Question about 2006 Ford Ranger

1 Answer

Eng hot blower works no heat thermo has been changed

Posted by on

  • 1 more comment 
  • wwithington Nov 17, 2009

    sorry i tryed to keep it short
    engine heat is normal,the blower works ok, but
    ther is no heat the termostat has been changed
    but still no heat.

  • mtatnall May 11, 2010

    ? PLEASE TRY AGIAN, I DO NOT UNDER STAND.

  • yadayada
    yadayada May 11, 2010

    are you saying u have no heat in a round about way??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,235 Answers

Ok thanks for that, u will need to replace the air temperature control blend door and the electric actuator that moves it, which takes all day and u must remove the dash or you can install an after market kit that resolves the problem is about 2 hours, here is a link to ebay where the kit is sold, it is called a "HEATERTREATER"

http://cgi.ebay.com/ebaymotors/Ford-Ranger-Blend-Door-heater-AC-fix-HeaterTreater_W0QQcmdZViewItemQQhashZitem3eec853a50QQitemZ270256126544QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My heat or defraust works on my 89 Cadi Devile just continues to blow cold air


Is your eng get warm if you eng is not heating up it can be a thremaste stuck open if the eng is heating up ck the heater hoses if the top hose is hot and the bottom is cold the heater core is pluged if the two are hot and warm the blend door is not working

Mar 06, 2013 | Cadillac DeVille Cars & Trucks

1 Answer

I have 2000 astro van and I'm not getting heat, I changed thermo stat and flushed heater core. Still no heat, whats the next step?


Feel your heater hoses. If both are hot, the core is circulating. If only one is hot-poor or no circulation of the core.
If the heater core is circulating, the temperature blend door may not be working to let blower air pass across the heater core, and into the vents. If vacuum operated, watch the vacuum valves as you move heater controls-you may spot the problem. Check that the vacuum line from the engine to the control switch is working and still connected. If not operated by vacuum, the controls may have cables to the heater case or may be electrically operated. You'll just have to scope it out. Good luck.

Nov 24, 2012 | Chevrolet Astro Cars & Trucks

1 Answer

AC works Blower works but no heat .Ford 2008 4 liter Ranger sport


It sounds like your actuator door. Its the door that changes your temp from hot to cold and is located behind your dash. Hope this helps

Oct 26, 2012 | Ford Cars & Trucks

1 Answer

I have a 2000 nissan xterra my heat dont warm up i change my thermo stat if i get my heater core flush what are my chances of it working what are the major problem with the 2000 nissan xterra i done...


forget all the above items you mentiond,the heater metrick/core should be ok if you put a cooler flush through the system,im looking at the thermo switch mounted on the top of the water system it will have two wires on it and tells the engine when to let hot water through the core,also if its not working the engine will not perform great so try this and forget about new spark plugs/wires/coil pack ,as these are nothing to do with heating.adrian,,,

Dec 31, 2010 | 2000 Nissan Xterra

2 Answers

Blower comes on but no heat comes out


If the blower is blowing air just fine, but you cannot control the temperature, you need to listen to air coming from the vents while turning the temperature from hot to cold. If you do n ot hear any change in airflow, then you may a temperature door in the dash broken. this is becoming a common problem on the Equinox

Mar 04, 2010 | 2000 Ford Mustang

1 Answer

My 2001 Chrysler Town & Country recently loss it's heater ability. When engine is warm, it barelys puts on at the highest setting. I changed thermo stat which did look worned but no help yet. I can't...


Since your blower is working and it is a heat issue,thats where we'll start,First thing is have you checked the coolant level in the radiator when engine is cold,make sure it is filled to top,next verify you have coolant in reserve ,Start your van and get it up to normal operation temperature,If your heat gauge on the dash works correctly it should be 190 degrees,Now lift the hood and locate the two heater hoses going into the heater assembly at the fire wall,Both hoses should be hot to hold on to,if both are hot and no heat inside your problem will be the blend air door in heater assembly.
if neither hose is that hot you need to replace the thermostat in the engine to get it up to 195 degrees.
if one hose is hot and one is luke warm then the heater core is blocked and to blame. hope this helps you

Dec 31, 2009 | 2001 Chrysler Town & Country

3 Answers

1999 ford taurus no heat change thermostat checked hoses flushed heater core and radiator


Is the blower motor working? If not that is what it is. If it is working then check heater coil out, Could be bad heater coil.

Nov 10, 2009 | 1996 Ford Taurus

2 Answers

The blower works and a/c works but no heat comes out


If the blower is blowing air just fine, but you cannot control the temperature, you need to listen to air coming from the vents while turning the temperature from hot to cold. If you do n ot hear any change in airflow, then you may a temperature door in the dash broken. this is becoming a common problem on the Equinox

Tech JK
-------

Oct 11, 2009 | 2006 Chevrolet Equinox

1 Answer

No heat, heater core is good,blower moter works


Check the operation of the heater control valve. If it doesn't open up no heat. If the cable moves the control on the valve take the valve off and check it manually. The lever may work but the valve still doesn't open.

Sep 30, 2009 | 2002 Mitsubishi Galant

Not finding what you are looking for?
2006 Ford Ranger Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...