Question about 2000 Volkswagen Passat 4Motion

1 Answer

How can I fix my headlight adjustment on a 00 passat when the screws to adjust them are broke? I don't know the name of the piece to be able to look for another one to buy

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

There should be a adjustment under the bonit you just keep turning it and youll find it just at the back of the light thanks ben

Posted on Nov 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reinstall headlight adjusters for 1970 Chevelle


Not sure I understand question. Do you need to just replace the adjuster? Remove trim ring from other side and match it. Are you missing the retaining spring? Is the headlamp bucket damaged? Usually when one thing is bad or in pieces, I'll disassemble another very carefully to see whats missing or broke. Parts stores usually have repair or "HELP" parts for just such problems.Good Luck

Oct 30, 2012 | Cars & Trucks

1 Answer

Adjusting bi-xenon headlights on Volvo S40


This guys don't know what they are talking about. If you have self leveling head lights and they are way out of alignment, yes there is adjustment screws but those mess with a different light bulb (daytime running light) instead of the main bulb alignment.

So what is a man to do? go to the dealer and have them adjust them for you. Believe it or not everytime you get an aliment done you have to recalibrate your headlights because they change the way the vehicle sits. Do it enough times and the headlight will go out of wack (because of the self leveling function)


In other words, they headlights are adjusted by means of a Computer. You could do it your self but you have to buy the DICE VIDA adjustment tool and the proper software from Volvo. Not cheap, just go to the dealership.

Jul 05, 2012 | Volvo S40 Cars & Trucks

2 Answers

How do you adjust headlights??


The best way to do it is to park your car in front on a garage door, a building or put a piece of plywood in front. Whichever you use, park you car at least 10 feet away; so you can tell if you are going up, down or in the middle when adjusting.
  1. Remove the four screws that secure the headlight trim bezel to the grille.
  2. Remove the headlight trim bezel.
  3. Turn the headlight high beams on.
  4. Adjust the headlights. Use the adjustment screws located along the outboard side and the inboard lower corner of the headlight bucket. Adjust the headlights until the beams are centered directly on the wall.
  5. Replace the headlight trim bezel.

Nov 15, 2010 | 1995 Ford Escort

1 Answer

How do i adjust my headlights?


  • Always adjust lights with optical headlight aimer VAS 5107, using detailed aiming procedure and specifications
  • Low and high beams are adjusted simultaneously.
98971520



Left headlight (adjustment screws for right headlight are mirror image):
1 - Lateral adjustment 2 - Height adjustment
  • Access adjustment screws through hole in lock carrier (Phillips head or socket head).
  • Turn the adjusting screws for lateral adjustment -1- and height adjustment -2- until the correct setting is achieved.
NOTE: Where equipped, ensure equal movement/function of headlights during automatic headlight range adjustment.

Oct 19, 2010 | 2001 Volkswagen Passat

1 Answer

I am trying to change a headlight. I can't can not


The headlight assembly (1993 Grand Caravan) is held in place with three plastic "wing nuts" that rotate on the ball-end (front end) of the adjusting screws. One "adjusting screw" (the one on the bottom, inboard side) is not for adjusting, just for mounting. The other two adjusting screws take a torx T15 in the front end of the screw.
Removing the headlight assembly is somewhat of a trick - it seems like it takes a special tool to reach the "wing nut" and turm it 1/4 turn (90 degrees) CLOCKWISE (so the "wings" are vertical). When all three of these mounting "wing nuts" have the wings vertical, the headlight assembly just pulls forward and off these mounting nuts. Place the new assembly back over the "nuts", turn the 3 "wing nuts" another quarter turn, and the new unit is mounted. Probably not even a need to re-adjust the headlights, but you should check.
The PROBLEM, is that it appears to take a special tool to reach and turn these wing nuts without breaking them (yes, the old ones get brittle). I tried a socket (did not work), and then long needle-nose pliers (broke one wing nut), then a 1/2" open-end wrench (which at least worked). However, pushing the new assembly back over the wing nuts, I broke another wing nut. So, I broke 2 of the 6, and one was broken when I started.
Now I need to find replacements for these "wing nuts" ... any ideas where to get them?
Of course I can use some washers, some nuts to fit the fine-threaded adjustment screw, and some sort of bushing (maybe cut a short piece of rubber tubing to fit over the adjustment screw). Place double nuts (second nut to lock the first in place) and a washer, then the bushing onto the adjusting screw, then the headlamp assembly onto the bushing, then add another washer, and two more nuts (not too tight) to lock it onto the adjusting screw (which must still be free to rotate). Repeat for each of the 6 mounting points. I have not tried this yet, but ... it should work.

Fabricate a tool to turn the "wing nuts" using a piece of 3/8 inch ID tubing which you file or cut 1/8 inch by 1/8 inch notches on each side of a diameter line.

Apr 22, 2010 | 1993 Dodge Caravan

2 Answers

How do you adjust car headlights?


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Sep 30, 2009 | 2007 Volkswagen Passat Sedan

2 Answers

VW Passat 1.6l 2000 (UK) Sudden failure of


check under seat, there are 3 sets of wires, they could be coroded, these wires run all the windows door, any thing that is for useing the power, i know just had it fixed 245, 00 later,,

Sep 09, 2009 | 1999 Volkswagen Passat

1 Answer

Headlight beam direction


Park the vehicle on a level surface, with the fuel tank about 1 / 2full and with the vehicle empty of all extra cargo (unless normallycarried). The vehicle should be facing a wall which is no less than 6feet (1.8m) high and 12 feet (3.7m) wide. The front of the vehicleshould be about 25 feet from the wall:
  1. If aiming is to be performed outdoors, it is advisable to waituntil dusk in order to properly see the headlight beams on the wall. Ifdone in a garage, darken the area around the wall as much as possibleby closing shades or hanging cloth over the windows.
  2. Turn the headlights ONand mark the wall at the center of each light's low beam, then switchon the brights and mark the center of each light's high beam. A shortlength of masking tape which is visible from the front of the vehiclemay be used. Although marking all four positions is advisable, markingone position from each light should be sufficient.
4dc0d0f.jpg

Fig. The head light alignment adjusters are located on the backof the assembly. Access holes are provided as necessary-2.0L Passat GLSmodel shown


Head lamps are adjusted from above. Do the following:
1. Open the hood
2. Look on top by the head lamps you should see two service holes (oneouter and one inner) where you will see a plastic adjustment screwwhich requires a hexagon wrench or a flathead screw driver that fits. Note the outer alignment screw is the hole located on top eg. driver side head lamps outter being the hole on the right side. innerbeing the alignment screw located in the hole on the left side of thedriver side head lamp assembly.
3. Lateral adjust/ horizontal adust is the right side hole.(which way to turn I've forgotten try incremental trial and error tilyou determine which way is left and which way is moving the beam to theright)
4. Vertical adjust is the adjustment screw located on theleftside of driver side headlamps assembly from above. turn counterclockwise to raise and clockwise to drop. its been awhile so i'm notquite sure .
5. Passenger side lateral and vertical adjust is symetrical. rememberoutter hole from above is lateral adjust and inner hole to the right inthis case for passenger side is vertical adjust.

More details: http://www.ehow.com/how_112704_adjust-headlights.html

Goodluck (remember rated this help).


Sep 04, 2009 | 2002 Volkswagen Passat

1 Answer

HEADLIGHT ADJUSTMENT


6mm or 7/32 alen wrench.the adjustment screw is on the top of the light,easily seen with the hood opened. counter clockwise will raise the light,clockwise will lower it.did my daughters car this morning,took about 1 minute.used a big piece of cardboard obout 5 feet in front of car. to raise drivers side to match pass side.easy fix.

Jun 16, 2009 | 2006 Chevrolet Cobalt

1 Answer

Hit a dog. headlight is out of adjustment


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Dec 31, 2008 | 2005 Volkswagen Passat

Not finding what you are looking for?
2000 Volkswagen Passat 4Motion Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...