Question about 2000 Chrysler 300M

1 Answer

Car wont shift from 2nd gear and speedometer doesnt work. diagnostic code p0700. what does this mean?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

The PO700 code is a generic transmission code. You would need access to a proper scan tool to check for transmission codes. However if you speedo isnt working, it sounds as though you have a bad output speed sensor. This part runs about 60.00 from the dealer, and is fairly easy to install. No speed signal will put the transmission into limp mode, and keep it stuck in 2nd gear.

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Dodge Stratus error code P0700 when the light comes on it wont shift out of 2nd gear. Where is the sensor located?


Code 700 is a generic code that means there is a problem with the transmission control module. It could be the module, or something else causing the module not to work correctly.
You would need a scanner and a repair book to get the test procedure.

Sep 15, 2015 | 2005 Dodge Stratus

1 Answer

What does 2005 equinox check engine codes p0700 and p0713 mean?


P0700 Transmission Control System Malfunction P0713 Transmission Fluid Temperature Sensor Circuit High Input Full list of the OBD2 DTC from P0700 to P0999

Jun 27, 2014 | Chevrolet Equinox Cars & Trucks

1 Answer

Why doesnt my nissan altima shift


Im assuming you mean that the vehicle wont move when put it in gear and its an automatic! Check the transmission fluid level if it is ok check if vehicle will move in any other gear reverse 1 or L etc. If not it maybe a torque converter issue and maybe best for a transmission shop to sort

Apr 14, 2014 | 2005 Nissan Altima

1 Answer

My 05 Pacifica went into "limp in" mode which means it is stuck in 2nd gear. I took it to AutoZone and put it on the code machine. It pulled up P0700, P0715, P0731 and P0733. I changed out hte Speed Sensor...


Well code 700 is a generic code that means there is a problem with the transmission or the control module. Code 731 is for a problem with first gear which would explain why it stays in second gear.
Someone will need to check the circuits involved with first gear and the trans control module. A shop manual will be necessary to get the testing procedures.

Jul 30, 2013 | 2004 Chrysler Pacifica

2 Answers

2002 jeep liberty auto trans check engine lte on code p0700 and will not shift of=ver 2nd gear when goes into 3rd gear it feels like in neutral


p0700 is pretty much the generic code for saying the computer that controls your transmission has a problem, it may not be the actual computer its self, but one of its sensores, or a bad wire, i would recomend taking it to a reputable transmission shop

Apr 03, 2011 | 2002 Jeep Liberty

1 Answer

Mi jeep liberty wont shift. It is stock on 1st gear p0700 codee comes out and it saya has solenoide b don work. I went to the agency and bought it but ave no club where it goes. Do anyone ave an idea where...


Hi. Error code P0700 actually tells you to check your PCM and not the TCM. some diagnostics tool will tell you the problem is the TCm but when in fact it is the PCM the you need to check.

Aug 15, 2010 | Jeep Liberty Cars & Trucks

2 Answers

Chrysler Concorde 1998 dies on idle


Speedometer quit working-consider vehicle speed sensor.

Apr 09, 2009 | 1998 Chrysler Concorde

5 Answers

Transmission faul code po700


(DTC) CODE # P0700....Transmission Control System (MIL Request)

Translation:
Transmission Control Module (TCM) Malfunction or Failure.

P0700 Information Code

The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM.

This code is for information ONLY. If this code is present, check for transaxle codes.

So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it. It needs to be scanned with trans capable scanner to see what the trans code or problem is. You should have 1st, 2nd, and Reverse because the car is operating in limp-mode. Since you said the speedometer doesn't work, my guess would be a faulty (VSS) vehicle speed sensor.

Oct 13, 2008 | 2000 Dodge Stratus

Not finding what you are looking for?
2000 Chrysler 300M Logo

1,409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...