Question about 2005 Toyota Corolla

1 Answer

When you change out serpentine belt should you change out other items?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 412 Answers

Dear Belt-Assassin..........first off......if you have successfully changed your serpentine belt on your corolla....CONGRATS!!! Welcome to the beautiful world of automotive repair!!!! When you change your serp belt its always a good idea to also inspect your pulleys and make sure none are bent or damaged in any way....also spin them to see if you have any excessive bearing noise....you can't miss that noise!!!!! It would actually sound like chaos with the engine runnin!!!! When ya change the belt.....a little attention to your internals of your motor wouldn't hurt....have you replaced the spark plugs? Those are quick and easy.....how bout the engine air filter? Cabin air filter? Oil and filter? Take a peek at your coolant....should have a colored tint to it....does it look diluted? If so take and extra 20 minutes and drain and refill that......a little love goes a long way with an internal combustion engine....HOPE I HELPED!!

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt keeps shredding on a 01 grand am. changed 2 of the pulleys.


Check the water pump, alternator, and a/c compressor pulleys for play and proper alignment. Replace any item that has play in the bearings.

Jan 14, 2015 | Pontiac Grand Am Cars & Trucks

1 Answer

I have a 2002 ford taurus and my serpentine belt keep breaking; afterwards I notice some smoke coming from that area and my serpentine belt felt hot to touch, can someone please explain to me why that...


something that the belt is driving is failing and putting extra load on the belt and it is slipping as it tries to drive that item. It may also be not tensioned properly. Remove the belt and turn each item by hand and they should all turn freely. The ac compressor will need the clutch to be activated but you will still be able to turn it by hand. Replace any that are stiff to turn

Jul 14, 2014 | Cars & Trucks

1 Answer

I need to change my serpentine belt on my 97 olds aurora. I need to find a diagram so i can replace it.


Hello susan922586,

Below is a diagram of the belt routing.

netvan_165.png

Item number 6 is the belt tensioner, using a 3/8 inch drive tool turn the tensioner clockwise to remove the belt. Insert the tool into the red opening.

I hope this helps.

Regards,

netvan

Aug 15, 2011 | Oldsmobile Aurora Cars & Trucks

1 Answer

Cant get the release for the serpentine belt to release


I have a 91 dynasty a 3.3l I just change the serpentine belt you need to buy a tool serpentine belt tool kit from harbor feight tools item # 66344 I bought mines on sale for $16.99. And also
make sure you got the right belt size for your car it list three belts
that will fit because my car was built before feb.17 1991. I was giving two wrong belts before I got the right one talk about hell on earth. had to change my alternator water pump that was the easy part.
I hope this help
:) Wil

Dec 28, 2010 | 1991 Dodge Dynasty

1 Answer

How to adjust a tensioner on a 2001 chrysler voyager


You mean your belt tentioner, serpentine belt, it is not adjustable if your belt is coming off you have a bad tentioner, bad pulley or your power stering pump is leaken and your belt is soaked, if oilly firts found your leak (most common is a hose from reservoir to pump) then replace belt with a cheap belt (had lost of trouble with Life time or hi dollar belts), in the mean time also inspect your tentioner if ani play side ways replace it, also remove idle pulley and spun it close to your ear, if any noise replace it, you may get away with a single item changed, but for trouble free time, replace all items: belt tentioner ($38) idle pulley($25) serpentine belt ($25)

Oct 17, 2010 | 2001 Chrysler Voyager

1 Answer

2002 mustang GT serpentine routing


Hope this helps ya.. Cobra... :-)
f9fd01b.gif

Item Part Number Description 1 10344 Generator pulley 2 8620 Drive belt 3 8A528 Water pump pulley 4 3D673 Power steering pump pulley 5 63126 Crankshaft vibration damper 6 2E884 A/C clutch pulley 7 6B209 Drive belt tensioner 8 19A216 Belt idler pulley 9 19A216 Belt idler pulley

Jun 14, 2010 | 2002 Ford Mustang

1 Answer

Serpentine belt diagrm


Not sure if you have the 3.0L 2V or the 3L 4V so heres both. Hope it helps.. Cobra,, :-)
Accessory Drive Component Locations 3.0L (2V)a0007698.gif
Item Part Number Description 1 10346 Generator pulley 2 8678 Belt idler pulley 3 3A733 Power steering pump pulley 4 8620 Drive belt 5 2E884 A/C clutch pulley 6 6B209 Drive belt tensioner pulley 7 6312 Crankshaft pulley 8 8509 Water pump pulley

Component Locations 3.0L (4V)a0007699.gif
Item Part Number Description 1 3A733 Power steering pump pulley 2 8509 Water pump pulley 3 2E884 A/C clutch pulley 4 8620 Drive belt 5 6312 Crankshaft pulley 6 6B209 Drive belt tensioner pulley 7 10346 Generator pulley

Jun 05, 2010 | 2000 Ford Taurus

1 Answer

Replace serpentine belt 1998 olds cutlass


Here's a link to a series of videos that will explain how to change the serpentine belt.

http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

Here is a diagram of the belt routing which will help you put the belt back on correctly...
18841fa.jpg

Dec 05, 2009 | 1998 Oldsmobile Cutlass

1 Answer

1996 Cherokee serpentine belt no moving.


Sounds like you have something locked up.

Take a picture/draw a diagram of serpetine belt routing.

Remove the belt, then try turning each individual item the belt powers to see which one is locked up.

I'd start with the AC Compressor first, then alternator, the belt tensioner, power steering pump, and whatever else is powered by the belt.

Sep 24, 2009 | 1996 Jeep Cherokee Country

1 Answer

Chage serpentine belt


Try watching this set of free videos to see if it helps to explain how to change the serpentine belt...
http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904_6/

I'm connecting you with video #6, but you can always go back if you like.

Aug 08, 2009 | 2006 Pontiac Montana SV6

Not finding what you are looking for?
2005 Toyota Corolla Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...