Question about 2005 Mazda MPV

Open Question

2005 mazda mpv stumbles/bucks/stutters

2005 mazda mpv stumbles badly every now and then for about 1-2 seconds. Seems to happen when I decelerate off-throttle down to around 40-45mpg, then try to accelerate. It feels like the transmission is trying the top 3 gears at random. It smoothes out quickly and I won't see it again for days. Flushed the transmission, no change. No engine warning light; had it scanned anyway and nothing amiss.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 221 Answers

SOURCE: mazda 3 2005

Only way to know whats going on is to have the engine light checked with a OBD II diagnostic tool, there's a data link connector under the drivers side dash that it plugs into, you can buy one at most auto parts store's, or if you don't want to buy one some auto parts store's will check the engine light with a tester at no cost, for example auto zone, or you could take it back to the mechanic to see if he can diagnose the problem. The service engine light come's on when the pcm (powertrain control module) senses a problem. good luck !

Posted on Mar 31, 2009

Ad
  • 22 Answers

SOURCE: Proper way to dive 2000 mazda mpv

I don't have this problem,  but to slow the jackrabbit start of this machine   place the gear selector in [2] position and you will be rewarded with a very smoth if slow start off the line.  Excellent  for  very slipper conditions.   Don't forget to upshift after you are up to speed.

Posted on Apr 17, 2009

relaga58
  • 158 Answers

SOURCE: 2002 Mazda MPV won't go over 25 MPH

If it's manual your clutch is slipping.If engine related get it tune.

Posted on May 08, 2009

  • 1 Answer

SOURCE: When accelerating the engine seems to stutter.

Try unplugging your Mass Air Flow Sensor (MAFS) - you'll find it on top of the metal body immediately after the air filter. I went through an 18 month ordeal - replaced fuel filter, fuel pump, dropped fuel tank and cleaned it, ran 55 gallons of fuel injector cleaner through the system - nothing! After reading some blogs on this car/engine, gave the MAFS unplug trick a try. The car instantly corrected itself (when you unplug this sensor, the engine control module reverts to factory default, allows sufficient fuel into the engine for unitterupted performance.) However, if this corrects your problem, it's only a temporary fix. Run it about 3 days - it you notice soot in the tailpipe, the factory default is running too rich. Replace the MAFS.

Posted on Jun 02, 2009

  • 11 Answers

SOURCE: 2004 Mazda MPV, harsh automatic transmission at 2-3 gear

for better help with this go to mpvclub.com there are a great bunch of guys there, with ALOT of expertise.

Posted on Aug 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the condensator drain mazda mpv 2005?


bottom of the evaporator box normally facing to the center of the car tunnel
rubber hose about 1/2" dia

Sep 30, 2016 | 2005 Mazda MPV

1 Answer

Are the mazda 2003 mpv chain or cambelt


The '03 Mazda MPV LX Sport does 0-60 mph in 8.73 seconds and the 1/4 mile in 16.74 seconds at 81.41 mph
----------------------------------------------------------------------------------------

New Arrivals
Emergency power supply

Jan 15, 2013 | 2003 Mazda MPV

1 Answer

Need engine diagram for 2005 Mazda MPV 3.0L


I need information in locating bank 1 sensor 2 for my 2005 mazda mpv V6 3.0L

Dec 19, 2012 | 2005 Mazda MPV

1 Answer

Recall part list on 2005 Mazda MPV


Check with a dealer as well as put that question into google

Oct 06, 2012 | 2005 Mazda MPV

2 Answers

I have a mazda mpv 2000 minivan.problem code p0301 misfire detected cylinder#1


I'd check #1 spark plug.
Usually a misfire code "fix" is a spark plug, spark plug wire, or a coil pack / distributor.
Keeping it simple...I'd go with the spark plug first and then look at the condition of the wires.

Hope this helps...

Aug 28, 2011 | 2005 Mazda MPV

1 Answer

Four win stuck up for Mazda 2001. fuse is working


I have a 2000 Mazda MPV where the same thing just happened. Unfortunately it came back for a second, and my wife pushed one down. I took it to a glass shop, and found that the driver side power window switch was bad. It runs about $178.00 at the dealership. It takes about 2-3 days to order. Unfortunately not even the import places carry it. I did find a few used on Ebay for about $50-$70.

Aug 30, 2009 | 2000 Mazda MPV

1 Answer

2002 Mazda MPV won't go over 25 MPH


If it's manual your clutch is slipping.If engine related get it tune.

May 08, 2009 | Mazda MPV Cars & Trucks

Not finding what you are looking for?
2005 Mazda MPV Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...