Question about 2006 Hyundai Tiburon

1 Answer

I recently had the entire dash assembly as well as my airbags replaced on my 2006 hyundai tiburon se. Upon reaching nightfall I noticed my dashlights are not turning on(dimmly lit, though I believe this may not be the actual lights that are meant to light the dash) The sensor that gos off when the seatbelt is not engaged is not working. And both tail lights have ceased to work. I am wondering if possibly the wiring harness was not reconnected properly. I have checked all fuses, though I have no way of checking my relays. Any ideas as to what the problem could be?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Due to tight working space, it can be very difficult to apply the pressure required to connect the many wiring harnesses to the back of the BCM. It is very possible that some of these connectors were not fully connected.

The BCM is the box into which your fuses are plugged. There are a small number of connections on the front of it, but there are many more on the back. Remove the plastic trim from around the BCM, reach in behind it and make sure that every connector is properly connected.

The connectors will lock in place with a hefty 'click' sound when they're all the way in.

The problem could also be caused by other connectors in the dash, including the splice connectors.

Posted on Feb 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What brake pads where used on Hyundai Tiburon 06 SE?


OEM were these
http://www.carid.com/2006-hyundai-tiburon-brakes/powerstop-1-click-oe-replacement-brake-kit-31487698.html

Oct 31, 2014 | 2006 Hyundai Tiburon

1 Answer

I recently purchased a 2003 hyuandai tiburon GT with 171k miles on it i was on the interstate doing 80 mph in 4th gear at around 6k rpm when my clutch pedal dropped back into the floor board and just...


hmmm... 80mph @6000 rpm is not normal. you are needing a lot of power to produce 80mph. it seems clutch assembly needs replacement. clutch assembly includes clutch disc, fly wheel, and release bearing. might as well check your clutch master if the vacuums are still working properly. this might be the culprit to the stuck up clutch pedal.

after replacing the clutch assembly, you can reach 80mph @ 4000-4500rpm

Aug 06, 2011 | 2003 Hyundai Tiburon

1 Answer

How do I get my airbag light on my dash to go out on my 99 hy tib


Well from what i was told, is that when your air bag light stays on like that it means that your air bag system is not working properly and is not very safe to drive your vehicle. Just giving you the heads up

Jul 14, 2010 | Hyundai Motor 1999 Tiburon

1 Answer

2000 Ford Escort SE repair costs?


If you turn it into insurance this vehicle could be totaled out. Aribags are not cheap. You also have to replace the sensors and module, as they are NOT reusable. The passenger airbag could be part of the entire dash cover, Windshields I have seen as low as 120 installed. Theo., you could have 600-1000 tied up in doing it yourself. Fyi I hit a deer , did not hurt my winshield or airbags. Cost 2500 to repair.

Jan 14, 2010 | 2000 Ford Escort

2 Answers

2004 hyundai tiburon - why has my airbag light


See TSB 10006484 service notice for the air bag light.

Nov 10, 2009 | 2004 Hyundai Tiburon

1 Answer

Replace headlamp assembly for 2003 hyundai tiburon gt


You must remove the entire headlight housing assembly. Should be about four nuts on studs depending on what side you may have to reomove the battery. you will a 10 mm wrench or deep socket. the light socket then twist in and out and you splug in the bulb once you get tho that point it is prety simple.

Mar 14, 2009 | 2003 Hyundai Tiburon

1 Answer

Airbag light is on - 2003 Tiburon


section_closed.gif 2003 HYUNDAI TIBURON Recall ID from NHTSA: 02V290000 Auto Recall Date: NOV 05, 2002 Vehicle Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY Model Affected TIBURON Estimated Vehicles Affected: 7382 Recall Details Auto Recall Date: NOV 05, 2002

Vehicle Component: SEAT BELTS:FRONT:BUCKLE ASSEMBLY Estimated Vehicles Affected: 7382 Model Affected2003 HYUNDAI TIBURON

2003 Hyundai Tiburon Defect Summary:ON CERTAIN PASSENGER VEHICLES, THE DRIVER SEAT BELT BUCKLE WIRING COULD BE DAMAGED BY INTERFERENCE WITH THE DRIVER SEAT CUSHION HEIGHT ADJUSTER MECHANISM.

Defect Consequence:DAMAGED DRIVER SEAT BELT BUCKLE WIRING COULD CAUSE THE SEAT BELT WARNING LAMP OR THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG WIRING LAMP TO ILLUMINATE. IT COULD ALSO CAUSE THE AIR BAG FUSE (CAVITY NUMBER 5) TO OPEN, PREVENTING AIR BAG DEPLOYMENT. NONDEPLOYMENT OF AN SRS AIR BAG IN A CRASH WHERE AIR BAG DEPLOYMENT IS WARRANTED COULD INCREASE THE RISK OR SEVERITY OF INJURY IN A CRASH.

Remedy:DEALERS WILL INSTALL A NEW DRIVER SEAT BELT BUCKLE, IF NECESSARY, AND WILL PLACE A PROTECTIVE COVER OVER THE DRIVER SEAT BELT BUCKLE WIRING TO PREVENT DAMAGE FROM OCCURRING. OWNER NOTIFICATION BEGAN ON MARCH 24, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HYUNDAI AT 1-800-633-5151.

Estimated Vehicles Affected: 7382

Notes: HYUNDAI MOTOR COMPANY 056

Dec 07, 2008 | 2003 Hyundai Tiburon

Not finding what you are looking for?

Open Questions:

0 Answers

Shifting problems My car is a 2006 Hyundai Tiburon, Automatic, 2.0L 4 Cylinder I've had the car two years I don't know what's related and what isn't so here is the story. Bought car, (cruise control did not work) but everything else seemed fine, engine light came on code read Vehicle Speed Sensor so I bought an input and an out transmission speed sensor and had them installed, Motor blew 2 heads had motor replaced with an almost new motor. Cruise control now works, three days later car would not come out of park shifter moved but car stayed in park felt like shifting cable let loose, I called a backyard mechanic friend and he moved the shifter hard and it went into drive said probably buddy who changed motor forgot to unhook cable and stretched it (made sense to me) it did this everytime car was put into park had to yank on the shifter to get it to shift so I started parking her in neutral and it never messed up, after 3 weeks my new shift cable came in so I went to show my mechanic what car was doing it wouldn't do it worked fine, told him I'd call him next time it messed up this is a year and a half later hasn't messed up like that again! I had already bought the cable so I decided to have it installed anyways even though problem seemed fixed went to a shop they told me nothing is wrong with my cable..... Approx 6 months ago put car into drive and started driving the car reved out (I call it) motor got really loud and RPM gage went to 4K and car jerked really bad and made a really loud snap noise so I pulled over and roughley shift car into park and back into drive and drove this fixed the issue for that drive anyways.... my car one day over heated to red line in a 5 minute drive in the winter my mechanic said must be an air lock so he drained my fluid and replaced ect, next day car wouldn't start, blew starter, replaced that, next day driving car and in a 5 minute drive it overheated to red line took car to shop he said gage is reading wrong car is barely even warm so I decided to take the car home and worry about this issue pay day well the next day car wouldn't start, blew alternator, at this time my mechanic looked over car more closley turns out I had a bad ground so he put on new alternator and new ground, this was a month ago and no more issues with overheating or not starting. However I still have this issue (copy and paste) "put car into drive and started driving the car reved out (I call it) motor got really loud and RPM gage went to 4K and car jerked really bad and made a really loud snap noise so I pulled over and roughley shift car into park and back into drive and drove this fixed the issue for that drive anyways...." After having ground put on and shifting issue still there I took my car directly to Hyundai they ran all their computer tests and transmission tests and took car for a test drive car worked fine and only code that came up was Vehicle Speed Sensor. So here is where I stand first question how many speed sensors does my car have is a transmission input/output speed sensor different then a vehicle speed sensor? I looked on parts sites and only speed sensors I find are ABS speed sensor and Vehicle Speed Transmisson Sensor, so maybe sensors I bought are no good but they were bought new or maybe the connector for the sensors are bad? I don't know any suggestions would be greatly appreciated.

Jan 12, 2016 | 2006 Hyundai Tiburon

See all 2006 Hyundai Tiburon Questions

2006 Hyundai Tiburon Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...