Question about 1984 Chevrolet Blazer

1 Answer

I need to know what kind of transmission my 84 s10 blazer has 4by4

Posted by on

  • David Moyer May 11, 2010

    Automatic, or manual?

  • yadayada
    yadayada May 11, 2010

    manual or automatic trans?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 174 Answers

Automatic or manual transmission? Does it have overdrive? If it's automatic and overdrive it's a 700 R4, If it's a non overdrive it's probably a 350 TH. Easy way to check is to look at the oil pan on the transmission. If it's a rectange then it's a 700, if it's a square with a corner cut off then it's a 350. If it's a manual then it's either a T4C or an S101. The s101 is an isuzu transmission, you should see a tag on it that will tell you which one it is. The identification of these by sight is a little harder to explain, there aren't any really easy identifications for them. Hope that helps

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

NEED TO KNOW WHAT TYPES OF TRANSMISSION WILL FIT IN MY S10 4X4 BLAZER


Well if you can find one from like a 4x4 s10 around the same year it will fit

Mar 18, 2013 | 1995 Chevrolet Blazer

1 Answer

Need to know bolt size transmission 1991 s10


The heads are actually 9/16, the bell housing bolts are standard, not metric. All the other bolts are metric.

May 04, 2010 | 1991 Chevrolet S-10 Blazer

1 Answer

What kind of oil and transmission fluid does it


Oil would be 5W30 according to GM but it would have enough mileage by now so that you could go heavier if you wanted, 10W30 or 10W40 if it burns some. The transmission would use Dexron II or whatever replaces it. Read the label on the back to make sure that what you are buying can be used as a substitute for Dexron II. Hope this helps.

Feb 21, 2010 | 1989 Chevrolet S-10 Blazer

1 Answer

What transmission is in my truck 84 blazer s10 2.6 l


this is best determined by the bolt pattern of the pan. draw out the pan as best can and mark the bolt holes. take to an auto parts store and they should be able to tell you.

Oct 16, 2009 | 1984 Chevrolet Blazer

1 Answer

My 1989 s10 chevy 4by4 vaccum hoses are not right one hose i dont know where it goes,and when i come to a stop my brakes seem to be holding the truck back.


the 4x4 vacuum hose goes to the canister by the battery. could be the rear end "holding" u back. especially if it is roaring.

May 05, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

S10 blazer tansmission


You have a 4L60E whick is controled by your ECM. It sounds like you need and new transmission, the sun gear in it has failed and is the weak point on this transmission. 
When you get a new transmission have them to a corvette servo upgrade. The part is only $45.00 and the shop should know about the upgrade. It will make your truck shift a lot more firmer but last longer. 
Here is a write up http://s-series.org/component/option,com_tech_article/Itemid,/item,6/task,item/
Good luck and hope this helps

Apr 09, 2009 | 2001 Chevrolet Blazer

2 Answers

My 84 blazer wont shift


Your 84 wiring harness is for the TCC ( transmission converter control) system.
On the left side of the carburetor (driver side) you should have 2 cables, one for the accelerator and the 2nd for the TV (throttle valve) control. You will need to adjust the cable for correct shift points. Under normal circumstances you will have 7 to 10 mm's extending beyond the cable adjuster block.
Should take care of the issue for you.
Let me know.
Regards,

Apr 05, 2009 | 1984 Chevrolet Blazer

1 Answer

1984 s10 catalytic converter


Catco makes a nice very in expensive Convertor
this one in link is a direct replacement for a stock 84 Blazer

http://store.summitracing.com/egnsearch.asp?N=700+303153+4294925024+4294908216+115+4294907470

if you are not all that mechanical take it to a muffler shop they are usually cheap to cut out and swap please make sure that your current exhasut is the still stock or you will need to know the diameter of the pipe they used

Feb 18, 2009 | 1984 Chevrolet S-10

1 Answer

1984 s10 2.8 manual trans. flywheel causes engine to vibrate


no should be same engine. check your engine mounts and tranny mount. how bad a vibration? sometimes after installing engine the trans gets shifted around and if mount was worn it will allow it to hit crossmeber and vibrate.

Jan 16, 2009 | 1984 Chevrolet S-10

1 Answer

Transmiision for 1994 Chevrolet s10 blazer


if its the rear seal where the driveshaft enters the trans you need a transmission output seal for the tailshaft housing.

Sep 24, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

483 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...