Question about 1992 Ford Crown Victoria

1 Answer

Leaks oil ,changed oil pressure switch, still leaks. was told gasket behind oil filter housing could be problem.

Posted by on

  • marvin
    marvin Mar 28, 2014

    having problems removing housing, cant get the last bolt off the right side, any suggestions?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,822 Answers

This is possiable, the best thing to do is have the engine cleaned of all residual oil and then drive the car a few ays and recheck the leak, it will be easier to see the source of the leak that way, on oil leaks i hate to guess, oil gets blown everywhere by road draft so it come from up front and be all over the side of the engine

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil is leaking, how can I tell if engine main


You don't give make or model. Here goes , The engine has a rear maim seal behind the fly wheel if it leaks the leak will be from the clutch housing. It has a front seal behind the crank shaft timing cover.it can leak from there . it can leak from the oil filter and oil pressure switch . Can also leak from the top timing cover gasket and cam shaft seals.

Sep 21, 2014 | Cars & Trucks

2 Answers

Oil leaking from oil filter adaptor


i gotta 1950 ford coupe leaking oil out the oil filter housing and i can't find any solutions my gaskets are brand new anybody out there kno what my problem is then please tell me

Mar 22, 2011 | Chevrolet Equinox Cars & Trucks

3 Answers

Oil is leaking from where the oil filter is screwed into... is this the oil pump? is it difficult to replace?


Oil pump?

Your filter is leaking, check it out.

Can only be the adapter or the filter gasket

Feb 19, 2011 | 2005 Chrysler Town & Country

1 Answer

98audi a4 Q 2.8 cracked oil filter housing?or cooler?same thing?


hi did you get a solution for this? the same thing happened to me too.I had my oil change yesterday and today I saw the engine oil pressure lights come off and the oil started leaking very bad and the mechanic told me that the oil filter housing cracked.

Mar 11, 2010 | 1998 Audi A4

1 Answer

Need diagram to change oil for a 2005 Chrylser


Drive car on ramps or 2 2x12s reach behind oil pan remove bolt drain hot oil from car that has just been driven.into pan. When oil is just dripping very slow say 15 min replace plug. Now just behind front bumper next to engine is an oil filter remove it with an oil filter wrench. Make sure the gasket came off with the filter or just reach up with a clean rag and wipe the housing it will fall off if you touch it. Put oil on gasket of new filter and screw it on when the gasket touches the housing go 3/4 s of a turn more. Put in about 5-1/2 to6 quarts of 10w 30 oil. Start engine for a min ck for leaks shut off and ck dip stick and make sure it reads full after sitting 5 min or so to let oil dip down into pan

Dec 27, 2009 | 2005 Chrysler Pacifica

3 Answers

1996 Honda Accord 2.7L/V6 oil leak near oil filter/oil switch


my car was doing the exact same thing and i spent about 18 hrs total trying to figure out. if you remove the oil filter, you will notice that the "bracket" that the oil filter attaches to is removable. remove the ENTIRE oil filter assembly. there is a bolt almost behind the crank pulley, its tricky to get to but you can get to it with a 1/4 in drive, swivel, and extension, i do believe it was a 10-12 mm socket (MUST BE ^POINT SHORT WELL) the top left bolt on the assembly you will notice that you can not get out. that is fine, take the rest of the bolts out and let the assembly hang from that bolt, BUT the bolt must me loosend all of the way to achive play in it. take a small screw driver and "break" the seal on the assembly. you will notice 2 holes. around those two holes is a single gasket. even the smallest crack will aloow oil to drip. my car was using about a gallon of oil every ten miles, so you can imagine how much oil i when through, replace the gasket. You can not get the rubber gasket ANYWHERE except a honda dealer. replace. put it together and you all set.

BASIC STEPS: RAISE PASSENGER SIDE.
REMOVE TIRE
REMOVE OIL FILTER
REMOVER ASSEMBLY
REMOVE GASKET
AND REPEAT BACKWARDS FOR INSTALLATION

Jul 13, 2009 | 1996 Honda Accord

2 Answers

1998 s10 oil leak


hi dose it have a oil cooler on it 2 hoses going from oil filter housing to rad .if you do he mite of broke the seal on it

Apr 06, 2009 | 1998 Chevrolet S-10 Pickup

2 Answers

OIL LEAK COMING CLOSE TO THE OIL FILTER


if you had recently done or had an oil change done sometimes the gasket from the old oil filter sticks to the block. when you install the new oil filter it ends up with 2 gaskets and leaks around the base where filter meets oil cooler. another posability is the oil pressure sending unit is mounted just above the filter.

Mar 23, 2009 | 2000 Volkswagen Beetle

2 Answers

Oil leaks from the oil filter adapter


If it is not the suggested gasket that is leaking then it is the oil pressure switch located exactly above the oil filter adapter. The black plastic housing could have developed a crack and oil will ooze downward and drip off the bottom of the adapter. I had this problem and changing the oil pressure switch took care of it.

Dec 17, 2008 | 1993 Honda Accord

1 Answer

F250 351


from what your explaining the housing the filter screws on to two types bolted unit wich there is a gasket in between block and plate or another style is held with only the threaded piece that the filter screws on to it usaully has a area where a wrench can fit unscrew the hole shaft replace gasket behind the housing one other problem i have seen were somone had changed a oil filter not relizing the gasket stayed on the housing check to make sure there isnt two gaskets only one on the filter

Aug 07, 2008 | 1997 Ford F250 SuperCab

Not finding what you are looking for?
Cars & Trucks Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...