Question about 2000 Chevrolet Malibu

1 Answer

Replaced the fan resistor on 2000 chevy malibu this summer. Worked fine but recently the blower won't work on any speed.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 3,640 Answers

This could be a bad blower or the switch to blower,check at blower fan for power if no power it is most likely the switch.if there is power on all speeds then the blower is bad. check all fuses to verify.

Posted on Dec 11, 2009

  • carl Dec 11, 2009

    this could be a bad blower or the switch to blower,check at blower fan for power if no power it is most likely the switch.if there is power on all speeds then the blower is bad. check all fuses to verify.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 grand caravan blower motor intermittent replaced resistor


in review
the fan speed resistor is new
you bench tested the blower motor
12 volts test ..only runs it at full speed
if cabin filer want changed the blower motor would run hotter

could be the motor brushes or bush/motor bearing when slowed
you might want to inspect the brushes and clean the dust out of the motor
if no better
does that have climate control ?
might be the fan switch itself or the earth isnt so good

pm9193-front-vpok4bnazo4imyyhqje4rxo2-4-0.jpg

images-vpok4bnazo4imyyhqje4rxo2-4-1.jpg

Apr 01, 2017 | 2000 Dodge Grand Caravan

1 Answer

Low and medium speed fan for ac does not come on, while high speed fan works. 2000 1500 dodge van, had new condensor unit under dash replaced recently.


Blower motor resistor needs replacing. Follow wires from blower motor to connector, which should be the resistor. Usually in duct work, held in by 2 small screws.

Jul 25, 2011 | 2000 Dodge Ram 1500 Truck

1 Answer

1996 chevy tahoe 4 w d 5.7l. recently replaced fan speed switch, resisitor and blower motor. worked fine for a few days and now nothing. all fuses are good. replaced resistor relay today. all ground...


Take a good look at all the connectors, especially at the blower motor switch and speed resistor. I find many of these connectors will be slightly deformed or melted from overheating and will not work even when plugged into a new switch or resistor...or may work for a bit then quit. If you find a bad connector the best thing to do is to replace the connector with a new one [they have to be spliced in] . Hope this helps and good luck!

Mar 18, 2011 | Chevrolet Tahoe Cars & Trucks

1 Answer

Fan motor on a 2000 Chevy Malibu only works on 3-5 and not on 1 & 2. How to fix?


Its the blower motor resistors or the switch itself.
You need shop manual. Then remove the switch and jump certain terminals with a jumper wire to see if fan runs at certain speeds. If fan runs at all speeds when jumped then the switch is your problem . if it runs at the speeds you described in your write up then its the resistors.

Jun 04, 2010 | 2000 Chevrolet Malibu

1 Answer

2000 Chevy Malibu blower motor doesn't work on positions 1 & 2. Would appreciate details on how to fix or change it.


remove dash insulator from under glove box. then move bcm to one side, fan resistor is beside the fan blower motor. the resistor will keep fan speeds from working. remove wiring and screws from resistor then take it out.

Sep 08, 2009 | 2000 Chevrolet Malibu

2 Answers

Blower fan resistor module replaced, worked for 2 days quit again


HIGH RESISTANCE IN THE BLOWER MOTOR CAN CAUSE YOUR PROBLEM, OR A BAD RESISTOR.
THERE IS NO REAL GOOD WAY TO CHECK THE RESISTANCE OF THE BLOWER MOTOR.

Jul 16, 2009 | 2005 Chevrolet Malibu

2 Answers

Blower motor or resistor?


Yes its the blower motor resistor.

More then likley theres some trash or something in it, or possibly the motor itself is on it's way out. There not that bad to pull out of that body car, just pull it out and see what you can see.

The blower motor is under the glove compartment

You can replace the resistor on your own. Please find a detailed diagram which would guide you to do it.

http://autorepair.about.com/library/images/bl629a-lib.htm

Thanks

Apr 09, 2009 | 2000 Chevrolet Malibu

1 Answer

Blower motor or resistor?


If it was the motor that went out then it would not blow at all. The resistor is the culprit that starts killing off speeds. It should be about $25 to $30 at an aftermarket store like autozone or advanced auto parts.

Jan 09, 2009 | 2000 Chevrolet Malibu

Not finding what you are looking for?
2000 Chevrolet Malibu Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...