Question about 2003 Ford F150 Regular Cab

3 Answers

I need help with replacing the driver side window in a 2003 ford f-150,four door super crew cab truck.

Posted by on

  • johnsalyards Nov 16, 2009

    I am not changing the regulator I am specifically just replacing a broken window after a theft and need to know how to get the window in and adjusted correctly.

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You can follow the instructions in this video specially if you have a Fiat Panda: Power window fail in Fiat Panda 1 2 169 Save up to 120 How to fix it...

Posted on Apr 26, 2018

Ad
  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Contributor
  • 1,326 Answers

There is a lot involved, I would recommend purchasing a chiltons/haynes manual at your local auto parts store for $20. You need to remove the regulator assembly, the trim, the small window frame and the actual window track. A window company takes about an hour to replace it so with no exp, I would expect 2-3....

Posted on Nov 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

Removal & Installation
Motor - Front Door

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the window control switch
  3. Remove the front door trim panel and watershield.
  4. Tape the window in the full UP position.
  5. Disconnect the window motor electrical connector.
    NOTE Support the window motor while removing the window motor retaining screws.
  6. Remove the window motor bolts and remove the motor.
  7. To install, reverse the removal procedure.
Rear Door
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the window control switch.
  3. Remove the rear door trim panel and the rear door trim watershield.
  4. Remove the door speakers.
  5. Tape the window glass in the full UP position.
  6. Disconnect the window regulator electric drive.
  7. Position the connector for the window regulator electric drive inside of the door.
  8. Remove the bolts.
  9. Separate the window regulator electric drive from the rear door window regulator.
  10. Remove the window regulator electric drive from the door.
  11. To install, reverse the removal procedure.

Motor & Regulator

I need help with replacing the driver side window - 3d4a07e.jpg

Fig. Front Door Trim Panel

7932e42.jpg


Fig. Rear Door Trim Panel-Crew Cab


ReI need help with replacing the driver side window - 506866e.jpg - Power Windows

5068I need help with replacing the driver side window - db15984.jpgass=

Fig. Window regulator arm nuts


db15984.jpg

Fig. Window regulator bolts

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the window control switch.
  3. Remove the door trim panel.
  4. Remove the door speaker.
  5. Remove the door watershield.
    NOTE Do not remove the window glass from the door.
  6. Remove the window glass from the window regulator.
  7. Tape the window glass in the full UP position.
  8. Disconnect the window motor electrical connector (power windows only).
  9. Loosen the window regulator arm nuts and pull the arm from the mounting position.
  10. Loosen the bolts and remove the window regulator.
  11. To install, reverse the removal procedure.

Hope helped with this. Good luck.

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why did I loose all power to windows and locks in both doors?


On the drivers door. There is a boot that goes between the body and door. You lost power or ground there. Don't try to fix it there, besides soldering a wire to the body side. Then run a wire to the inside of the door that is broken. Cut and splice it inside the door.. Much easier. Otherwise, pull the door off the vehicle and good luck...

Aug 18, 2014 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Replace driver side power mirror on 2003 ford crew cab f-150


Muth makes the signal mirrors for repalcing the glass in the mirror head. On the site, they have nice instructions you can use for removing the door panel, and getting the mirror off ( obviously stop at the removing the glass part, and just replace with the mirror head you already have ).

Enter the Make, MY, and model you have, and on the products page are the links to the PDF version of the instructions for download.

www.kwmuth.com

May 19, 2010 | 2003 Ford F150 Regular Cab

1 Answer

I own a 2000 ford f-250 my driver side window was shattered so i took it into a mechanic and he replaced the window i havent used the truck much in the last 18 months because of other problems but i just...


Parts stores sell door panel removal tools. Just watch for hidden screws in the door panel. The passenger side motor is replaceable, just involves removing the door panel and removing the power motor. The regulator may need lubricated, I'd do the drivers side after you get the glass out.

Mar 06, 2010 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Need to replace F250 passengers side mirror.


take the door panel off there is 2 to 3 bolts holding it on

Feb 15, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

2003 ford f350 lariat crew cab drw speedometer not working


http://arrc.epnet.com/autoapp/8687/chiltonimages/8687/86876136L.gif

Jul 09, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

Cant find the blend door actuator on 2003 ford f150 super crew


The temperature blend door actuator is located on the right side of the transmission hump under the evap. case. The floor ducts cover it.

Jun 21, 2009 | 2003 Ford F150 Regular Cab

Not finding what you are looking for?
2003 Ford F150 Regular Cab Logo

592 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...