Question about 1994 Ford Mustang

1 Answer

My engine light will not trun off on my mustang and itpassed saftey and etest how do i get it to trun off

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,596 Answers

You must First Be SURE that there is NO TRUE FAULT with the VEHICLE, meaning that if there is Fault codes they must be Corrected, as in Part Replacment for this Light to turn off and "STAY OFF". If this has ALL Been DONE Correctly,Then Even the Cheap CODE SCANNER can ERASE / RESET this Light, or You Can DISCONNECT the BATTERY for 1 Minute-<<(( I Do this for 1 hour) myself as SOME ECM's Will HOG RESIDUAL CURRENT thus Providing it with Enough Current to KEEP this CODE Alive in ECM for Longer than a few Minutes.

Posted on Nov 17, 2009

  • mynsawk Jun 23, 2011

    The car is to old for a code scanner like the newer cars. The older cars are analog while the new cars are digital readers

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will 05 mini cooper pass the etest if the engine light stayed on after oil change?


probably not--. use a scanner to reset the light first before going for the test.

Sep 10, 2014 | 2005 Mini Cooper

1 Answer

Engine starts but dies when i trun on the headlights


Have the charging system tested and the battery as well.

Mar 28, 2014 | 2007 Ford Mustang GT California Special...

1 Answer

1996 mustang starts up runs 2 seconds then cuts off already changed pump & filter any suggestions


Hi, when you trun key on is the anti-theft light blinking. re post and let me know thanks

Jan 07, 2011 | 1996 Ford Mustang

1 Answer

2002 ford mustang. Engine rotates, but wont start. Replaced battery


Check to see if the fuel system saftey switch needs to be re-set. It's a red push button located in the trunk on the drivers side just forward of the brake light under the trunk carpet. If it's popped up the fuel pump circut is cut off. Simply push the button to re-set.

Nov 05, 2010 | 2002 Ford Mustang

1 Answer

I have a 96 ford mustang Gt. When I push the clutch in the car wont start up. I have power and the battery and the fuses are good.


It should have a clutch saftey switch on the clutch pedal.Its a saftey feature simular to a neutral saftey switch it will only allow the engine to crank when the pedal is fully depressed.

Sep 07, 2010 | 1996 Ford Mustang

1 Answer

2000 Ford Mustang- Just had new tires, brakes ,tuneup and gas cap. Service engine light keeps going on.. never has before. Any ideas?


this light has NOTHING TO DO WITH MAINTAINENCE, what it means is that a malfunction has occurred in the electronic fuel injection system or the engines electronic emission control system, there are well over 200 such faults that trun this light on,when the light is turned on a fault code is set in the memory of the computer that controls the system, to find out what this code may be you must have a shop test the system, this is called an OBD2 fault code test, you may also have it tested by any Kragen or Autozone Parts store for free in most area's. This willgive u a code but not any info oon how to fix the problem that turned on the check engine light, for that u need a qualified technician

Jul 29, 2010 | 2000 Ford Mustang

1 Answer

LOCATION OF SAFTEY NEUTRAL SWITCH ON 66 MUSTANG


if it is a manual trans it is in the clutch arm under the dash and if automatic it is at the base of the steering column

Nov 28, 2008 | 1966 Ford Mustang

1 Answer

Timin


a1989vert: With the engine off, remove the SPOUT connector jumper. It lies just under the distributor and is rectangle shaped.
Connect timing light to #1 spark plug wire (Front passenger side)
Timing should be at 10BTDC. If not correct then loosen distributor bolt and adjust. When done, trun engin off, tighten dist. bolt and plug SPOUT jumper back in.

Brian

Jul 19, 2008 | 1994 Ford Mustang

1 Answer

Problem passsing the etest


What engine do u have?? 2.0 litre?

Most probably ur problem lies in the catalytic converter, which is part of the exhaust system.

Could also be leaky injectors which would cause the car to run too rich.

Fuel return line can't be blocked off, wouldn't make sense.

Jul 13, 2008 | 1993 Volkswagen Jetta

Not finding what you are looking for?
1994 Ford Mustang Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...