Question about 1993 Chevrolet Cavalier

2 Answers

Headlights stopped working, not a fuse, and turn signals dont work but emergency flashers do.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

You probably have a bad headlite switch, check wiring for corossion as well, good luck

Posted on Nov 17, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi, if the turn signal is on the same stick as the lights then you need to look at replacing the control if they are seperate then you need to locate the wires and unplug them then plug them back in this may solve your problem, if not it would be a case of testing each wire for power and locating where the break in the wire is

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Turn signals on my 97 f150 dont work when headlights are turned on


Not real sure but have you tried changing out the flasher relay?

Nov 05, 2012 | Cars & Trucks

1 Answer

Turn signals wont work bulbs ok dont have a manual to the car dont know wich fuse goes to the turn signals


pickup a test light and check all the fuse if the fuses are good then you probably have a bad signal flasher.make sure you change the signal flasher and not the emergency flasher as they look the same.

Jul 30, 2011 | 1995 Ford Mustang

1 Answer

My turn signals have stopped working. I replaced a bulb, thinking that was the problem but they still dont work. I think it may be the actual turn signal switch (in the steering column) but was wondering...


The flasher relay is mounted in the main fuse panel under the dash, driver's side.Are the lights coming on at all, or is there nothing ? it is possible that you may have a bad ground wire to the signals. Do the emergency hazards work ( lighting up and flashing?)If so, then your ground is good and it could very well be the flasher. You should be able to switch the emergency flasher for the turn flasher for a test of the circuit. The flashers should be mounted side by side in the fuse panel - just exchange them and test. If so, keep the emergency flasher there and take the turn flasher in to replace. The parameters should be the same so you can just leave the E. flasher relay in place and out the turn flasher where the E. flasher was.

Nov 05, 2010 | 1991 Ford Thunderbird

1 Answer

I drive a 2000 mitsu. mirage. my turn signals just stopped working. i checked the bulbs the fuses they're good. the emergency flashers work im wondering if maybe its the turning module but i dont know...


The emergency flasher switch is also the turn signal flasher It pops out of the dash and can be replaced easy. do chaeck the fuses before going to this much troble. check all the fuses as some work backup circuits that you wouldn;t think would be important. Before replacing the flasher switch ( you may only be able to buy it from the dealer) work the switch several times and the flashers will come on cheak to see if allthe lights work thenturn the flashers off and see ( with the key on if the turn signals now work. Now if during the test with the four way flashers you see a bulb or more out you know that the turn signals wouldn't work, but the four ways will. they work on different fuses so chak the turnsignal fuse too. after cycling the switch try the turn signals again as the switch is likly to stick and sometimes cycling it will get the turn signals working again. Fooling around with the switch you may find a position that the turn signals work. if you can't get it to stay working then you'll have to change the flasher emergency switch.

Sep 30, 2010 | Mitsubishi Mirage Cars & Trucks

1 Answer

Both my turn signals and emergency flashers stopped working


hi...
there is a relay which connects turn indicator and the emergency flashers which is provided for the timing of the flash.this timer relay may got burnt or damaged. even though the fuses are OK the turn indicators wont work. please check this.

please rate me weather the information which i provided was usefukll to you by clicking on the thumbs present on the end of your page.thank you

Jul 09, 2010 | 1999 Ford F350 Regular Cab

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

1 Answer

Turn signals and emergency flashers quit working.


check and replace the flasher unit if necessary, sometimes located in the fuse box area, sometimes under the dash near the steering column

May 18, 2009 | 1997 Ford Taurus

1 Answer

Blinker dont work flasher and other lights work


The turn signals don't work, but the emergency flashers do? If that's the case, replace the flasher, you have 2 flashers, one for emergency (hazard) flasher, and one for the turn signals. It should be on the fuse block under the dash.

Oct 23, 2008 | 1995 Jeep Cherokee

3 Answers

Blinkers stopped working


Your F--150 has 2 flashers, emergency and turn signal. Both are mounted on the fuse block under the dash. The turn signal flasher is mounted on the front of the fuse panel, the emergency flasher is mounted on the rear of the fuse panel. so replace the turn signal flasher should solve the problem. Let me know how it goes.

Oct 20, 2008 | 1996 Ford F150 Regular Cab

Not finding what you are looking for?
1993 Chevrolet Cavalier Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...