Question about 2005 Chrysler Pacifica

1 Answer

The ABS light is now on. should i have breaks

The ABS light is now on. should i have breaks checked??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 412 Answers

Dear ABS Light.......The answer is YES!!! If your ABS light is on then obviously your abs system is either completely inoperational or you have oe or more component in your abs that has failed.As long as you are able to safely drive it I would recommend getting your vehicle down to a reputable service shop to inspect that light.I would normally say to inspect these yourself but unfortunately this repair requires a scanner that is fairly expensive and is application specific.I HOPE I COULD HELP!!!

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS and handbrake light beeps while driving


ABS warns you about a problem in your ABS System starting from the fuse, or relay and the other light is not for the hand break ! it's warning you about your break PADS.
So change your break pads and check your ABS system functionality.

Mar 23, 2017 | Cars & Trucks

1 Answer

Hyundai trijet just had abs ring changed on passenger front now abs light stays on and hand break light stays on. Help.


If a wire was broken replacing the reluctor ring, this would be the ABS light. Not the brake light. Check the brake fluid, check the E brake pedal/handle. The rings do break, I just weld them back in place. If they are gone, it gets a new axle.

Sep 11, 2016 | 2005 Hyundai Trajet 2.0

1 Answer

Break lights on


Check the abs module for trouble codes. You will need a high end scan tool or a specific abs code reader to do it. The brake light is on likely because the abs light is on. The airbag light might be a different story. Does the horn and cruise work?

Jan 23, 2012 | 1999 Dodge Caravan

2 Answers

My ABS light came on in my 99 honda accord what does it mean?


Normally when your abs light comes on, that is referring to your breaks. This could be low break fluid, leak in break hose somewhere, or need breaks checked. Most cars now a days, have a sensor that is part of and hooked up to your breaks, and that will trigger your abs system (which is breaks) and let you know if your pads are low, or to the ware mark. So Here is what you first do, is check your break fluid and make sure that resavor is full, check under car to make sure there is no leaks, under car and inside each wheel area where breaks are, and then next step, is Les Swab can check your breaks for free and let you know if your pads are down to the ware mark. Let me know, Mike

Sep 14, 2011 | Honda Accord Cars & Trucks

1 Answer

My 2002 Tribute ABS Light & Break Light are both illuminated: break pads and rear drums were replaced march 2011: i know abs is tied in with the break system: what could this possibly mean for break...


hi.

if both lights are on together the car needs to be checked by a professional immediately.

it could be as simple as a loose connection after the work done in march, but both lights together could also mean a MAJOR fault in the ABS system that could result in loss of brakes.

an ABS system is not something that is servicable yourself.
it needs professional diagnostic equipment.

i can only recommend that you drive as little as possible, and get the car checked as soon as you can.

Jun 09, 2011 | 2002 Mazda Tribute

1 Answer

Abs lights on


if your abs light is on, then check break pads. usually when your break pads are really low the light comes on. also you may just have a busted abs sensor

Feb 27, 2011 | 1997 Chevrolet S-10 Pickup

1 Answer

Abs light on


ABS is the anti binding system this is the system that reduces your car from skidding if you break hard. on older cars you may have been told to pump the break in an emergency to reduce skidding well ABS does that for you.

it is still possible to drive your car without ABS but the light may be indicating something else that is wrong with your breaking system I recommend you have this checked by a certified machanic or dealership.

Nov 14, 2009 | 1995 Toyota 4Runner

2 Answers

Abs system


it is a failed wheel bearing.the hub and bearing comes with an abs sensor and when the bearing could not be located by the sensor it will turn on the abs light and make the car skip when braking.check to see if your not missing any brake fluid and that the truck is still able to brake.if all is good then change the faulty wheel bearing.if you dont want to invest right away just disconnect the connector for the abs to the bearing.braking will feel normal and youll just have the abs light on.

Oct 04, 2009 | 1999 GMC Jimmy

2 Answers

ABS LIGHTS


unplug the abs control module and check for water in the connector

Apr 16, 2009 | 1999 Dodge Intrepid

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...