Question about 1988 Chevrolet K2500

1 Answer

Passanger side turn signals don't work

Driver side turn signals work, but passanger side signals don't work. I have checked the bulbs and the bulbs are fine. Any ideas of what to do to fix it would be a big help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 16 Answers

First: press the brake and be sure that both sides light up. If one side does not, turn your attention to it. Remove the taillamp assembly from the suspect side and disconnect it. Unscrew the socket / circuit board and dismount it from the reflector. Take out the bulbs and examine the sockets, looking for melted / toasted / warped sockets. If they are bad, don't even bother trying new bulbs or attempting a repair; go to the parts store and get a new socket / circuit board assembly. Last I looked they cost about $25 apiece.

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My driver side turn signal wont work but the passanger side does I even tried changing the bulb. any answer would help thanks.


Chec relay..fuse..cud b switch or module tu. But dont guess and just buy parts. U can still u ur arm legally..take it slow

Dec 15, 2015 | Cars & Trucks

2 Answers

Dash and tail lights not workjng brake and turn signal on passanger side not working


The dash and tail lights are on two different circuits, and the brake and turn signals are on different circuits, so at least 4 circuits total.
I would start at the headlight switch and check for power on the first two issues.

Jan 18, 2014 | 1990 Buick Century

1 Answer

My passanger side break light will not work......


The light bulb has 2 operations, brake and tail lights. Go to Advance and they will replace it for you.

Feb 18, 2013 | 1999 Chevrolet Malibu

1 Answer

Passanger and third break light don't work, new bulbs and fuses installed. what should i check next?


I would check the turn signal switch first. The brake lights may go thru the switch depending on the configuration.

Aug 16, 2012 | 1992 Honda Accord

1 Answer

Right rear turn signal and break light one in the same not working replace bulb and still not working. All other lights and functions working the front passanger turn signal work fine. Id there a relay...


Check the new bulb make sure it is a 4157 bulb. If it is the correct bulb, try switching the left and right bulbs to see if the problem is still on the right side. Check the wiring on the right side, look for damaged or disconnected wiring.

Dec 26, 2010 | 2005 Chevrolet Cobalt

1 Answer

The drivers side headlight on my 2002 Saab won't


This is probably a problem with the orange headlight relay under the hood in the relay black box. Take the relay out and clean contacts and put back in. If does not fix, try a new relay or swap with another 9-5 to troubleshoot.

May 25, 2010 | 2002 Saab 9-5

1 Answer

I installed HID headlights and fog lights about 2 months ago and the passanger side went out. i took the drivers side bulb and put it into the passanger side to see if the bulb or the ballast was bad and...


The headlights run through a relay (#46) through the BCM. If the relay were bad (very common and has a recall) both lights would not work. Sooo, I'm thinking check the wiring and pigtail that goes to the bulb. People that use Silverstar halogeon bulbs will burn that wire and or the connector. Make sure these are sound, check for power at the connector too.

Apr 17, 2017 | 2007 Chevrolet TrailBlazer SS

2 Answers

95 lumina turn signals


make sure you replaced the correct directional light relay, and not the hazard relay. Check all fuses. check grounds at rear lights. If all of the following are good, your lumina would have a faulty multifunction switch.

Jul 22, 2009 | 1993 Chevrolet Lumina

1 Answer

Passanger headlight bulb inop


disconnected the HID ignighter. used a T20 to remove bulb cover. pulled out bulb and installed new bulb. DO NOT TOUCH THE BULB WITH BARE HANDS!!!

Nov 23, 2008 | 2004 Acura TL

1 Answer

Headlights on 1989 Nissan sunny


hi check your bulbs first but the problem is a bad ground or a faulty connecter look at the drivers side first clean all the grounds and connectors yates210456

Oct 12, 2008 | Nissan Z Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...