Question about 2004 Chrysler Sebring
I have a 2004 chrysler sebring 2.7L V6. there is a rectangular device in front of the transmission pan that drips oil. From what i can find, I think it's the transmission solenoid pack. Does it need to be replaced? Can a do it yourselfer do it? I need info on how to remove and replace, so I can decide if I can do it or not.
The solenoid blocks are known to leak. You will need to access this under the hood. The cooling lines well need removed from the trans, disconnect the input speed sensor, and remove it using a 1" deepwell socket. Remove the plug on the solenoid block, using an 8mm socket. You will see 3 tenmm bolts on the top of the Sol block. Remove these bolts, then gently pry the sol block off the trans. Using a scraper, remove all old gasket material from the trans case, be careful not to damage it, then thoroughly clean the mounting surface. Install the new Sol Block, with a new gasket, and torque to factory specs, re-install the input speed sensor (torque to spec), install the cooling lines, and reconnect the Sol Block 8mm screw, be sure to TORQUE all to factory spec, failure to do this could result in you damaging the new Sol block, or trans.Make sure to check the fluid level after the repair is complete, and you should have the TCM reset as well. It is fairly labor intensive, and for a first-timer, it will probably take you about 2-3 hrs to do this, provided you have the proper tools. Good luck.
Posted on Nov 17, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 11, 2014 | 2001 Chrysler Sebring
Aug 25, 2014 | 2004 Chrysler Sebring
Aug 17, 2011 | Chrysler Sebring Cars & Trucks
Apr 13, 2011 | 2001 Chrysler Sebring
Nov 29, 2010 | 2004 Chrysler Sebring
Nov 19, 2010 | 2004 Chrysler Sebring
Jan 03, 2010 | 2004 Chrysler Sebring
Dec 11, 2008 | 2004 Chrysler Sebring
Jul 03, 2017 | 2004 Chrysler Sebring
1,657 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: