Question about 1996 Honda Accord

1 Answer

No heat, i have flushed the coolant, putin a new thermostat, and the heater core works fine. The guy at the part store said it is either the switch on the cable from the heater core to the switch.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 318 Answers

Take a real good look at the temperature control knob. They strip out.

Posted on Dec 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Temperature gauge on max,very little heat coming thorough heater system


check your heater core and your thermostat. your thermostat first.

Feb 18, 2015 | 2005 Mini Cooper

1 Answer

97 Kia SPORTAGE : No heat, blower works, AC works,


Did you bleed your system of air???....usually a bleed screw near the thermostat housing...get allllll the air out...simetimes the heater core is at the highest oart if the system..therefore if there is air in system..thats where the air settles and no coolant will flow through the heater cire!!

Oct 01, 2013 | 2000 Kia Sportage

2 Answers

2001 Chevy Venture - My heat is not as hot as usual and blows cool when idle. Coolant level is fine. Temp Gauge isn't working.


Sounds like you need to have the cooling system flushed out then have them put a new themostat in it. If that dont fix the prob you might have to put a new heater core in it or radiator.

Jan 23, 2013 | 2001 Chevrolet Venture

1 Answer

How to back flush heater core 2007 grand prix


drain coolant system locate heater cores hoses going through firewall you need to buy the radiator flush kit at any auto parts stores. remove heater cores hoses from one end or buy extra long heater hoses same size as heater core hoses in vechicle at auto parts store use the flush kit when you flush through one of the heater core hoses let the other hose drain in a drain pan when you use home garden hose use low water pressure dont use garden hose to the max or you will rupture heater core. your best bet let radiator shop flush whole coolant system. because heater cores hoses are in a tight spot.make sure engine off if you just going to flush out heater core only .after flushing heater core good time to replace heater core hoses.if job too hard or complicated let radiator shop flush out radiator the engine block and heater core because if radiator stopped up or engine block stopped up the gunk and rust will reenter plug up heater core.if you tight on money you can flush out your own radiator.drain out radiator using large drain pan. remove top radiator hose and remove bottom radiator hoses connect to water pump.use garden hose with flush kit part with water pressure not too high put garden hose to top radiator hose run water until clear water run out bottom radiator hose in drain pan,the flush out engine block remove thermostat.if you had another spare thermostat housing with RTV SILICONE SEALANT THAT HAS SET UP INSTALL THERMOSTAT HOUSING BACK TO ENGINE WITHOUT THERMOSTAT FLUSH OUT THE ENGINE BLOCK, WHEN DONE INSTALL NEW THERMOSTAT THEN INSTALL ORIGINAL THERMOSTAT HOUSING WITH NEW ORING WHICH YOU BUY AT DEALERSHIP.IF ALL SOUND COMPLICATED LET RADIATOR SHOP FLUSH OUT COOLANT SYSTEM.

Nov 27, 2012 | 2003 Pontiac Grand Prix

2 Answers

HAVE FLUSHED THE SYSTEM AND INSTALLED A NEW THERMOSTAT. BLOWER WORKS FINE BUT VERY LITTLE HEAT. COOLANT LEVEL APPROPRIATE.


check water pump working and no leaks..might be vacuum line not opening the flapper door or heater core, or heater control valve

Jan 20, 2011 | 1989 Buick Century

1 Answer

I have no interior heat. Boiled over 2 weeks ago. had rad flushed and all new antifreeze. Worked for 1 week and then no heat at all. Replaced thermostat. Still no heat although all hoses are hot.


there is two things. one is low coolant the other and most likely is heater core is plugged flushing the coolant causes things to loosen up stuff and it gets stuck in the heater core if you take heater hoses off and back flush the heater core with a garden hose and you will have better heat then you ever had.

Dec 17, 2010 | 2003 Oldsmobile Alero

4 Answers

Dodge Ram 1500 - I have no heat. Will replacing the thermostat slove this? If so how do I replace the thermostat?


Hello, No! I'm assuming that the temp gauge is working in truck & you are not over heating. On the passenger side firewall check both hoses going to/from heater core. If both are not warm then it is probably a heating core plug. You will have to replace the heater core.

Jan 06, 2010 | 1996 Dodge Ram 1500 Club Cab

1 Answer

Heater not working (no heat)


If u have issues with heatting may be this will help.

1- If the carpet under the heater core is damp, or if antifreeze vapor or steam is coming through the vents, the heater core is leaking.Remove it and install a new unit (most radiator shops will not repair a leaking heater core.

1 - If the air coming out of the heater vents isn't hot, the problem could stem from any of the following causes:
  • The thermostat is stuck open, previnting the engine coolant from warming enough to carry heat to the heater core. Replace the thermostat.
  • There is a blockage in the system, Preventing the flow of coolant through heater core. Feel both heater hoses the firewall. They should be hot.if one of them is cold, there is an obstruction in one of the hoses or in the heater core,or the heater control valve is shut. Detach the hoses and back flush the heater core with a water hose. If the heater core is clear but circulation is impeded, remove the two hoses and flush them out with a water hose.
  • If flushing fails to remove the blockage from the heater core, the coremust replaced.

Nov 19, 2009 | 2003 Ford F250 Super Duty Crew Cab

3 Answers

I have a 2000 Jeep Cherokee and the heater does not heat


Check to see if the temp door is changing to heat,If that is fine,Then make sure the thermostat is good,maybe just replace it,and refill the radiator,and reservoir with coolant.The heater hoses going into the heater core need to be checked,while the engine is real hot,to make sure the heater hose going in the heater core,and out of the heater core are both to warm to hold by the naked hand.If only one of them is hot,and the other one is warm,to cold to the touch,then remove the heater hoses from the heater core,and use a water hose to flush the heater core out.Put the water hose in one side and flush the heater core out with the force of the water hose pressure.Then do the other heater core pipe the same way.Then replace the heater hoses back on the heater core,and refill the radiator.Make sure to get enough coolant back in the radiator.If there is not enough,the coolant will not flow threw the heater core and put out heat.I hope this is helpful,and you can do the work yourself.You may want to check those heater hose first thing.And change the thermostat anyway,sense you will have some coolant lose from flushing the heater core.If this helps,please let us know,thank you.

Oct 21, 2009 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Honda Accord Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...