Question about 2005 Ford F 250 Super Duty

1 Answer

I have a 1999 ford f250 v-10 superduty and when i drive between 0 and 2000 rpms it has a stutter and a miss and has no power and takes about a minute to get up to 30 mph. Even when it is above 2000 rpms if you punch it to the floor it will and almost dies. You cannot even go up a 2% grade incline unless you are going about 30 mph,if you are at a stand still and try to go it will bog out and not let you move. We changed the mass airflow sensor,fuel filter,fuel pump and fuel regulator. HELP PLEASE!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

Replace the throttle position sensor.

Posted on Nov 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1997 Jimmy surges RPMs at 2000 RPMs and stutters when I start Moving. What could this be?????


I'm no professional but sounds like you need your carburetor cleaned.

Jan 29, 2012 | 1997 GMC Jimmy

1 Answer

1999 superduty ford tk no power to dome light


Check the fuses first. If they are ok then check the button in the door jamb to see if it is stuck in the open position(button in). Some of the newer models have the switch in the door latch itself and that is a nightmare to replace.

Nov 18, 2010 | 1999 Ford Super Duty F 550

1 Answer

My 1999 ford f150 truck with a 5.4 liter engine misses between 1000 and 1500 rpms but idles ok and runs ok at higher rpms


...and no check engine light? Could be a number of things. Start with a couple cheap things. Check the shart/large diameter vacuum hose on the back passenger sideof the engine. On top of the intake. Common vacuum leak.
Or get some MAF spray cleaner and clean the MAF sensor.

Feb 24, 2010 | 1999 Ford F150 Regular Cab

1 Answer

Stuttering 1999 f-150 Lightning


sounds like a bad coil or coils, you should have a scanner hooked to it and watch the data stream to see which cylinders are misfiring and then check the coils or if it has wires to each plug then check the plug wires . good luck, hope this helps.

Dec 19, 2009 | 1999 Ford F150 Regular Cab

1 Answer

1998 Ford Taurus Station Wagon SE


CODE P500 VSS NO SIGNAL.PROBLEM COULD BE CONNECTOR TO VSS IS SHORTED OR THE MAGNET GEAR ON TRANSMISSION DRIVE SHAFT COULD BE BROKEN OR MISSING TEETH.

Aug 04, 2009 | 1999 Ford Taurus

1 Answer

I have a 1999 Ford F-250 and it has a Banks Programmer on it. Anyway, it misses a little while it is just running but sitting still and when driving it starts stuttering around 1500 RPM's. Once you give it...


Put it back to stock programming, clear the codes and see what happens. Even though you will lose the extra power from the programmer at least it will run.

Mar 15, 2009 | 2004 Ford F250

1 Answer

No power steering 1991 superduty


1991 ford power steering pump after replacement should be bled off.you should rev the engine to about 2500 rpm before pump starts pumping and then turn the wheel from stop to stop several times.make sure the fluid is clean .if that doesnt help u need a box.

Jan 20, 2009 | 1999 Ford Super Duty F 550

1 Answer

1999 F150, 6 cyl.


Try cleaning the idle control Valve( IAC). Buy some brake cleaner and remove the duct work from the air cleaner system. start the truck and have somebody run it to about 100RPM and spray the cleaner directly at the valve. It is just inside the air cleaner.

Nov 11, 2008 | 1999 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...