Question about 2001 Volkswagen Jetta TDI

1 Answer

01 jetta runs good out of gear put in gear and let out the clutch and it misses and gives p0302 missfire on number two cylinder just replaced the clutch

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volkswagen Master
  • 6,826 Answers

The cylinder is coding a number two mis fire,this most likely is a plug,plug wire or coil.I would change the spark plugs and the spark plug wires.If this does not help,the coil could be breaking down,or a injector.I would then,run a bottle of lucas fuel treatment,and see if it is a injector,that is clogged.If the injection cleaner does it job,it will clear it up.If this was at all,helpful,please let us know,thank you.

Posted on Nov 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Missfiring detected in OLDSMOBILE intrigue 2002 3.5L


For engine misfiring problem check the help links mentioned below. Click the link below to go through the troubleshooting procedure :---- Engine misses and truck jumps? Hard to down shift? Issue with high gear only? http://technoanswers.blogspot.in/2012/02/engine-miss-and-truck-jumps-hard-to.html

-----------
Bad miss at idle?

http://technoanswers.blogspot.com/2012/01/bad-miss-at-idle.html

-----------
While stop engine idles like cylinder missing?

http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html

------------
Engine Misfire codes for car?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html
Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

--------------
Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

-----------
Oil on spark plugs and car misfires?

http://technoanswers.blogspot.in/2012/02/oil-on-spark-plugs-and-car-misfires.html

----------

This will help.

Thanks.

Jan 30, 2012 | 2002 Oldsmobile Intrigue

3 Answers

Missfire


This issue may be cause by a restricted catalytic converter on that side of the vehicle and quite possibly will only affect one cylinder. The other option is a vacuum leak around that particular cylinder.I have seen the converters cause this a few times. Why it's only one cylinder it affects is beyond me logically speaking it should affect the whole bank on that side sometimes it does affect multiple cylinders on the same bank.I guess it may just depend on how restricted it is.

Jun 26, 2010 | 2001 Ford F150 Styleside SuperCrew

2 Answers

P0302 #2 cylinder miss fire code. Replaced plugs and wires but at 40 mph runs very rough. Idles smoothly but not when put in gear.


I have a 1999 ford escort 2.0, its got a miss on cylinder 3 and 4. I changed the wires and the coil pack but its still missing. When scanned I get code p1506, p0303 and p0304

Jan 02, 2010 | 2000 Ford Windstar

2 Answers

My 96 honda accord is giving me three different code readings they are: P0303 cylinder 3 missfire, P0302 cylinder 2 missfire & P1300 multiple missfire detected, How do I fix this problem?


I would start with a full tune up. If it has never been done then that is the best way to start. Make sure that you gap your plugs. NGK plugs are the best for any and all Honda's. Let us know how it goes.

Aug 30, 2009 | 1996 Honda Accord

1 Answer

No pressure clutch pedal goes straight to the floor 1988 holden r


If hydraulic actuated mechanism, loss of fluid, defective master cylinder or slave cylinder at the clutch. Missing pin or other part between slave cylinder and clutch arm. Loose or broken slave cylinder mounting. Missing pin or broken part between pedal and master cylinder. If mechanical linkage, look for broken components or missing pins at moving joints. If you tried to shift into gear with engine running, you may have damaged the transmission gears.

Aug 11, 2009 | 1993 Isuzu Rodeo

1 Answer

CODES P0302 - P1000 - and P1313 any solutions?


Hi.....

The code P0302, Missfiring detacted at cylinder # 2.
The Code P1313, Catalystic Damaged Bank A , due to Missfiring.
The code P1000, Transsmission check Not completed. during test.

OK. The Important of this problem is, Check the Engine compression on the Cylinder 2.
If the compression is GOOD, Maybe you cen solve the problem Making a TUNE-UP.
But if the compression is LOW, You will need to spend Mony to REBUILT THE ENGINE or HEADS.

OK.. The catalystic come Damaged due to the Missfiring, And will need to replace.

The code P1000. You need a transmission compatible scanner to see if there a code on the Trans.

OK... I hope this help on your question


Thank you for use fixya.....

Sep 25, 2008 | 1999 Jaguar XJ

Not finding what you are looking for?
2001 Volkswagen Jetta TDI Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...