Question about 1988 Ford Thunderbird

1 Answer

The blinkers on are ford don't work we tried to but in fuses but all the fuses work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

If the lights come on but just do not flash, replace the flasher relay. Your Thunderbird has 2 flasher relays. One for the Turn signals and one for the Hazard lights. The turn signal relay is located Front seating area, driver side, under dash, driver side of steering column, mounted in lower corner of fuse block . The hazard relay is located Front seating area, driver side, under dash, driver side of steering column, mounted in rear of fuse block. Replace the one for the Turn Signals. Information Curtorsey Auto Zone.

Posted on Nov 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford f 250


take the plugs and swap them u have the running light plug which are hazards and probly blinkers too. then u have ur tail lights and ur brake lights twwo plugs swap them sounds like ur not geting a got connEction

May 25, 2013 | Cars & Trucks

1 Answer

My blinkers don't work. Its an 87 ford tempo. Have extra fuses and stuff I've been told its all I need to replace and fix my car. Where do I start though?


make sure your fuses are ok and youve got power if ok check the blinker sender unit its usually round and silver with 2 or 3 wire going to it. usually under the dash but could be in the engine bay

Nov 19, 2012 | 1987 Ford Tempo

1 Answer

Both blinkers don't work but flashers do


There should be a flasher unit on the fuse box under the dash for the turn signals and another behind the dimmer switch for the hazards.
Sometimes one of the flashers is behind the fuse box in the glove compartment if equipped.
Don't be surprised if the flasher is not the problem. Most of the time the problem is the multi-function switch on the column.
There are stories online about using WD40 to take care of the switch problem.

Sep 12, 2012 | 1996 Ford Taurus

2 Answers

2005 Ford Focus- Blinkers, Brake lights and hazards don't work -just change the bulbs and they still don't work. Help!


That should be on two different fuses, but everything goes thru the turn signal switch.
The switch might be faulty. A mechanic would check for voltage there.

Jul 11, 2012 | Ford Focus Cars & Trucks

1 Answer

I have a 1990 Ford Taurus and my blinkers don't


blinkers sounds like the flasher unit is not working. It's located under dash. Also check for burnt out bulbs.
Rear defrost, or rear defogger?: Your defogger for the rear window would run off a relay, probably located in the fuse panel of your car. Often, the connections at the rear window get broke or disconnected.
Front defrost: does your heater blower work?

Oct 28, 2011 | 1990 Ford Taurus

2 Answers

Blinker do not work 1994 Ford Explorer, can it be a fuse, where is the fuse for the blinker


About your 1994 Ford Explorer 4.0L MFI 6cyl. the Flasher is located: Front seating area, driver side, driver side of steering column, behind access panel, mounted on fuse panel (for Turn signal).

Hope this helps.

Oct 05, 2011 | 1994 Ford Explorer Limited

1 Answer

Blinkers not working


Look under the dash for a panel of fuses open the lid and look inside the lid for a list of them and see which one goes to the blinkers, dimmer, or head lights check them all by pulling them out and looking thru them to see if the wire in them is broke if so replace it if not you may have another set under the hood try those as well you may have a relay switch in the fuse area as well looks like a little black square that may go to them that is bad as well if the fuses don't work you may need to get someone to check the relays

Sep 14, 2011 | 1991 Ford Tempo 4 Door

1 Answer

Ford ltd 77 blinker and taillights not working on left side don't know where fuse box is and/or which one to check


check your left side bulbs probably one that has a dual filament in the rear of your car

Jun 29, 2011 | Ford LTD Cars & Trucks

1 Answer

Blinkers and hazards don't work on my 1998 ford explorer what can it be ?


Assuming your battery is charged, ignition is on and the bulbs are all good

This sounds like a FUSE.

Be sure to check under the dash on both sides, drivers and passenger side.
Also under hood for any MAXI fuses...

Hope this helps you out.

Good Luck and Happy Motoring

Respectfully

Jun 08, 2011 | Ford Explorer Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...