs changing has it is not messuring the air to fuel mixture,causing to mutch fuel being used and not enough air good luck

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is there no spark to sparkplugs on a 1970 oldsmobile 350 rocket


Do you have power to the + side of the coil, and will the coil fire when you remove the ground connection ?

Sep 07, 2014 | Cars & Trucks

3 Answers

Ignition mystery! 1994 GMC Suburban 2500 5.7 mtr. No spark to spark plugs. Have spark from coil to distributor. Have changed coil wire, cap, rotor, ignition module, and coil. have 12.5 volts going to...


I guess you could have the ignition analyzed on an oscilloscope. Maybe a tech could see something then.
I always heard the only gap was the spark plug gap-the rotor has no gap-are you sure you got the correct rotor? And does it touch the top distributor cap coil wire tower?

Let us know. It is a mystery worthy of a solution.

Sep 21, 2013 | Chevrolet Suburban 2500 Cars & Trucks

1 Answer

Difficulty in pulling


incorrect timing, tune it up, new spark plugs, wires, distributor cap / rotor, faulty coil, check transmission fluid level, change fuel filter, make sure spark plugs have correct gap, very important. when is last time air cleaner was replaced ? do it.

Jan 15, 2013 | Cars & Trucks

1 Answer

Installed new engine now wont fire from distributor to spark plugs.


If you've got spark from the coil but not at the spark plugs, it can only be 1 of 3 things.
  • Bad spark plugs or plugs not gapped properly.
  • Bad spark plug wires.
  • Bad distributor cap and rotor. This is pretty easy to check. Open up the cap and look at the points on the underside of the cap and also the point on the rotor. If they look corroded or worn, then you should replace them.

Good Luck!
~Brandon

May 29, 2011 | 1994 Nissan Pickup

1 Answer

Turns over but wont start


First check for spark, pull a plug wire off at the spark plug and stick a screwdriver up in the boot. Hold onto the handle and hold the shaft near something bare metal. Have a helper crank the engine, the spark should jump a 1/4" gap. If there is good spark you have a fuel delivery problem. If you have no spark at the plug wire, do the same test at the coil wire. If you have no spark at the coil wire you have a bad ignition module. If there is spark at the coil wire but not the plug wire you have a bad cap/rotor/ wires. If it is a fuel problem it is probably the fuel pump.

Jan 19, 2011 | 1996 Chevrolet C/K 2500

2 Answers

I have no spark at plugs coil has good spark


If you have spark at the coil then you have a good coil. You can't measure Ohm at a spark plug since it is alway open at the gap. But you can OHM measure a spark plug wire at both end. If you have nothing mean your wire is bad. You can swap one more wire to confirm a bad wire. If your wire is not bad then I recommend to replace both rotor and distributor cap. Good luck in locating the problem.

Dec 28, 2009 | 1983 Honda Accord

3 Answers

Replaced coil, spark plugs,plug wires, rotor and rotor cap, and the part under the rotor (forget the name) car has a miss when idleing and when getting on it, NAPA said the spark plug gap should be .035,...


if this is a four cylinder engine,the plug gap is what NAPA told you,verify you have the right plugs and gap,next remove the cap again and verify the plug wires are pulled into cap where they will lock in.

Dec 20, 2009 | Chrysler LeBaron Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...