Question about 2003 Dodge Intrepid
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If no screws or nuts holding it that you can see from outside, then just use a screwdriver or something and pry at the base where it is against metal.
Posted on Jan 04, 2009
Changing Spark Plugs
First off, on this model you don't have plug wires, you have coil packs with a boot and coil connected to the pack. The boot slides on the tops of the spark plug. The good thing about this is that you don't have to mark each wire to its location.
So to replace the plugs you need to disconnect the electrical connector to the coil pack and then unbolt the two bolts that mount the pack down, then remove the pack.
Next with a ratchet, an extension and a special spark plug socket, which has an insulator inside to protect the porcelain from getting cracked, remove the spark plugs.
Next step is to replace the plug, usually I slide off the boot from the coil pack and then remove the coil from inside the boot and slide the boot over the spark plug and start to thread the plug back in. Using this method allows to you feel if you are threading the plug in right. Then with a torque wrench you would torque the spark plug to the specs for the type of engine you have.
3.2/3.5L Engine (20 ft-lbs)
2.7L Engine (13 ft-lbs)
Next reinstall the coil pack with the two mounting bolts, it is only necessary to hand tigthen the two bolts. Then plug back in the electrical connector and continue this process on the next 5 spark plugs.
Changing Dome Light
To remove the map light bulbs you need to first remove the overhead console.
To do this you need to remove the screw at the front of the overhead console (which is more towards the front windshield).
Next you need to pry down on the rear of the overhead console and then disconnect the electrical connectors.
Then, with the overhead console pulled down, pull of the map light bulbholders and replace the bulbs.
Installation is the reverse of the removal process.
Posted on Apr 22, 2009
on your interior light switch (dimmer switch) just get in the vehicle close doors and turn the dimmer switch and that should do it
I’m happy to assist further over the phone at https://www.6ya.com/expert/john_2c7bb9c157d0baa8
Posted on Jul 04, 2009
the actuator for the dome light is actually located inside the lock mechanism. Have you checked to make sure the dome light override button is in the out position?
Posted on Jul 17, 2010
Tips for a great answer:
Oct 03, 2012 | 1999 Dodge Ram
Sep 30, 2011 | 2003 Dodge Neon
Apr 11, 2010 | 2000 Dodge Intrepid
Nov 12, 2009 | 2001 Honda Civic
Oct 21, 2009 | 1990 Dodge Shadow
Oct 18, 2009 | 2001 Honda Civic
Sep 19, 2009 | 2002 Dodge Intrepid
Aug 14, 2009 | 2001 Pontiac Sunfire
Jun 10, 2009 | 2001 Dodge Intrepid
163 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: