Question about 2000 Honda Accord

1 Answer

I have a 2000 honda accord and the front drivers side window just fell down. I took the panel off and from what I see I assume the regulator is broken and there is a plastic part that the regulator cable is suppost to go over that looks like it was worn from the cable going over. Is this plastic part the cable travels over a seperate item or included in the regulator part?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 202 Answers

It should be all one piece when you get a new regulator

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stiff and slow driver-side window (not regulator)


Try lubricating the glass run channels with silicone spray.

Apr 26, 2013 | 2000 Honda Civic

1 Answer

1996 honda Accord drivers window stuck down


If you here a click when you push the switch up or down, then it could be your window regulator (motor). To change remove door panel, there should be 3 bolts holding regulator to door frame and 2 bolts connecting regulator arm to window.

Nov 17, 2009 | 1996 Honda Accord

2 Answers

My driver's side window has fallen into the door. I have a 2000 Honda Accord. The motor on the auto window is still running.


the regulator assembly is broken. Some vehicles use a cable guide while others use the old scissor style regulator/lifts.

Oct 05, 2009 | 2000 Honda Accord

1 Answer

2003 honda accord Power window


have the window regulator checked. If you are hearing clicking from both sides, your regulators are worn/damaged. Hopefully this helps

Jul 23, 2009 | 2003 Honda Accord

1 Answer

My driver's side window has fallen into the door. I have a 2000 Honda Accord. The motor on the auto window is still running.


Possible faulty window regulator. Pull panel and check if window guide(this holds the glass to regulator) on the regulator is damaged. Replace guide or regulator if damaged. Hopefully this helps

Jul 20, 2009 | 2000 Honda Accord

1 Answer

2000 Acura TL- Window won't go down in rear seat on driver side


It sounds like the cable has pulled off a pulley. You probably need a regulator, if you hear something every time you push it, then the motor may be fine. Take the interior panel off, make sure to look for hidden screws :>) and check regulator. You can do it if you take your time :>)

Jun 28, 2009 | 1991 Honda Accord

1 Answer

Drivers side front window


That is the window regulator. I have a 2000 G/A GT and both my front windows are broken due to GM using made-to-break parts. Dealership wants $400 each, and you can't just replace that little plastic piece, you have to replace all the guide wires too, I just propped my windows up with a board, they will fall constantly until you do. I tried wedging them, but that didn't work well. You can look for the entire regulator assembly online, but the $5 board worked great for me.

Apr 20, 2009 | 2000 Pontiac Grand Am GT

1 Answer

Replacing 99 Accord window regulator


Pull off door panel speaker and switches. lower the window to where you see the two or four 10millimeter that connect scissor mechanism to the window. Prop window all the way up and put a door stopper to prevent the window from falling down. Unbolt window motor, unplug window motor, and unbolt eveything else in the door. Pull it all down and out through the bottom largest whole, lay flat on ground the entire indoor mechanism, out where you can see it on the floor. Take a pic with camera, and proceed to swapping regulator, intallation is same as removal. Good Luck

Dec 28, 2008 | 2000 Honda Accord

Not finding what you are looking for?
2000 Honda Accord Logo

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...