Question about 2000 Ford Ranger SuperCab

1 Answer

Hi I have a 2000 Ford Ranger and the air bag light is flashing

Hi I have a 2000 Ford Ranger and the air bag light flashes a code of 2-7. Any suggestions?????

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 35 Answers

The light (on the key switch) that indicates whether the passenger airbag is on or off is, more than likely, burned out. You can either replace the whole switch ($$$) or you can take it apart and solder a new led into the circuit board. You can get the bulb at radio shack (make sure it is 12v). Good Luck!

Posted on Nov 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 ford ranger 3.0 airbag flashes 3.4 what does this mean and how do i fix it thanks in advance


Sorry Josh but this is one you need to take to a repair shop . The air bag system requires special tools for diagnosing an it is possible to deploy an air bag without wanting to . People have been killed not knowing what they were doing . The light flashing means there is a problem with the system an there are DTC'S diagnostic trouble codes stored in the air bag control module !

May 16, 2015 | Ford Ranger Cars & Trucks

1 Answer

Air bag light 2003 ford explorer 2 4


You need professional software to get the SRS Codes

Your not resetting anything

Your retrieving codes & diagnosing a possible system
failure.

Sep 18, 2013 | 2000 Ford Ranger SuperCab

1 Answer

Air bag light flashing on 1999 ford ranger


well, if your air bag light is flashing then your system is already disabled. You have no worries about it deploying on you or anything, it just means that there is a problem that needs to be resolved before the system will activate again and work. Just like a check engine light, the air bag computer will have a stored code that can be read with a code reader, not like the ones you can use at a parts store though. You need to have your codes read and that will tell you where the problem is.

Apr 21, 2013 | 1999 Ford Ranger SuperCab

1 Answer

97 ford expedition air bag code flashes 2 1. What does that mean?


Code 21 is for the passenger side air bag circuit. Could be the air bag, the seat sensor, or a wiring problem.

Aug 06, 2012 | Ford Cars & Trucks

1 Answer

I have a 2000 Ford Ranger w/ a code 19 flashing on the dash, The bags were blown , have replaced them and the air bag computer still have a code 19 Any ideas?


you will have to replace the Restraint Control Module to clear the error. Until then the airbag should not deploy in a crash. It should be located under the radio.

The part will run in the neighborhood of $100

Oct 22, 2009 | 2000 Ford Ranger SuperCab

1 Answer

Air bag sensor keeps flashing


If a concern is detected, the air bag control module will communicate by flashing the warning indicator. A diagnostic trouble code (DTC) is logged by the air bag control module in a nonvolatile memory. For additional information, refer to Diagnosis and Testing in this section.
Lamp Fault Codes (LFC)
Item Part Number Description 1 One flash cycle: Driver air bag trouble code 2 Two flash cycle: Passenger air bag trouble code 3 Three flash cycle: Trouble code common to both driver and passenger air bag circuit 4 Four flash cycle: Safety belt pretensioner trouble code common to both driver and passenger pretensioner circuits 5 Five flash cycle: Driver side air bag trouble code 6 Six flash cycle: Passenger side air bag trouble code 7 Not used 8 Not used

Apr 10, 2009 | 2001 Ford Focus

3 Answers

Air bag light


You can't reset it. It's flashing a code. If you tell me the code, I can tell you the proceedure to isolate the fault.

when you start up, there is an 8 second system test and the light is on during this period. Then it flashes out a 2-digit code. The first group of flashes is the first digit and then there is a pause before the second group of flashes which represent the second digit.

flash-flash-flash-pause-flash-flash-flash-flash-flash-flash = code 36

What code is your system flashing?

Jan 18, 2009 | 1996 Ford Aerostar Extended

2 Answers

Air bag sensor


A possible solution. i have a 2002 ranger in which the air bag light would present itself. i discoved that the passenger air bag indicater bulb was out if i had the airbag on or off. its located next to the key switch. i pulled it appart and notice the bulb was bad. replacing it fixed the problem. there is a catch. this bulb is solderd to the circuit board and you have to get it from radioshack. is a simple task if have a solder kit. hope that helps.

Jan 08, 2009 | 2002 Ford Ranger Regular Cab

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...