Question about 1999 Chevrolet Cavalier
Remove the splash shield that fits across the top (under the hood). You need to carefully pry the
six bolt-style plastic clips off that hold it.
The signal lamp assembly is removed by releasing a clip which is located between the headlamp assembly and signal lamp assembly. There is a slot in the top to insert a screwdriver. Push down on the clip and the signal assembly should slide right out.
Posted on Nov 16, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
is their a spring at the back of the light that hooks on to something (under bonnet) then light will just pop out,remember iam in spain and we dont have these cars here.or a screw down the side of the headlight
Posted on Jul 25, 2009
It sounds like you have the wrong bulb in the right side which will cause the relay to heat too quickly and cause rapid blinking.
Posted on Apr 03, 2010
to replace the the turn signal and headlamp bulbs, you need to pull the lights out from the front
to do so first you'll have to remove the plastic cover that spans over the radiator (there should be 6 push-in plastic clips holding it in, I use a wire crimping tool, but a couple flat screwdrivers or pliers if careful can work as well)
now, if it's just the cornering lamp that you need, then a large screwdriver or small pry-bar can be used to pop the lamp out
To see where to pry it helps to have a flashlight and look between the headlamp and cornering lamp, there's a clip that holds it in place, just pry against the clip [towards the center of the car, be firm as it is stiff, but if you just yank it, it may brake as it's plastic]
The clip should be around (though below) where the tip of the fender ends. The corner lamp should just pop out with enough prying
For future reference, replacing the headlamp bulbs you get to this point then remove the 2 bolts you can see the brackets the headlamps are mounted to, and they should then come out
Posted on Aug 03, 2010
Tips for a great answer:
Aug 19, 2014 | Cars & Trucks
May 19, 2010 | 1999 Chevrolet Cavalier
May 14, 2010 | 2002 Chevrolet Cavalier Coupe
Apr 03, 2010 | 2005 Chevrolet Impala
Aug 09, 2009 | 1999 Chevrolet Cavalier
Jul 25, 2009 | 1999 Chevrolet Cavalier
Sep 15, 2008 | 2001 Chevrolet Cavalier
527 people viewed this question
Usually answered in minutes!