Question about 2005 Chevrolet Malibu

Open Question

My 2007 Chevrolet Malibu DIC display went off. What could be the problem, and how to fix it? Thanks. Amir, DFW, Texas

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 134 Answers

SOURCE: NEED 2007 CHEVY MALIBU RADIO CODE

I just got the code for my radio by calling 1-800-537-5140 and choosing the option for my vehicle make. 1 for chevrolet. then i entered 106010 for the customer # and then entered my serial # from the stereo and it gave me a lock code for free. Now i am just trying to figure out how to enter it since my manual tells me to take it to the dealership. Now that you have your 4 to 6 digit code, you can enter it by following the these steps. 1. Make sure your ignition is in the "on" position, but no started. 2. Press/Hold the "HR" button to set the first 2 or 3 numbers. 3. Press/Hold the "Min" button to set the next 2/3 numbers. 4. Press the AM/FM button one time. "SEC" should be displayed. You can now turn the radio on. Good luck!

Posted on Oct 28, 2009

  • 85 Answers

SOURCE: The auxiliary power outlet in my 2007 Chevrolet

the manual should say or the cover of the fuse box, if not i wouldnt go any higher than a 15amp maybe even try a 10 first

Posted on Feb 24, 2010

  • 30 Answers

SOURCE: DOORS displays on DIC in 2007 Hummer H3. All

i beleive those have their own door switches in latch i would try to clean latches with spray brake kleen then blow out, lube with a spray lube like wd40 that may solve your issue. while your doing this remove negative battery cable so the ecm has to recheck doors system.

Posted on Mar 18, 2010

  • 14036 Answers

SOURCE: 2007 Chevrolet Monte Carlo SS DIC "Service brake

TAKE TO DEALERSHIP.YOU HAVE A BRAKE MECHANICAL PROBLEM.DONT KEEP DRIVING. NOT SAFE UNTIL CHECKED OUT. GET TO SHOP SOON AS YOU CAN.

Posted on Sep 22, 2010

ftw1952
  • 10319 Answers

SOURCE: 2007 silverado. dic display does

the display is faulty ready to burn out soon since its weak now

Posted on Mar 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 chevy cobalt i just chnaged the oil and now its telling me to chnage the oil soon


Press the INFORMATION and RESET buttons on the DIC at the same time to enter the personalization menu. Press the INFORMATION button to scroll through the menu until OIL LIFE RESET is displayed. Press and hold the RESET button until the DIC display shows ACKNOWLEDGED

Nov 17, 2016 | Chevrolet Cobalt Cars & Trucks

1 Answer

How can I change language in DIC (to English)?


The radio displays driver information center (DIC) information when it first powers up. The uplevel radio shows the time and outside temperature on the first line of the display, and DIC information on the second line of the display.
There are 3 DIC buttons on the radio.
?€¢
ENTER


?€¢
INFO


?€¢
MENU

Mar 15, 2016 | 2005 Chevrolet Malibu

2 Answers

How to reset the instrument panel on the 2005 malibu to english


Here you go Jane ! this right out of a service manual for your car !
Hope it helps you out .
LANGUAGE: To select your choice of language, use the ENTER button to move between the optional languages. The languages are English, French, German and Spanish. Choosing a language will display all of the information on the DIC in the desired language. When you have made your choice, press the MENU button for at least one second to record your selection. The initial setting from the factory is ENGLISH.

ENTER: The ENTER button is used to reset certain functions and turn OFF or acknowledge messages on the DIC display. The ENTER button also toggles through the options available in each personalization menu.

Jun 29, 2015 | 2005 Chevrolet Malibu

4 Answers

Show me where my fuel reset button is located on my 2004 chevrolet malibu


This vehicle does not have a reset switch nor a inertia switch. what is the problem?

Apr 19, 2015 | 2004 Chevrolet Malibu

2 Answers

Does a weak alternator cause DIC panel to be dim or out?


No. The cause of a dim or dark driver info display is a weak/broken solder connection, usually one or more resistors/rectifiers, on cluster circuit board. An electronics repair service that specializes in cluster repair can usually correct this issue and usually at a reasonable cost compared to replacement cost at you local GM dealership. Good luck. Ron @ Speed-O-Repair.

Apr 30, 2014 | 2007 Chevrolet Tahoe

1 Answer

I accidently (i don't know how i did it) changed my units to metric. I need to go back to standard units. How do I do this?


On the DIC (drivers information center) keep pressing to get to units change english to metric then exit.

Oct 19, 2013 | 2007 Chevrolet Malibu SS Sedan New Cars

1 Answer

RESET CHANGE OIL


Hello rossy valenz: My name is Roger and I will help you. To reset your indicator. Display "OIL LIFE RESET" on the DIC instrument cluster. Press and hold the ENTER button forat least one second. An acknowledged display message will appear for three seconds or until the next button is pressed. This will tell you the system has reset. Turn the key of. If the "change oil soon" light comes back onthe syustem did not reset. Try resetting the system again. Should you need further help please just ask. Please rate the answer. Thank You for using Fix Ya. Roger

Jun 28, 2011 | 2005 Chevrolet Malibu

1 Answer

2005 malibu maxx showing power steering message on dic, But I can reset it and its still easy to steer. should I be concerned with this or should i just email the nhtsa.


My Name is Courtney and I had my car a week and the power steering went out, I don’t have the money to fix it, I need your help with getting this problem straight with Chevy. I’m tying to get a RECALL so people can get their money back, or get the car fixed for free. Please call Chevy customer hotline at 866-790-5700, ext 42864, this is who I talked to. And email me at courtney.pillow@yahoo.com, this is not right, we need to do something about it. Or call customer assistance, 18002221020 email nhtsa

Oct 22, 2009 | 2006 Chevrolet Malibu

2 Answers

I cannot get the Change Oil Soon message to reset on a Pontiac G6


Chevrolet Malibu, Malibu Maxx 2004-06; 2006 HHR, Cobalt, Pontiac G6, Solstice
Turn ignition to run engine off. Display OIL LIFE RESET in the Driver Information Center (DIC). Press and hold the ENTER button for at least one second. An ACKNOWLEDGED’ display message will appear for three second or until the next button is pressed. This will tell you the system has been reset. Turn the key to OFF. If the “CHANGE ENGINE OIL” message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.

Jul 17, 2009 | 2007 Pontiac G6 GT Convertible

1 Answer

4 cylinder 2007 chevy malibu


they have a reset circuit breaker they are not fused.

Sep 18, 2008 | 2007 Chevrolet Malibu SS Sedan New Cars

Not finding what you are looking for?
2005 Chevrolet Malibu Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...