Question about Jaguar X-Type

1 Answer

On my 2002 Xtype, my boot sensor light came on and both the boot and the car will not lock with the key FAB. When pressing tghe lock the car beeps twice and lights flash with no locking. The Boot will lock using the key inthe door to lock both manually. Does anyone have an idea? New sensor needed?

Posted by on

  • robinson_269 Nov 16, 2009

    Thank you. This information will help when I bring the car in to get repaired.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

It really sounds like you have an issue with the lock actuator for the boot. the sensor itself should be incorporated within the mechanism (similiar to rolls royce). these products are made by ford motor co. and prone to failure. have the mechanism replaced.

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

My key wont unlock my doors on a 2002 jaguar xtype


The door lock cylinders have either been replaced or the lock cylinders are frozen from rust and corrosion. Best bet is to spray some type of penetrating oil in the key hole and let it try to soak in and keep trying the key gently to work it loose, if that doesnt work, you can most likely get new lock cylinders or have a locksmith cut you keys for them

Jul 10, 2016 | 2002 Jaguar X-Type

1 Answer

Remote door lock sensor


you have a FAB sensor that is going out, seen this alot of times. there is a little black box under the dash, depending on vehicle that controls the key fabs, how many you have, and the functions of each. the FAB sensor is pretty much the brains of the FAB system and it is about the size of your palm or smaller. best thing is to just have it replaced. they go anywhere from $80 to $175 depending on the functions and if it needs to be programmed specifically to your vehicle. hope this helps

Apr 07, 2014 | Dodge Grand Caravan Cars & Trucks

1 Answer

Beep does not sounds when locking


Very possible. Each lock has to fully complete it's movement in order to send an "all lock" signal to transceiver. If not, you may wake to a dead battery as the alarm retries the last command to lock repeatedly.

Dec 25, 2013 | 2002 Toyota Sequoia

1 Answer

Beep when locking door


its possible .. get that closing relay control checked..or the control module also..

Dec 25, 2013 | Toyota Sequoia Cars & Trucks

1 Answer

The driver side door will not lock or unlock using key fab. Only the passenger and trunk will unlock. Cannot lock my car unless i manually lock my drivers side door, shut it then hit the lock on the key...


some how lever to the lock unit came off , need to open the interior panel of the driver door and put back lever to the lock unit. It should work.

Dec 14, 2010 | 2002 Toyota Celica

1 Answer

How to program a 2002 jaguar xtype remote


turn key from position 1 to position 2 four times quickly you will hear beep remove key prees any button on remote should get second beep all done

Nov 23, 2010 | 2002 Jaguar X-Type

2 Answers

2002 pontiac grand prix - power door locks


I do believe the 3 beeps are telling you that you are about to lock your doors. Additonally that should signal you that have your keys in hand before you locks your keys inside the car. It's just an aural warning reminder that your doors are about to be locked.

May 06, 2010 | 2002 Pontiac Grand Prix

2 Answers

Remote starter


I had the same issue with my remote start on another vehicle, the part that bypasses the code on the key had to be reset. The way we figured it out was everything was normal except the vehicle did not start & the security light flashed rapidly.

Nov 20, 2008 | 2003 Ford Expedition

2 Answers

Wont start


Inertia switch located on the passengers side (under the dash). You may need to remove a small door to get access to it. If you have not been in an accident, then it was probably tripped accidentally. Simply press the button, and it will reset. This should get your car running again. Good Luck!

Aug 19, 2008 | 2002 Jaguar X-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...