Question about 1996 Mazda MX-6

1 Answer

How can I reset my immobilizer on MX6 1994 - 1996 Mazda MX-6

Posted by on

  • tigermancity Nov 17, 2009

    I will have to try this solution tomorrow as my car is stuck in airport car park. What % do you think it will reset

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

1. Disconnect negative battery terminal
2. Press on the brake pedal for about 30 seconds
3. Reconnect battery
4. Start the car but don't touch the gas pedal for one minute!

It is a good idea to reset the ECU/computer whenever an engine, fuel, or air intake modification has been done.
Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Nov 17, 2009

  • taran_2005
    taran_2005 Nov 17, 2009

    Thanks for your response!!

    I am pretty confident that it would fix the problem.

    Let me know the update.

    Thanks for using ' Fixya ' and have a nice day!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vw lt35 2.5 diesel 2005 i tried to find which fuse is gone while the ignition is turned on next thing immobilizer doesnt allow me to start engine ? please help!!!


use a scan toll to reset the immobilizer in the ecm
you disconnected the power fuse and that activated the immobilizer

May 29, 2016 | Cars & Trucks

1 Answer

No start . no immobilizer key light seen. when reconnect and connect battery key light appears then i can start. what causes this?


try using a scan tool to reset the immobilizer system
remember that every time the battery is disconnected the immobilizer activates

Sep 23, 2015 | Hyundai Cars & Trucks

1 Answer

The computer says the immobilizer coil is open/short


Did you reset the computer. Usually disconnecting the battery for about 10 minutes should do it. If this does not fix it, you need to recheck your work. Something you did has caused the message. Did you short circut a wire, burn a fuse, forget to reconnect something? The immobilizer probably works by immobilization of the vehicle's coil circut. Thus, causing the computer message to display about the coil issue. Try reset computer of vehicle should work.

Apr 05, 2013 | Volvo S40 Cars & Trucks

1 Answer

How to by pass the toyota fielder immobilizer


Disconnecting a battery cable for about 10 minutes resets computer of vehicle. This may help, maybe. It will also reset your radio stations so be aware. :.)

Apr 05, 2013 | 2003 Toyota Corolla

2 Answers

2005 Volvo S40 Immobilizer


you need a scanner having your car's program and to do the alarm reset to reset the alarm.

Aug 28, 2012 | 2005 Volvo S40

1 Answer

Anti theft immobilizer


For immobilizer reset procedure go through the link mentioned below.
Click the link:---
Immobilizer override and bypass? http://whatisbyme.blogspot.in/2012/05/2012-toyota-hilux-sr5-immobilizer.html

------------
How to bypass immobiliser? http://technoanswers.blogspot.com/2012/01/how-to-bypass-immobiliser-on-rover-200.html

----------
This will help.
Thanks.

Jun 05, 2012 | 2001 Toyota Sienna

1 Answer

2005 subaru outback immobilizer reset? Alarm was set with door being unlocked with key, immobilizer shut off all power. How can this be reset?


This could be a few things. If the security system was enabled and you just unlocked the door with a key and not using the remote, then all you have to do is put the key in the ignition and turn on/off three times. That's it!

Some cars have immobilizer keys. The immobilizer prevents unauthorized keys from starting the car (yours may or may not have it, depending on the exact Outback model).


Look here for the different styles of immobilizer keys:
http://www.cars101.com/subaru/keyless.html#immobilizer keys

Nov 09, 2011 | 2005 Subaru Outback

1 Answer

I used the wrong Honda key in my 07 Odyssey. The ignition is disabled.How can I fix,


PUT THE RIGHT KEY IN THE IGNITION SWITCH TURN IGNITION SWITCH TO ON POSITION UNTIL IMMOBILIZER WARNING LAMP ILLUMINATES FOR FEW SECONDS.KEY HAS RESET.IF IMMOBILIZER WARNING LAMP FLASHES RAPIDLY KEY DID NOT RESET.TRY TURN SWITCH ON WITH KEY UNTIL IMMOBILIZER LIGHT ILLUMINATES FEW SECONDS TURN OFF YOU READY TO GO GO GO.IF CANT RESET HONDA DEALERSHIP HAS TO USE DIAGNOSTIC EQUIPMENT TO RESET KEYS TO IMMOBILIZER MODULE.

Nov 07, 2010 | 2007 Honda Odyssey

Not finding what you are looking for?
1996 Mazda MX-6 Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...