Question about 1994 Land Rover Discovery

1 Answer

We have a landy 1 wheels 235/70/16 rims are 16x7j standard can we put 265/75/16 on we have a 2in lift on the disco

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Land Rover Master
  • 6,982 Answers

Likely you will end up with the same or similar footprint on the ground, but, the change will cause the speedometer to read lower than actual speed.
since the vehicles computer also uses that info, you may see a performance fall off due to that. The additional tire diameter will also put a bit more strain on the driveline as the further away from the axle center the tire tread is the more torque it takes to turn the axle (the inverse of how a lever or long wrench works) Therefore, the tires may physically fit but you need to consider these things before going ahead with it.

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the flat tire


Hi Frank:
- Block the diagonally opposite tire.
- Set the parking brake
- Put the transmission in Park or Low gear.
- Set the jack under the frame or body lift point.
- Jack up until tight against lift point
- Remove trim cover if present
- Use wheel nut wrench to loosen nuts. Do not remove nuts.
- Jack up until wheel off ground.
- Remove wheel nuts.
- Wheel should now be able to be removed. Sometimes they will need a kick to loosen them. If still stuck, reply as a COMMENT to this e-mail and I'll give you some other hints.
If you want to remove the tire from the rim, click on this youtube link.
https://www.google.ca/#q=youtube+remove+tire+from+rim
Cheers.

Jan 21, 2016 | Cars & Trucks

2 Answers

Can I put 275 70 17 tyres On my standard 17 inch wheels. On it now is 265 65 18


NO you can only put 17 in tires on 17 in rims and 18 in tires on 18 in rims ,

Jan 20, 2015 | Cars & Trucks

1 Answer

Going to buy a 2003 mazda mpv but there is no spare do they come standard with a spacesaver or a proper 15in spare wheel and tyre


FACTORY SPARE TIRE IN TRUNK HAS LARGER RIM. THE RIM IS 2 INCH BIGGER IN DIAMETER TIRE HEIGHT AND RIM WILL GIVE CAR CORRECT WHEEL HEIGHT.IF YOU DONT HAVE FACTORY SPARE TIRE.YOU CAN BUY SAME SIZE RIM THAT YOU HAVE ON YOUR VAN AT SALVAGE YARD PUT USE TIRE ON RIM OR GO TO DEALERSHIP THEY CAN GET YOU A FACTORY SPARE TIRE.

Mar 20, 2011 | Mazda MPV Cars & Trucks

1 Answer

What is standard wheel size for toyota celica 2002 and what sizes will fit


alloy wheels

Wheel Part Number: #69387
2000-2005 Toyota Celica
Size: 15" x 6.5", 5 Lug, 100mm Bolt Pattern
Finish: Silver
Description: 5 Double Spoke OEM Alloy Rims

steel wheels

Wheel Part Number: #69386
2000-2005 Toyota Celica
Size: 15" x 6.5", 5 Lug, 100mm Bolt Pattern
Finish: Black
Description: 12 Hole Original Steel Rim

Dec 04, 2010 | Toyota Celica Cars & Trucks

1 Answer

Can't get rear brake drums off.


1 - Remove the tire and rim
2 - clean the hub surface as sometimes there is a hold down screw through the drum into the hub. (probably not on this car, but look anyway)
On drum brakes the shoes will wear into the drum and have to be adjusted back out for the drum to be removed.
There is a slot on the back of each brake backing plate for this.
Remove the rubber or plastic plug and insert 1 small screwdriver (standard) and 1 larger one (or a brake adjusting spoon) into the opening.
The smaller one is to lift the locking plate away from the adjuster wheel, and the larger one is to rotate the wheel to loosen the brake shoes until the drums will come off.
There are many diagrams for drum brakes on the web, so please get familiar with the basic parts first.

Jan 23, 2010 | 1996 Chevrolet Cavalier

3 Answers

How to remove stuck tires and rims off rear of 2001 f 250.


Greetings: My 97 F 250 has the aluminum wheels. The Aluminum of the rims actually becomes welded to the steel hubs after some time. I have beat on those things with various types of hammers and blocks. I've put a 6' length of 2" pipe between the shackles and wheel in an attempt to pry it of. Tires just absorb all the energy. After hours of frustration I figured out that a standard digging bar will fit between the drum and the wheel. It is tight, but it will fit. Popped both rims off in just a couple of minutes this way. Pry it till it moves, spin the wheel a bit and pry again. You will have to work it all the way around the wheel, but it will come off.
70e8aa04-73ed-407d-86c6-e40620cac7cc.jpg 33777f67-daff-402f-ac36-9615c984f9a9.jpg

Nov 19, 2009 | 2001 Ford F250 Super Duty Super Cab

1 Answer

Breather hose covered in black oil what can caurse this breather was replaced 5 months ago now oil hose soaked in oil is it serious its a landy 1994 disco


Any oil leak should be attended to ASAP for obvious reasons... could be a split hose or excessive crank case pressure. If the oil loss is minimal then no need to panic but I would get it looked at by a Land Rover speciallist.

Nov 18, 2009 | 1994 Land Rover Discovery

1 Answer

1993 park ave camber adjustment issue's


Not to be smart, all vehicles are not able to keep their stock adjustments when certain add on's are installed.You look good but you have the wrong car to make you feel and look good at the same time.sorry this is a lesson we learn one at a time.Dont feel bad look good as long as you can.then go back to your standard rims.

Aug 04, 2009 | 1999 Oldsmobile Bravada

1 Answer

98 disco 300tdi with rear wheel bearing problems


I would just replace the bearings, They're not that expensive and they're quite easy to replace. After replacement, if it happens again on the same wheel, you probably have a bent semi-axel. I had this exact problem on a '93 200tdi disco.

Jun 07, 2009 | 1998 Land Rover Discovery

Not finding what you are looking for?
1994 Land Rover Discovery Logo

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...