Question about 1995 Ford F250

1 Answer

1979 ford f250 wont start unless i put gas in CARB

1979 ford f250 wont start unless i put gas in the carb what is the problem V6 strait

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

First of all you have no carb its fuel injected, at least you know you have spark, now do you have fuel pressure??, is the fuel pump working?/ if you have fuel and pressure then you have to check signal at the injectors, so if you have fuel pressure and a good injector pulse the next step is to check the injectors, this may require removal, good luck

Posted on Nov 16, 2009

  • 1 more comment 
  • chrischri638 May 21, 2010

    This post was for a 1979 ford. The answer is for a 1995 ford! ????????????????

  • starrface May 21, 2010

    oops my booboo!!!

  • Chadster Dec 01, 2011

    We had starting issues. Two issues were identified. First, timing was way off because the vacuum component of the distributor was working improperly. Second, timing chain was extremely loose. Replaced timing chain (ouch), and replaced distributor. Of those teo solutions, my personal belief is that the distributor was contributing most to the starting issue. I say this only because when i had the vaccum component disconnected, i had an easier time starting the vehicle. Dont kow why, but when it was connected, i had issues until i replaced it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1979 ford f250 400cid is vapor locking after engine is shut off for a few minuets and then tried to restart. Carb. has been over hauled, pump and filter change. engine is not running hot. Vacuum leak?


When the carb was put on did you use the bakelite spacer which is about one quarter in thick. This keeps the heat from the carburetor and is much more efficient than the thin paper gasket. If there is a bakelite spacer be sure there is a paper gasket installed on each side.

Jul 27, 2017 | Ford Cars & Trucks

1 Answer

1979 dodge truck not pulling any fuel. Already replaced fuel pump and still won't start unless u put fuel in the carb.


remove the lift pump and make sure its not on the back of the cam ,it will never work like this ,then remove the pipe from the carb end and try putting some fuel down it to prime and wet the valves inside the pump ,if that doesnt work check for a porous pipe froim the tank to the metal pipe that runs to the pump ,if that doesnt work then look inside the tank ?

Jul 24, 2013 | Cars & Trucks

1 Answer

Truck wont start unless i put gas in carb and once it starts it wont stay running unless foot is on pedle


is this a carb model or a injection and what year and model would be of a help

Nov 12, 2012 | GMC Cars & Trucks

1 Answer

I got a1985 ford f250 with a 460 it will run for 30 secs and die I change everything to do with the ignition system and fuel system and still wont stay runnin


put so sea foam in carb let it sit over night start next morning should run fine it cleans out the carb get sea form at auto store runs about 10.99 a bottle just fill carb let sit

May 26, 2012 | 1985 Ford F 250

1 Answer

Wont start after sitting a few days unless primed with gas in the carb. Replaced fuel pump and filter


primer pump in carb is bad it's easy to fix and will need to buy carb kit to get it all it is is a small rubber piece that helps pump gas into the carb good luck.

May 20, 2010 | 1979 Ford F 350

3 Answers

1976 f250 truck sat for 6 yrs the gas has turned orange and smells like varnish this truck has an electric fuel pump i replaced the fuel filter and tried to start it several times with starter fluid ive...


hello, usually when gas sets in carb for a long time it turns into a varnish, you will have to take carb apart and clean all jets out, even the fuel pump may be clogged up, you will probably have to rebuild carb, unless you have access to air line to blow any and all jets, pretty much all passage ways, power jets, in other words you have a carb problem, you may need a new one, unless you have a strong solvent, that will break away any varnish or gum up.

Feb 06, 2010 | 1982 Ford F 250

3 Answers

1979 chevy step van 350 new fuel pump rebuilt carburetor wont sta


remove the fuel line from the carb, put it into a bottle, crank the engine, If the bottle has fuel in it the fuel pump is working properly, if not, check the filter, and the fuel lines to the tank!!!

Nov 02, 2009 | 1979 Chevrolet C/K 3500

2 Answers

1982 Ford F250 5.8L starting problems


82 should be mechanical pump,drivers side in front of engine by oil filter,filter is inside fuel line at the carb

Aug 10, 2009 | 1982 Ford F 250

1 Answer

Truck starts but will not idle


IT COULD POSSIBLY BE THE INTAKE GASKETS. FORD HAS A PROBLEM WITH THE GASKETS GOING BAD. IF THE CHECK ENGINE LIGHT IS ON AND GIVING YOU CODES PO171 AND PO174 I WOULD CHECK THE GASKETS BY SPRAYING CARB. CLEANER AROUND THE INTAKE WHILE THE ENGINE IS RUNNING. IF THE IDLE SPEEDS UP THEN THAT IS YOUR PROBLEM.

Dec 14, 2008 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
1995 Ford F250 Logo

Related Topics:

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...