Question about 1999 Ford Ranger SuperCab

1 Answer

How much will it cost to repair bad reverse clutch in 99 4x4 ranger? why won't anyone answer my question?

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,982 Answers

Simpl;e answer is no one can accurately answer your question only because when rebuilding a transmission, it's not as simple as changing one single clutch pack. Although reverse is malfunctioning, chances are that most of the other clutches and internal parts are also worn.Any good rebuilder checks all seals, bushings, valve body and pump condition so that the unit does not need to be re-done a week after he does the job. Changing just the reverse clutches would inevitably lead to another failure very shortly.
I suggest you get an estimate for that work form several local shops and also check what kind of guarantee they offer, or find a scrapyard unit (though if bad, you will need to pay each time it needs to be removed and replaced if it does not work)
Opening up a transmission often is the same as opening a "surprise package" that is why no one can tell you what you'd like to know!!

Posted on Nov 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Ford Ranger clutch has no pressure


most cases it's a bad slave cylinder try and bleed the system just like bleeding brakes

Oct 01, 2012 | 2005 Ford Ranger

1 Answer

No reverse, first, second or third gears


well her in europe the parts for the repair cost 1500 euros and thats when the dealer will order them for you ,exchange box is the answer here i think cost 2500 euros with years warrenty ,sounds like the front clutch has gone

Sep 16, 2011 | Volkswagen Jetta Cars & Trucks

1 Answer

I have a 94 Ford ranger 6 cyclinder with 170K on it. This past week, I started to notice a shifting gear problem. When the engine is running I have a problem putting into gear sometimes, not always. when...


Check the clutch adjustment. If your system uses a clutch master cylinder, the release components are suspect.
Your description indicates that the clutch is not fully releasing. Worst case is new clutch and both bearings....not the end of the world but more costly than release systems..

Sep 21, 2010 | 1994 Ford Ranger Supercab

1 Answer

Automatic Transmission goes into all forward


check fluid if it is a dark color and stinks transmissions probably needs rebuilt sounds like low reverse or direct clutch is bad trna will still go into loe by using forward clutch if low reverse is bad shoul be having problems with 3rd or direct in forward if forward clutch is bad

Nov 11, 2009 | 2000 Ford Ranger SuperCab

1 Answer

1995 ford ranger wont go into gear grinds trying to go into reverse.


This is sign of a bad thrst bearing, try toadjust the clutch if not working, replace clutch, thrust bearing and pressure plate.

Jul 18, 2009 | 1998 Ford Ranger SuperCab

1 Answer

My 2004 ford ranger xlt 4x4 won't go into any forward gears, only reverse. When it does go in reverse the engagement is hard?


Sounds like the forward clutches and/or low-reverse one-way clutch. Either way it sounds like it's time for an overhaul

Jul 08, 2009 | 2004 Ford Ranger

3 Answers

My manual reverse gear on my '96 VW Jetta spits out the reverse and makes a grinding sound?


You have bad sycronizers in the gearbox. They are made of softer metal so they will wear out. They are used to smoothly shifte from one gear to another. How does the clutch feel? Any play in the shifter? Could be the clutch going bad, or play in the shifter also.

Jun 23, 2009 | 1996 Volkswagen Jetta

1 Answer

Need clutch replacement directions for Ford Ranger


Remove drive shaft,remove crossmember under transmission.Remove transmission and diconnect linkage.Remove bell housing,and clutch berring assembely.Remove bolts on pressure plate.Once this is done.Remove fly wheel for machineing.you will need a pilot shaft to alighn clutch assemblely.Possible one will come with new clutch and pressure plate.Reverse assemblely in same order remember to torque all your bolts with torque wrench.Take your time.

Apr 19, 2009 | 1994 Ford Ranger Supercab

2 Answers

1998 GMC Jimmy 4x4 lost reverse and is slipping in drive


You will to rebuild, sounds like low&reverse clutchs or direct clutchs are burnt, a used trans might be a thought.

Feb 21, 2009 | 1998 GMC Jimmy

1 Answer

1985 Ford Ranger clutch needs to be replaced


i could type you the directions step by step but i think it would take all night, if i where you , i just go to the local auto parts store and pick up a repair manual, they are real cheap

Jun 30, 2008 | 1985 Ford Ranger

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...