Question about Chevrolet Suburban 1500

1 Answer

Looking for transmisson for 1999 4+4 suburban what years will fit

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Chevrolet Master
  • 3,854 Answers

The years will fit is 1998 to present 4l60E for the 1500 suburban. Your transmission on your Suburban is a 4L60E, just make sure it's a 4L60E for the years of 1998 to present. 1997 was the change year and the transmission was sectioned in to a three piece housing where the older 4L60E was a one piece housing and the older housing had a 4 bolt end on the tail housing as to the newer ones have a 5 bolt, the internals are the same through out the years. Good luck and hope this helps.

Posted on Nov 17, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to know what years of transmission will fit in 1997 suburban 4X4

Any truck with a 4L60E transmission and 4 wheel drive.

Aug 28, 2012 | 1997 Chevrolet Suburban

1 Answer

Location of knock sensor on 1999 chevy suburban

well i'm not familiar with 1999 suburban and the location depends on the year model.
so, you can just try to find it under the intake manifold...
hope helpful
best regards

Oct 26, 2011 | Cars & Trucks

1 Answer

Hi, I have a 2007 Chevy suburban that is extracting voltage while it sits causing our vehicle not to start and buying new batteries every 1.5 years. what could be causing the battery to extract voltage...

Fit an extra battery on the driver side its got a tray fitted already,just fit and run an earth lead and a positive lead.this will cure your problem.There is such a lot of electrics on the suburban that the battery ic drained and charged too often,its like your cell phone when you get it new it lasts for days and after a year it has to be charged every day.Hope this helps.

Nov 18, 2010 | 2007 Chevrolet Suburban Three-Quarter-Ton...

1 Answer

I have 1998 suburban and I cannot get the car to run

I would check for spark at the spark plugs with a spark tester. Also, I would check for fuel pressure at the fuel fitting, that fitting is on the driver side, towards that back of the intake manifold on the fuel rail.

Apr 28, 2010 | 1999 Chevrolet Suburban

1 Answer

I have two cilynder heads crack on my 1999 gmc suburban i but a motor from 1997 chevy van they both vortec are they the same cilyder heads

yes,as long as the years are the same ,or close,look for mounting brackets,and such to be the same,

Dec 09, 2009 | 1999 GMC Suburban

1 Answer

Will any 454 chevy motor fit into my 4x4 auto 1999 2500 suburban

the suburban engine compartrment allows for avery large V8s to be installed within its interior and yes any 454 will fit

Sep 15, 2009 | 2002 Chevrolet Suburban 2500

3 Answers

I just replaced the gasket of the transmission pan and still have a leak on my 1999 chevy suburban?

The leak is coming from the pan ??
Maybe the leak is traveling to the pan seal area from somewhere else ?
Did you scape off the stuck-on old gaskit on trani and pan ?
Its customary to use gaskit sealer on both sides of the new gaskit..

Aug 13, 2009 | 1999 Chevrolet Suburban

1 Answer

Steering wheel seems to be all over the road

I have a 2001 Suburban and I know that there was a recall on the Half shaft...mainly for noises, but I would look online for a recall list for your particular year. The Half shaft is what your stearing wheel is hooked to under the hood. Also, I would check the shocks and other stearing components.

Jun 16, 2009 | 1999 Chevrolet Suburban

2 Answers

1999 lincoln town car transmisson dip stick

Look at the back side of motor on passenger side. It is black so sometimes kinda hard to see and is tucked up under the plastic wiper motor housing.

Mar 16, 2009 | 1999 Lincoln Town Car

1 Answer

I have a 1999 Suburban,just got a rebuilt trans. 2 years ago. Now,it won't shift from second to third?

I had a 1999 tahoe, If its the same problem I had it could be a shifing solenode inside the tranny.

Jan 30, 2009 | 1999 GMC Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides