Question about 1997 Plymouth Neon

1 Answer

1997 plymoth neon

Nothing on the instrument panel working nor is the driver rear blinker changed bulb and checked fuses.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,674 Answers

I'm serious here, try giving it a bang on top of the dash above speedo, with open hand, and see if anything happens. Had same problem with my 95 but finally found fix. See if that makes everything come back on, and let me know, and I'll try to give you a step-by-step on remedy.

Posted on Nov 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 dodge neon the blinker on the drivers side is not working and its makes a buzzing noise.


this sounds like the flasher unit is no good and needs to be changed.it is located in the fuse panel under the dash on the drivers side.if you turn on the hazards and check all the bulbs for working,if they are working then you can look under the dash with the hazards on to find the flasher and this will show you what the signal flasher looks like at the fuse panel as they are two different units.

Apr 08, 2011 | 2000 Dodge Neon

2 Answers

Turn signals will not work. They stay solid on the dash when you activate them so i replaced rear and front bulbs and checked all fuse`s. Also checked the grounds on the wireing from the lights still...


you have a bad blinker canister, its usually under drivers side dash,a little round canister, turn your hazard lights on, you will hear clicking thats the canister for them, the other one is for your blinkers

Nov 16, 2010 | 1997 Buick LeSabre

2 Answers

We have no blinkers or flahers on a 1997 ford taurus and the fuses are good


Ford Taurus/Sable 1996-1999 Repair Guide
Flashers - REPLACEMENT

Check your flashers:

8054444.jpg

Fig. Fig. 1: Flasher assembly mounting
  1. Disconnect the negative battery cable.
  2. Locate the flasher assembly under the driver's side of the instrument panel and remove the flasher retaining screw.
  3. Detach the flasher from the connector and remove the flasher from the vehicle.
To install:
  1. The installation is the reverse of the removal.
Other details can find in the Ford-Taurus Owners Manual (page 124 and next)

Hope helps with this (remember rated this).

Jan 14, 2010 | 1997 Ford Taurus

2 Answers

My left break and blinker light don't turn on. I have a 2003 dodge neon. can this be a fuse and if it is which one is it?


If the left front light works,then you don't need a fuse you need a bulb for the left rear light.

Oct 22, 2009 | Dodge Neon Cars & Trucks

3 Answers

1997 GMC Sierra p/u. Brake light & blinker out. Lamp & fuse ok.


you probably got the wrong bulb
those are usualy a different number higher wattage, they look exactly like an 1127 but are a 2027 or even a 3027 check the bulb base it has the number printed on it

Aug 30, 2009 | 1997 GMC Jimmy

1 Answer

1997 GMC Sierra p/u. Brake light & blinker out. Taillights ok.


I have notice that this is a common problem. The socket most of the time goes bad, I don't know why but they just do. You can pick them up at any parts store for around 5.00 each. If you don't have a volt meter and ground straps to test it right, then I would try changing the sockets out. Quick and easy. Let us know how it goes.

Aug 30, 2009 | 1997 GMC Jimmy

2 Answers

Hazards and blinkers not working


There are separate fuses for the turn signals and blinkers, but you should check both of them just to see if they're good.

You may have a burnt out turn signal bulb as well. I know that this sounds like an obvious answer, but a single bulb can sometimes disable the entire system because of the way that some flashers operate.

You could also have a defective turn signal/hazard light flasher. This is located under the dash board on the driver's side between the steering column and the door. You have to remove the sound insulation/kick panel (the cover on the bottom of the dash board) to reach the flasher (it is easy to remove - I don't think you even need tools).

May 16, 2009 | 1997 Pontiac Grand Am

2 Answers

Right rear brake light and blinker dont work


when you use the right turn signal, does it blink faster?. Could it be the bulb holder is damaged or rusty?

May 16, 2009 | 2001 Plymouth Neon

Not finding what you are looking for?
1997 Plymouth Neon Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...