Question about 2002 Nissan Frontier Crew Cab

2 Answers

Transmission issues with 3rd and 5th gear

So I have a 2002 Nissan Frontier. My issue is concerning my manual transmission. When I am driving and go from 2nd to 3rd I notice a significant change in the way the truck sounds. When I say sound I'm talking about how loud I hear the engine revving. For some reason my 5th gear just started making even more noise. I can still drive in those gears but it is quite a concern since it's the only automobile available at the moment. Any thoughts or ideas or suggestions?

Posted by on

  • cmex4life Nov 18, 2009

    Ok cool thanks alot guys I will take a look under the truck next chance I get and will let you guys know which if either solution works

  • cmex4life Nov 18, 2009

    oh also I have just got the transmission fluid changed out and the rear diff. as well so I don't think it is the fluid level but will still look under tranny to see if its broken off somewhere.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

It's weird but it's the problem!!! There is a switch on the transmission near the selector, usually only affects 3rd gear!!! The switch is being distorted after repetitive battering with gear selection!!! I have experienced it and also read about it in australia on a Navara!!!

Posted on Nov 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 819 Answers

Check the fluid level. check the transmission mount. i have seen these transmissions actually break at the mount, causing the fluid to leak, causing noises and vibrations.

Posted on Nov 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 mazda protege standard transmission popping out of third gear why


likely having the same issues as many others warn internal 3rd gear, with service records showing you took care of the vehicle, Mazda customer service may assist with repairs. It has been an issue with 3rd and 5th gear

Shifter pops out of 5th gear Here are the pictures to why

Apr 09, 2017 | Mazda Protege Cars & Trucks

1 Answer

1998 nissan altima with manual 5 speed transmission is stuck in 5th gear and will not come out. any ideas?


if cables are used to change gear to the gear box check those

shift stick bush worn ..remove center console

internal gearbox shift rods syncro / scroll pin broken

clutch system master or slave or pressure plate issue

26305420-3e2421cvrq3gbi5qdx1z4rjm-3-0.jpg26305420-3e2421cvrq3gbi5qdx1z4rjm-3-2.png

Oct 08, 2016 | 1998 Nissan Altima

2 Answers

1st 3rd and 5th gears are spongy to shift into


Start with the firs post and have those cables and linkage assembly looked at if those are good then what you have is a loose bolt on the transmission that bolt is responsible to keep the gear in place when loose the transmission will do what you described as well nothing more nothing less.

Mar 28, 2014 | 2003 Mitsubishi Lancer

1 Answer

2003 chevrolet cavalier, manual transmission lost 2nd, 4th and reverse but still has 1st, 3rd and 5th gears.


Sounds like one of the levers inside the transmission is either broken or otherwise disengaged. Remove the shifter to see if you can see any obvious reason.

Aug 25, 2012 | 2003 Chevrolet Cavalier

1 Answer

2005 Altima SE is missing 3rd gear


I know this is an older post but I just replaced the solenoid in my 05 altima and the same thing with 3rd gear. I was wondering what you did to fix it?

Aug 15, 2012 | 2005 Nissan Altima 3.5 SE

1 Answer

Transmission issues


Transmission can be tricky to rebuild it depend on your ability, good second hand unit always quicker and easier to fit

Jun 02, 2012 | 1998 Nissan Frontier

1 Answer

No 5th gear or reverse


I have a 1998 Nissan Frontier, 2wd. I was driving back from lunch one day, and the 5th gear stopped working. Then the next day, the reverse stopped working. It switches into 1st, 2nd, 3rd, and 4th just fine. Please help. What do you think it could be. I have no money to take it to the shop

May 28, 2012 | 1998 Nissan Frontier

1 Answer

After the coolant leaks into the transmission, which apparently is normal, and my transmission guy has replaced everything and it still turns off 4th gear........what do you do?


Mazie, Slater, Katz & Freeman, LLC is putting together a class action lawsuit against Nissan Motor Company related to issues where a leak from the radiator into the transmission is causing radiator and transmission failure. This problem is prevalent on several 2005, 2006 Nissan Frontier, Xterra, Pathfinder models. My vehicle is a 2006 Nissan Frontier. Please share your information so Nissan will have to accept responsibility for their defect. Go to www.transmission-lawsuit.com to share your details.

May 06, 2010 | 2005 Nissan Frontier

Not finding what you are looking for?
2002 Nissan Frontier Crew Cab Logo

737 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...