Question about 1993 Dodge Stealth

1 Answer

I need to know how to disassemble the cylinder heads off of a 93 dodge stealth

Posted by on

  • tcb2978 Nov 16, 2009

    i have a bent valve in my # 4 cylinder. i want to get both of my heads rebuilt. going to do it myself but want to know exactly what needs to be done.

  • yadayada
    yadayada May 11, 2010

    U will need a factory serivce manual for this.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Better get a manual, it involves taking most of the top end of the engine apart, buy a gasket kit with all the trimmings, you will need new head bolts, anti freexe oil, involves removing both manifolds timing belt, valve train, you will need special tools and a couple of days,

Posted on Nov 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes antifreeze come in at spark plug on a 93 dodge stealth


Leaking sparkplug/valve cover gasket.

http://www.3si.org/forum/f1/removing-front-valve-cover-417346/

Nov 11, 2014 | 1993 Dodge Stealth

1 Answer

I need to change the head gasket on a 1993 dodge stealth


Too old to spend the money necessary on a head gasket,
that would be 3 time the value of the car


Have to take the motor apart

If you do yourself I guess, but not pay someone

Oct 15, 2012 | 1993 Dodge Stealth

1 Answer

93 dodge stealth dies when the clutch is pressed


have you tried adjusting the cylinder? there is a screw to adjust it by underneath the clutch pedal, had the same problem in my stealth

Jan 07, 2012 | 1993 Dodge Stealth

1 Answer

I put a timing belt on a 93 dodge stealth 3.0 dohc lined up the timing marks according to chilton and when i turn it over by hand it hits a valve and locks up, i also had a valve job done for bent valves


sucks to b that car it has to b reset find #1 cylinder and put the piston at the top of it's stroke then set timing n put back together start car

Jun 23, 2011 | 1993 Dodge Stealth

1 Answer

Where is a fuel pump relay located on a 1993 dodge stealth non turbo


the fuel pump relay on a 91 to 93 dodge stealth base and es models is in the passenger area on the passanger side of the car there a lil kick panel held by one screw behind a black cap pull the panel of and its right behind it.. its a gold box with wire harness connected at bottom. its a 2 part relay that controls ur fuel pump and engine managment system. email me at joshuaelliott2009@yahoo.com if u would like a pic of were it is at

Oct 23, 2010 | 1993 Dodge Stealth

1 Answer

On a 93' dodge stealth, where is the fuse box located that has the breaker and relay for the window, and how do you know which relay is which?


Here is a website that a free manual can be down loaded for your vehicle


http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

May 01, 2010 | 1993 Dodge Stealth

1 Answer

93 dodge stealth sohc ran fine one day then wouldnt start


first you must determine if it has fire, and fuel pressure if so then injector pulse. Any OBD codes???? you really need a scanner to go any further without guessing.

Sep 24, 2009 | 1993 Dodge Stealth

2 Answers

Clutch goes to floor will not engage


The bleeder is located on the slave cylinder at the bell housing of the transmission. Follow the clutch pressure line down to the bell housing, and you will find the bleeder. To bleed the system properly, you will need to have someone push the clutch in, and hold it until you open the bleeder, and close it again. Repeat steps until you have a good solid clutch pedal. Make sure to not let the fluid level in the reservoir get too low as it can **** in air, and you have to start all over.

Mar 30, 2009 | 1994 Dodge Stealth

Not finding what you are looking for?
1993 Dodge Stealth Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...